Sanyo PLC-XT25 owner manual Another confirmation dialog box appears, select Yes

Select Reset and the “Filter counter Reset?” appears.

Select [Yes], then another confirmation box appears.

Select [Yes] again to reset the Filter counter.

Filter counter

NOTE: If the filter is heavily clogged and unable to clean, replace it with a new one. Consult your dealer for details.

Press and hold the filter cover and pull out the filter.

Filter cover

Filter

Filter cover

Filter

1 Press the MENU button to display the On-Screen Menu. Use the Point 78 buttons to move the red framed pointer to the Setting Menu icon.

2 Use the Point ed buttons to move the red framed pointer to Filter counter and then press the SELECT button. A dialog box appears showing the total accumulated time of the filter usage, Timer setting option, and the reset option. Select Reset and the “Filter counter Reset?” appears. Select [Yes] to continue.

Replacement Filter Part No.: 910-330-7184

Resetting the Filter Counter

Be sure to reset the Filter counter after cleaning or replacing the filter.

Do not operate the projector with the filters removed. Dust may accumulate on the optical elements degrading the picture quality.

Do not put anything into the air vents.Doing so may result in malfunction of the projector.

CAUTION

5 Reinstall the filter into the projector properly.

6 Reset the filter counter in the Setting Menu. See “Resetting Filter Counter” below.

WARNING: Do not wash the filter with water and any other liquid matter. Otherwise the filter may be damaged.

Turn off the projector, and unplug the AC power cord from the AC outlet.

First, clean up the dust on the projector and around the air vents.

Pull out the filter cover from the projector and then remove the filter.

Gently clean the filter by using a brush or blower.

1

2

3

4

Maintenance and Filter Cleaning

Cleaning the Filter

Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector. If the Filter warning icon appers on the screen and WARNING FILTER indicator is lit, clean the filter immediately. Clean the filter by following the steps below.

3	Another confirmation dialog box appears, select [Yes]
	to reset the Filter counter.

64