Screen Adjustment
Screen Size Adjustment (Computer Signals)
Select the desired screen size that conforms to the input signal source.
Normal
Provide the image to fit the screen size.
True
Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the Point ed78 buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear.
Wide
Provide the image to fit the wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used for providing a squeezed video signal at 16:9.
Full screen
Provide the full screen image.
For zooming in and out the images
Digital zoom +
Select Digital zoom +. The
Digital zoom –
Select Digital zoom
To exit the Digital zoom +/– mode, press any button except the D.ZOOM ed, SELECT, and Point buttons.
To return to the previous screen size, select a screen size from the Screen Adjustment Menu or select an input source from the Input Source Selection Menu
Remote Control
POINT ed78 
buttons
D.ZOOM | SELECT button |
button |
✔Notes:
•The projector cannot display any resolution higher than 1600 x 1200. If your computer’s screen resolution is higher than that, lower the resolution before connecting to the projector.
•The image data other than 1024 x 768 is modified to fit the screen size in initial mode.
•True, Full screen, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu. (p.31)
•The panning function may not be operated properly if the stored Mode in the PC Adjust Menu is used. (p.34)
•The minimum compression ratio can be limited depending on the input signal or when the Keystone function is working.
•Digital zoom +/– cannot be selected when Full screen or True is selected.
51