Sanyo PLC-XE34 owner manual Maintenance and Cleaning, Then check the matters below

Page 59

Maintenance and Cleaning

WARNING indicator

The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance.

The projector is shut down and the WARNING indicator is blinking red..

When the temperature inside the projector reaches a certain level, the projector will be automatically shut down to protect the inside of the projector. The POWER indicator is blinking while the projector is being cooled down. When the projector has cooled down enough (to its normal operating temperature), it can be turned on again by pressing the ON/ STAND-BY button.

Top Control

WARNING blinking red

Note:

The WARNING indicator continues to blink even after the temperature inside the projector returns to normal. When the projector is turned on again, the WARNING indicator stops blinking.

Then check the matters below:

Did you provide appropriate space for the projector to be ventilated? Check the installing condition to see if the air vents of the projector are not blocked.

Has the projector been installed near an Air-Conditioning/ Heating Duct or Vent? Move the installation of the projector away from the duct or vent.

Is the filter clean? Clean the filter periodically.

The projector is shut down and the WARNING indicator lights red..

When the projector detects an abnormal condition, it is automatically shut down to protect the inside of the projector and the WARNING indicator lights red. In this case, unplug the AC power cord and reconnect it, and then turn the projector on once again to verify operation. If the projector cannot be turned on and the WARNING indicator still lights red, unplug the AC power cord and contact the service center.

CAUTION

DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER AN ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK.

Top Control

WARNING lights red

59

Image 59
Contents Network Supported Model PLC-XE34Features and Design Table of Contents To the Owner Safety PrecautionSafety Instructions Moving the Projector Safety Instructions Air CirculationInstalling the Projector in Proper Position Compliance AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom Bottom Part Names and FunctionsFront Back⑥ LAN Connection Terminal ⑦ Audio IN(Video Part Names and Functions Rear TerminalPart Names and Functions Top Control Part Names and Functions Remote Control Two AAA size batteries Remote Control Operating RangeRemote Control Code Positioning the Projector InstallationAdjustable Foot Cables used for connection Installation Connecting to a ComputerInstallation Connecting to Video Equipment Audio OUT For the U..S..A.. and Canada Installation Connecting the AC Power CordProjector side AC outlet side For Continental Europe For the U..KSelected Input Source and Lamp Control Input signal guidance windowBasic Operation Turning On the ProjectorPIN Code Input Dialog Box Basic OperationDirect OFF Function Basic Operation Turning Off the ProjectorOn-Screen Menu Basic Operation How to Operate the On-Screen MenuRemote Control Top Control① Input ④ Image adjust⑦ Setting Basic Operation Menu BarKeystone Correction Basic Operation Zoom and Focus AdjustmentAuto Setup Function Mute Basic Operation Sound AdjustmentVolume Volume Dialog BoxBasic Operation Remote Control Operation Screen button Timer buttonNo Show button Image buttonInput Menu Computer InputInput Source Selection RGB Computer 1/Computer Mode Computer Input Computer System SelectionPC System Menu AutoAuto PC adj Computer Input Auto PC AdjustmentPC adjust Menu To store adjustment parametersComputer Input Manual PC Adjustment Computer Input ResetMode free Mode freeImage select Menu Computer Input Image Mode SelectionImage Adjust Menu Computer Input Image AdjustmentScreen Menu Screen Size AdjustmentDigital zoom Custom adjPosition H/V Digital zoom +Input Menu Video InputInput Source Selection Video, S-video VideoRGB Scart ComponentSelect Video , S-video or Computer 1Component Video Input Video System SelectionVideo or S-video Component AV System Menu ComponentDynamic Standard Cinema Blackboard Green Colorboard Image Video Input Image Mode SelectionCinema Image buttonTint Video Input Image AdjustmentColor Noise reduction Off Disabled Lower reduction Higher reduction ProgressiveVideo Input Store MenuVideo Input Screen Size Adjustment Language SettingSetting Setting Menu LanguageAuto Keystone Auto setupAuto setup Input searchDisplay Power off? p.20Keystone BackgroundLogo select Logo Logo and Logo PIN code lock settingsDefault Logo selectLogo PIN code lock CaptureLogo PIN code lock CaptureChange the Logo PIN code Change the Logo PIN code lock settingEnter a Logo PIN code Computer CeilingRear TerminalDirect on Power managementShut down Timer Standby modeClosed Caption Lamp control Lamp control Remote controlRemote control To change the code for the remote controlPIN code lock Key lock PIN code lockSecurity Key lock and PIN code lock Key lockEnter a PIN code Change the PIN code Change the PIN code lock settingFan control Lamp counter resetVideo delay control FanFilter counter Factory defaultFactory default Filter counterInput Source Information Display InformationThen check the matters below Maintenance and CleaningProjector is shut down and the Warning indicator lights red Filter counter Maintenance and Cleaning Cleaning the FiltersResetting the Filter Counter Cleaning the Projector Cabinet Maintenance and Cleaning Attaching the Lens CapCleaning the Projection Lens Lamp Replace indicator Maintenance and Cleaning Lamp ReplacementReset the lamp replacement counter Lamp replacement iconService Parts No 349 Maintenance and CleaningAppendix TroubleshootingAppendix PIN code dialog box appears Remote Control doesIndicator blinks or lights Image is distorted or runs offAppendix Appendix Menu Tree Information System AutoSettingImage select Image Adjust Screen Indicators Appendix Indicators and Projector ConditionON-SCREEN Resolution Appendix Compatible Computer SpecificationsAppendix Technical Specifications Optional Parts Appendix PJ Link Notice Terminal Analog RGB Mini D-sub 15 pin Appendix Configurations of TerminalsControl Port Connector D-sub 9 pin Logo PIN Code Lock No Appendix PIN Code Number MemoPIN Code Lock No Dimensions Appendix KJ2AC

PLC-XE34 specifications

The Sanyo PLC-XE34 is a compact and versatile LCD projector designed to meet the needs of various applications, from educational settings to business presentations. Known for its portability and robust performance, it offers a range of features that cater to users who require reliability and quality.

One of the standout features of the PLC-XE34 is its brightness capability, producing an impressive output of 3000 ANSI lumens. This level of brightness ensures that presentations and videos maintain high visibility, even in well-lit environments. The projector's 1024 x 768 XGA resolution provides clarity and sharpness, making it suitable for detailed graphics and text. This resolution strikes a balance between performance and image quality, appealing to educators and professionals alike.

The PLC-XE34 also incorporates advanced LCD technology that enhances color performance and reduces the occurrence of artifacts. With a contrast ratio of 500:1, it produces vibrant colors and deep blacks, which is essential for engaging presentations. The projector's ability to handle a wide color spectrum ensures that images are both accurate and visually appealing.

In terms of connectivity, the projector is equipped with multiple input options, including HDMI, VGA, and composite video, allowing it to connect seamlessly to various devices such as laptops, DVD players, and tablets. The inclusion of a built-in URL function simplifies the process of displaying content from the internet, catering to modern presentations that often require web access.

Portability is another flagship characteristic of the Sanyo PLC-XE34. Weighing in at just a few kilograms, it is easy to transport between locations, making it ideal for mobile professionals and educators who need to set up quickly. The user-friendly interface and remote control functionality enhance the convenience of operation, allowing users to navigate menus and settings effortlessly.

Furthermore, the PLC-XE34 boasts a long lamp life, reaching up to 4000 hours in eco-mode. This longevity reduces maintenance costs and the frequency of replacements, providing users with a cost-effective solution over time. The projector’s efficient cooling system also contributes to its reliability during extended use.

In summary, the Sanyo PLC-XE34 is a powerful and flexible projector that integrates effective brightness, advanced LCD technology, and a range of connectivity options into a portable design. Its combination of high-performance features and user-friendly operation makes it a compelling choice for anyone in need of a dependable projection solution. Whether for classroom use, business meetings, or casual presentations, the PLC-XE34 stands out as a noteworthy option.