Sanyo POA-PN10 owner manual Control the projector, Input

Page 38

Controlling the Projector

Control the projector

Click on the Control linked text on the main menu. The control menu will be displayed on the lower side of the page. When you click each control icon, the control page is displayed according to the control menu you selected.

✐Please see the owner's manual of the projector to have the further information of each con- trol item.

✐The control page displays valid control items depending on the selected input mode, signal or functions of the projector you use, therefore, there may be different controls between the described items and actual control items on the page display.

✐When the projector is in standby, only the timer on the setting menu is effective; others are inactive.

Input

Select the input mode and source to the projector in this page. Select the input source with the radio button, and input source mode with the pull down menu. Then set the selected input source and source mode by

pressing the Set button. The available selections are listed below.

You can save your note regarding to the input mode and source in the comment text area. Press the Save button to save.

Input

Input Signal

Computer 1

RGB, RGB(Scrat)

Computer 2

RGB

Video

AUTO, VIDEO, S-VIDEO, Y, Cb/Pb, Cr/Pr

 

 

Select a source mode with pull down

Note:

This network unit is connected to the DVI terminal on the projec- tor, therefore, the digi- tal input does not be used when this unit is mounted. The RGB analog input of the Computer 2 can be used through the VGA terminal on the net- work unit.

38

menu.

Select a source with

radio buttons.

Page 37 Page 39
Image 38
Page 37 Page 39
Contents PJ-Net Organizer Model No. POA-PN10Trademark CompliancesFederal Communication Commission Notice Expression/Abbreviation Use of this manualContents Use of Serial Port Web Management function FeaturesPower on Mail Alert functionControl port ready for external equipment via network Automatic On/Off using Timer functionMulti-control function Operating Environment Installation Installation Flow of installation Check package p.11 Installation p.12-14Name and function of each part Mounting Coin etcConnection of LAN cable Turn on the projector and display the menu on the screen Confirmation of network setting menu NetworkConfirmation of network menu activity Network configuration Procedure of Connecting the projector to the networkConfigure the network with the projector Selection of network menu NetworkHow to enter the numbers Restart the Network UnitConfigure the network with the computer Completing of installation Configure the network of computer Windows 98/95/MeWindows 2000/NT4.0 Windows XP Macintosh Installation Basic Setting and Operation Login Basic Setting and OperationLogin or logout the setting page of the projector Enter the IP addressDisplay of main setting Logout Initial SettingsLanguage Setting Date/Time Setting Password SettingTemperature unit setting Configure the network Name the projectorSmtp Server*1 Mail SettingAdministrator Address Registering and delet Ing E-mail addressesExamples Type and contents of alert mail When the lamp use time reaches preselect lamp use time When the internal power circuit is failedWhen the life span of lamp is reached Controlling the Projector Controlling the Projector Power on/off the projector Check the status of projector Control the projector InputPC Adjustment System Adjustment Image Adjustment Screen Adjustment Sound AdjustmentSetting Setting items and their operations are listed below Select time How to set the TimerSelect a day or date Select an event on or OFFCancel the timer Getting the current timeService Display the current setting information Save Actual AdjustmentAdjust and set the controls Name the current settingControl the projectors menu To load the control setControlling the Projector Controlling the Multi-Projectors Controlling the Multi-Projectors Multi-Control Register IP address and projector nameDelete from the multi-control list Exclude/Add the projectors from/into the multi-controlAdd all of listed projectors into multi-control Load and apply the setting value Control multi-projectors at the same timeStatus Selection of another projector Use of Serial Port Serial port setting Use of Serial PortSerial controller Control Examples ExampleSerial Controller Use of Telnet ControlWhen the word Hello is replied, login has been successful Command list table Control the projector with TelnetConnection examples Web browser setting Technical data AppendixAExamples of Connection Peer-To-Peer connectionGateway Router installed in the network TheaterActive Script/JavaScript enable Web browser settingCookies enable Proxy settingActiveScript setting Setting examples OS/BrowsersInternet Explorer Cookies setting Windows 95/98Proxy setting Netscape Navigator Cookies setting JavaScript SettingProxy setting Mac OS Proxy setting Netscape Navigator Cookies setting Proxy setting Product specification Applicable projector model listSerial port specification Port SpecificationLAN port specification Computer Input port specification HDB 15-pin connector VGAAppendix FAQ FAQ How can I restrict access from the computer Password/Login What should I do when I forget the password? English You can register up to 10 addresses Why am I not receiving E-mail alert messages? Can I update the firmware of the Network UnitWhat is the MAC address assigned to the Network Unit? What are the rules for IP address assignment?English Part No.610 306 1474 1AA6P1P3990-- Idlb

POA-PN10 specifications

The Sanyo POA-PN10 is a premium replacement lamp designed for select Sanyo projectors, particularly the PLC-XF47, PLC-XF48, and PLC-XF70 models. This high-quality lamp is engineered specifically to maintain the performance of these projectors, ensuring that users can enjoy vibrant and clear visuals in various lighting conditions.

One of the primary features of the Sanyo POA-PN10 is its high brightness output, measured at approximately 4000 ANSI lumens. This impressive figure allows the projector to deliver bright images, making it suitable for both small and large venues, including classrooms, conference rooms, and auditoriums. Coupled with a contrast ratio of up to 2000:1, users can expect deep blacks and vivid colors that enhance the overall viewing experience.

The POA-PN10 lamp utilizes high-pressure mercury technology to produce its luminous output. This technology is known for its energy efficiency and extended lifespan, typically lasting between 2000 to 3000 hours, depending on usage and operating conditions. Users can extend the life of the lamp by utilizing eco-mode settings, which reduce power consumption and heat generation.

In addition to brightness and efficiency, the Sanyo POA-PN10 is designed for easy installation and replacement. With a user-friendly design, it allows users to quickly swap out the old lamp with minimal disruption, ensuring that presentations and meetings can continue smoothly without extended downtime.

Another noteworthy characteristic of the Sanyo POA-PN10 is its high-quality construction. It is designed to meet strict performance standards, minimizing the risk of failure during critical presentations. Additionally, the lamp is rigorously tested for compatibility with Sanyo projectors, assuring users of optimal performance and reliability.

In summary, the Sanyo POA-PN10 stands out as an essential component for enhancing the capabilities of Sanyo projectors. With its high brightness output, energy-efficient design, and ease of use, it caters to the needs of both professional environments and educational settings. Users can expect longevity and quality, making this lamp a worthwhile investment for organizations looking to achieve superior visual presentations.
Top Page Image Contents