Sanyo PLC-XT25 owner manual Remote Control, Wired Remote jack

Part Names and Functions

Remote Control

r	e w	q
t
y
u
i
o

!2

!1

!0

qSTAND-BY button

Turn the projector off (p. 22).

wWIRED REMOTE jack

Connect the remote control cable (not supplied) to this jack when using as a wired remote control.

wSIGNAL EMISSION indicator

Lights red while the laser beam is being emitted from the laser light window or a signal is being sent from the remote control to the projector.

rLASER LIGHT window

A laser beam is emitted from here.

tON button

Turn the projector on (p.39).

yINPUT 1 – 3 buttons

Select a input source (INPUT 1 – INPUT 3) (pp.29, 30, 40).

uAUTO PC button

Automatically adjusts the computer image to its optimum setting (pp.27, 32, 46).

iFREEZE button

Freeze the picture on the screen (p.27).

oPoint ed 78 ( VOLUME + / – ) buttons

–Select an item or adjust the value in the On-Screen Menu (p.23).

–Pan the image in Digital zoom + mode (p.38).

–Adjust the volume level (with Point 78 buttons) (p.26).

!0PRESENTATION POINTER button

Move a pointer of the projector or a pointer for wireless mouse operation (pp.13.14).

!1INFO. button

Display the input source information.

!2L-CLICK button

Acts as left mouse button for wireless mouse operation (p.14).

To ensure safe operation, observe the following precautions:

–Do not bend, drop, or expose the remote control to moisture or heat.

–For cleaning, use a soft dry cloth. Do not apply benzene, thinner, splay, or any other chemical materials.

14