Sanyo PLC-XT25 owner manual Turning Off the Projector

Page 26

Basic Operation

Turning Off the Projector

1

Press the ON/STAND-BY button on the top control or

 

 

 

 

 

the STAND-BY button on the remote control, and

 

 

 

 

 

“Power off?” appears on the screen.

 

 

 

 

2

Press the ON/STAND-BY button or the STAND-BY

 

 

 

 

 

 

 

 

 

 

 

 

 

button on the remote control again to turn off the

 

 

 

 

 

projector. The LAMP indicator turns off and the POWER

 

 

 

 

 

indicator blinks green. After the projector is turned off,

 

 

 

 

 

“Power off” disappears after 4 seconds.

 

the cooling fans operates for 90 seconds. During the

 

POWER indicator is blinking green, you cannot turn on

 

 

 

 

 

the projector.

 

 

 

 

3

When the projector has cooled down enough, the

 

 

 

 

 

POWER indicator lights green again and you can turn

 

 

 

 

on the projector. After it is cooled down completely, unplug the AC power cord.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE

YOU TURN THE PROJECTOR ON, WAIT AT LEAST

FIVE MINUTES BEFORE TURNING IT OFF.

DO NOT UNPLUG THE AC POWER CORD WHILE

THE COOLING FANS ARE RUNNING OR BEFORE

THE POWER INDICATOR LIGHTS GREEN AGAIN.

OTHERWISE IT WILL RESULT IN SHORTENING

THE LAMP LIFE.

Notes:

•When the On start function is on, this projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.51).

•Do not operate the projector continuously without rest. Continuous use may result in shortening the lamp life. Turn off the projector and let stand for about an hour in every 24 hours.

•The running speed of cooling fans is changed according to the temperature inside the projector.

•Do not put the projector in a case before the projector is cooled enough.

•If the WARNING indicator blinks or lights red, see “Warning Indicator” on page 55.

•While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator becomes red to be turned on again.

26

Image 26
Contents Model PLC-XT25/PLC-XT20 PLC-XT25L*/PLC-XT20L Features and Design Compact Design Power ManagementTable of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandClean the Filter Regularly Air CirculationInstalling the Projector in Proper Directions Positioning PrecautionsMoving the Projector Transporting the ProjectorCompliance AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom Lens Cap Part Names and FunctionsFront Back Bottom Kensington Security SlotRear Terminal Reset button 4Infrared Remote Reciever BackTop Control Remote Control Wired Remote jack3MENU button Spotlight Pointer Laser Pointer FunctionPointer Function Wireless Mouse Operation Remote Control CodeAdjustable Feet Remote Control Battery InstallationRemote Control Receiver and Operating Range Attaching the lens to the projector InstallationLens Installation Removing the lensPositioning the Projector Moving the LensConnecting the AC Power Cord Projector side AC outlet sideConnecting to a Computer Digital and Analog RGB Cables used for connectionConnecting to Video Equipment Video, S-Video Connecting to Video Equipment Component and RGB Scart Selected Input Source and Lamp Control Basic OperationTurning On the Projector PIN Code Input Dialog BoxTurning Off the Projector Top Control How to Operate the On-Screen MenuRemote Control On-Screen MenuMenu Bar Information Operating with Projector ControlLens Operation Menu Operation Sound AdjustmentDirect Operation Operating with Remote Control Keystone button Timer buttonNo Show button Input Selection Input Remote Control OperationRemote Control button operation Top Control OperationRGB PC Analog RGB PC Scart RGB PC Digital Input Source SelectionInput Menu Video ComponentComponent Video System SelectionVideo or S-Video AV System Menu Video or S-VideoComputer Adjustment Helpful HintsPC System Menu Computer System SelectionSelecting Computer System Manually To store adjustment parameters Auto PC AdjustmentPC Adjust Menu Auto PC AdjManual PC Adjustment To clear the adjusted data To store the adjusted dataMemo Image Mode Selection Image Mode Selection Image MenuImage Adjustment Image Adjustment Image Adjust MenuNoise reduction SharpnessGamma ProgressiveTo reset the adjusted data, select Reset and press Screen Adjustment Keystone Screen AdjustmentScreen Menu Screen Size Adjustment Computer Signals Screen Size Adjustment Video, Component Signals Setting Pointer SettingSetting Menu Language Logo select Logo Logo and Logo PIN code lock settingsLogo Capture CaptureChange the Logo PIN code Change the Logo PIN code lock settingEnter a Logo PIN code Logo PIN code lockRemote control Display On start Power managementPower management Fan control Key lockPIN code lock Change the PIN code lock settingEnter a PIN code Lamp counter Change the PIN codeTest pattern Filter counter Factory defaultFactory default Filter counterMaintenance and Filter Cleaning RecommendationAnother confirmation dialog box appears, select Yes Lamp Replacement Reset the lamp replacement counterResetting the Lamp Counter Lamp counterProjector is shut down and all five indicators are blinking Then check the matters belowCleaning the Projection Lens Cleaning the Projector CabinetTroubleshooting AppendixAppendix Information Input Menu TreeInput Image SelectPC Adjust Screen SettingIndicators and Projector Condition Projector ConditionLamp Replace indicator After resetting the counterCompatible Computer Specifications ON-SCREEN Resolution31.47 59.94 Power Panel ResolutionSignal Compatibility Mechanical InformationAccessories Optional PartsPJ Link Notice Terminal Analog RGB Mini D-sub 15 pin Configurations of TerminalsUSB Connector Series B Terminal Mini DIN 8-PINPIN Code Number Memo Logo PIN Code Lock NoDimensions