Sanyo POA-PN10 owner manual Mail Setting, Smtp Server*1, Administrator Address

Page 32

Basic Setting and Operation

E-mail Setting

This product has an E-mail function which can send an alert message to users or an administrator if it detects an abnormality on the projector or run out of the life span of the lamp. Click on the E-Mail Setting linked text on the main

menu and follow the below steps.

1 SMTP Server*1

Type the address of SMTP server for E-mail and press the Set button.

2 Administrator Address

Type the E-mail address of administrator and press the Set button. This address is set to "Reply-To" address sent from the projector.

3 Registering and delet-

ing E-mail addresses

Type the E-mail address to which an alert message is sent and press the Add button. The registered addresses are listed on the below column as the "Mail

To" address. To delete the registered addresses, press the Delete button next to the E-mail address you want to delete.

*1 The SMTP server is a server for sending E-Mail. Please contact your network administrator to have this SMTP server address.

✐To use the E-Mail function, it must be set the DNS address on the Network Setting page correctly.

✐You cannot use this E-mail function if the DNS server and SMTP server cannot be used in your network environment. If the SMTP server is located in your LAN (Local Area network), the address set to SMTP server should be specified the in SMTP server located in your LAN. The server located outside of your LAN may not be available for security reason. For further information please contact your network administrator.

✐Up to 10 e-mail addresses can be registered.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents PJ-Net Organizer Model No. POA-PN10Trademark CompliancesFederal Communication Commission Notice Expression/Abbreviation Use of this manualContents Use of Serial Port Features Power onWeb Management function Mail Alert functionControl port ready for external equipment via network Automatic On/Off using Timer functionMulti-control function Operating Environment Installation Installation Flow of installation Check package p.11 Installation p.12-14Name and function of each part Mounting Coin etcConnection of LAN cable Turn on the projector and display the menu on the screen Confirmation of network setting menu NetworkConfirmation of network menu activity Network configuration Procedure of Connecting the projector to the networkConfigure the network with the projector Selection of network menu NetworkHow to enter the numbers Restart the Network UnitConfigure the network with the computer Completing of installation Configure the network of computer Windows 98/95/MeWindows 2000/NT4.0 Windows XP Macintosh Installation Basic Setting and Operation Basic Setting and Operation Login or logout the setting page of the projectorLogin Enter the IP addressDisplay of main setting Logout Initial SettingsLanguage Setting Date/Time Setting Password SettingTemperature unit setting Configure the network Name the projectorMail Setting Administrator AddressSmtp Server*1 Registering and delet Ing E-mail addressesExamples Type and contents of alert mail When the lamp use time reaches preselect lamp use time When the internal power circuit is failedWhen the life span of lamp is reached Controlling the Projector Controlling the Projector Power on/off the projector Check the status of projector Control the projector InputPC Adjustment System Adjustment Image Adjustment Screen Adjustment Sound AdjustmentSetting Setting items and their operations are listed below How to set the Timer Select a day or dateSelect time Select an event on or OFFCancel the timer Getting the current timeService Save Actual Adjustment Adjust and set the controlsDisplay the current setting information Name the current settingControl the projectors menu To load the control setControlling the Projector Controlling the Multi-Projectors Controlling the Multi-Projectors Multi-Control Register IP address and projector nameDelete from the multi-control list Exclude/Add the projectors from/into the multi-controlAdd all of listed projectors into multi-control Load and apply the setting value Control multi-projectors at the same timeStatus Selection of another projector Use of Serial Port Serial port setting Use of Serial PortSerial controller Control Examples ExampleSerial Controller Use of Telnet ControlWhen the word Hello is replied, login has been successful Command list table Control the projector with TelnetConnection examples Web browser setting Technical data AppendixAExamples of Connection Peer-To-Peer connectionGateway Router installed in the network TheaterWeb browser setting Cookies enableActive Script/JavaScript enable Proxy settingSetting examples OS/Browsers Internet Explorer Cookies settingActiveScript setting Windows 95/98Proxy setting Netscape Navigator Cookies setting JavaScript SettingProxy setting Mac OS Proxy setting Netscape Navigator Cookies setting Proxy setting Product specification Applicable projector model listSerial port specification Port SpecificationLAN port specification Computer Input port specification HDB 15-pin connector VGAAppendix FAQ FAQ How can I restrict access from the computer Password/Login What should I do when I forget the password? English You can register up to 10 addresses Why am I not receiving E-mail alert messages? Can I update the firmware of the Network UnitWhat is the MAC address assigned to the Network Unit? What are the rules for IP address assignment?English Part No.610 306 1474 1AA6P1P3990-- Idlb

POA-PN10 specifications

The Sanyo POA-PN10 is a premium replacement lamp designed for select Sanyo projectors, particularly the PLC-XF47, PLC-XF48, and PLC-XF70 models. This high-quality lamp is engineered specifically to maintain the performance of these projectors, ensuring that users can enjoy vibrant and clear visuals in various lighting conditions.

One of the primary features of the Sanyo POA-PN10 is its high brightness output, measured at approximately 4000 ANSI lumens. This impressive figure allows the projector to deliver bright images, making it suitable for both small and large venues, including classrooms, conference rooms, and auditoriums. Coupled with a contrast ratio of up to 2000:1, users can expect deep blacks and vivid colors that enhance the overall viewing experience.

The POA-PN10 lamp utilizes high-pressure mercury technology to produce its luminous output. This technology is known for its energy efficiency and extended lifespan, typically lasting between 2000 to 3000 hours, depending on usage and operating conditions. Users can extend the life of the lamp by utilizing eco-mode settings, which reduce power consumption and heat generation.

In addition to brightness and efficiency, the Sanyo POA-PN10 is designed for easy installation and replacement. With a user-friendly design, it allows users to quickly swap out the old lamp with minimal disruption, ensuring that presentations and meetings can continue smoothly without extended downtime.

Another noteworthy characteristic of the Sanyo POA-PN10 is its high-quality construction. It is designed to meet strict performance standards, minimizing the risk of failure during critical presentations. Additionally, the lamp is rigorously tested for compatibility with Sanyo projectors, assuring users of optimal performance and reliability.

In summary, the Sanyo POA-PN10 stands out as an essential component for enhancing the capabilities of Sanyo projectors. With its high brightness output, energy-efficient design, and ease of use, it caters to the needs of both professional environments and educational settings. Users can expect longevity and quality, making this lamp a worthwhile investment for organizations looking to achieve superior visual presentations.
Top Page Image Contents