Sanyo PLC-XE34 Installation Connecting the AC Power Cord, Projector side AC outlet side

Page 17

Installation

Connecting the AC Power Cord

This projector uses nominal input voltages of 100-240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.

If you are not sure of the type of power being supplied, consult your authorized dealer or service center.

Connect the projector with all peripheral equipment before turning the projector on.

CAUTION

The AC outlet must be near this equipment and must be easily accessible.

Note:

Unplug the AC power cord when the projector is not in use. When this projector is connected to an outlet with the AC power cord, it is in Stand-by mode and consumes a little electric power.

NOTE ON THE POWER CORD

Connect the AC power cord (supplied) to the projector.

AC power cord must meet requirement of the country where you use the projector. Confirm the AC plug type with the chart below and proper AC power cord must be used. If supplied AC power cord does not match your AC outlet, contact your sales dealer.

Projector side

 

AC outlet side

 

 

For the U..S..A.. and Canada

For Continental Europe

For the U..K..

 

 

 

 

 

 

Ground

 

Ground

 

 

 

 

 

To power cord

 

To the AC outlet.

To the AC outlet.

connector on your

To the AC outlet.

projector.

(120 V AC)

(200 - 240 V AC)

(200 - 240 V AC)

17

Image 17
Contents Network Supported Model PLC-XE34Features and Design Table of Contents To the Owner Safety PrecautionSafety Instructions Moving the Projector Safety Instructions Air CirculationInstalling the Projector in Proper Position Compliance AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom Front Part Names and FunctionsBack Bottom⑥ LAN Connection Terminal ⑦ Audio IN(Video Part Names and Functions Rear TerminalPart Names and Functions Top Control Part Names and Functions Remote Control Two AAA size batteries Remote Control Operating RangeRemote Control Code Positioning the Projector InstallationAdjustable Foot Cables used for connection Installation Connecting to a ComputerInstallation Connecting to Video Equipment Audio OUT Projector side AC outlet side Installation Connecting the AC Power CordFor Continental Europe For the U..K For the U..S..A.. and CanadaBasic Operation Input signal guidance windowTurning On the Projector Selected Input Source and Lamp ControlPIN Code Input Dialog Box Basic OperationDirect OFF Function Basic Operation Turning Off the ProjectorRemote Control Basic Operation How to Operate the On-Screen MenuTop Control On-Screen Menu⑦ Setting ④ Image adjustBasic Operation Menu Bar ① InputKeystone Correction Basic Operation Zoom and Focus AdjustmentAuto Setup Function Volume Basic Operation Sound AdjustmentVolume Dialog Box MuteBasic Operation Remote Control Operation No Show button Timer buttonImage button Screen buttonInput Menu Computer InputInput Source Selection RGB Computer 1/Computer PC System Menu Computer Input Computer System SelectionAuto ModePC adjust Menu Computer Input Auto PC AdjustmentTo store adjustment parameters Auto PC adjComputer Input Manual PC Adjustment Mode free ResetMode free Computer InputImage select Menu Computer Input Image Mode SelectionImage Adjust Menu Computer Input Image AdjustmentScreen Menu Screen Size AdjustmentPosition H/V Custom adjDigital zoom + Digital zoomInput Source Selection Video, S-video Video InputVideo Input MenuRGB Scart ComponentVideo or S-video Video Input Video System SelectionComponent AV System Menu Component Select Video , S-video or Computer 1ComponentCinema Video Input Image Mode SelectionImage button Dynamic Standard Cinema Blackboard Green Colorboard ImageTint Video Input Image AdjustmentColor Video Input Off Disabled Lower reduction Higher reduction ProgressiveStore Menu Noise reductionVideo Input Screen Size Adjustment Setting SettingSetting Menu Language LanguageAuto setup Auto setupInput search Auto KeystoneKeystone Power off? p.20Background DisplayDefault Logo Logo and Logo PIN code lock settingsLogo select Logo selectLogo PIN code lock CaptureCapture Logo PIN code lockChange the Logo PIN code Change the Logo PIN code lock settingEnter a Logo PIN code Rear CeilingTerminal ComputerDirect on Power managementShut down Timer Standby modeClosed Caption Remote control Lamp control Remote controlTo change the code for the remote control Lamp controlSecurity Key lock and PIN code lock Key lock PIN code lockKey lock PIN code lockEnter a PIN code Change the PIN code Change the PIN code lock settingVideo delay control Lamp counter resetFan Fan controlFactory default Factory defaultFilter counter Filter counterInput Source Information Display InformationThen check the matters below Maintenance and CleaningProjector is shut down and the Warning indicator lights red Filter counter Maintenance and Cleaning Cleaning the FiltersResetting the Filter Counter Cleaning the Projector Cabinet Maintenance and Cleaning Attaching the Lens CapCleaning the Projection Lens Reset the lamp replacement counter Maintenance and Cleaning Lamp ReplacementLamp replacement icon Lamp Replace indicatorService Parts No 349 Maintenance and CleaningAppendix TroubleshootingAppendix Indicator blinks or lights Remote Control doesImage is distorted or runs off PIN code dialog box appearsAppendix Appendix Menu Tree Information System AutoSettingImage select Image Adjust Screen Indicators Appendix Indicators and Projector ConditionON-SCREEN Resolution Appendix Compatible Computer SpecificationsAppendix Technical Specifications Optional Parts Appendix PJ Link Notice Terminal Analog RGB Mini D-sub 15 pin Appendix Configurations of TerminalsControl Port Connector D-sub 9 pin Logo PIN Code Lock No Appendix PIN Code Number MemoPIN Code Lock No Dimensions Appendix KJ2AC

PLC-XE34 specifications

The Sanyo PLC-XE34 is a compact and versatile LCD projector designed to meet the needs of various applications, from educational settings to business presentations. Known for its portability and robust performance, it offers a range of features that cater to users who require reliability and quality.

One of the standout features of the PLC-XE34 is its brightness capability, producing an impressive output of 3000 ANSI lumens. This level of brightness ensures that presentations and videos maintain high visibility, even in well-lit environments. The projector's 1024 x 768 XGA resolution provides clarity and sharpness, making it suitable for detailed graphics and text. This resolution strikes a balance between performance and image quality, appealing to educators and professionals alike.

The PLC-XE34 also incorporates advanced LCD technology that enhances color performance and reduces the occurrence of artifacts. With a contrast ratio of 500:1, it produces vibrant colors and deep blacks, which is essential for engaging presentations. The projector's ability to handle a wide color spectrum ensures that images are both accurate and visually appealing.

In terms of connectivity, the projector is equipped with multiple input options, including HDMI, VGA, and composite video, allowing it to connect seamlessly to various devices such as laptops, DVD players, and tablets. The inclusion of a built-in URL function simplifies the process of displaying content from the internet, catering to modern presentations that often require web access.

Portability is another flagship characteristic of the Sanyo PLC-XE34. Weighing in at just a few kilograms, it is easy to transport between locations, making it ideal for mobile professionals and educators who need to set up quickly. The user-friendly interface and remote control functionality enhance the convenience of operation, allowing users to navigate menus and settings effortlessly.

Furthermore, the PLC-XE34 boasts a long lamp life, reaching up to 4000 hours in eco-mode. This longevity reduces maintenance costs and the frequency of replacements, providing users with a cost-effective solution over time. The projector’s efficient cooling system also contributes to its reliability during extended use.

In summary, the Sanyo PLC-XE34 is a powerful and flexible projector that integrates effective brightness, advanced LCD technology, and a range of connectivity options into a portable design. Its combination of high-performance features and user-friendly operation makes it a compelling choice for anyone in need of a dependable projection solution. Whether for classroom use, business meetings, or casual presentations, the PLC-XE34 stands out as a noteworthy option.