Sanyo PLC-XE34 owner manual Custom adj, Position H/V, Digital zoom +

Page 35

Computer Input

Custom adj..

Adjust the screen scale and position manually with this function.

Press the Point ►button at Custom adj. and the Custom adjustment menu is displayed on the screen, you can use the Point ▲▼ buttons to choose the item you want to adjust.

Scale H/V

Adjust the Horizontal/Vertical screen

 

scale.

H&V

When set to On, the aspect ratio is

 

fixed. The Scale V appears dimmed and

 

becomes unavailable. Adjust Scale H,

 

then the screen scale is automatically

Position H/V

modified based on the aspect ratio.

Adjust the Horizontal/Vertical screen

Common

position.

Save the adjusted scale or position to all

 

the inputs. Press the SELECT button at

 

Common to display a confirmation box.

 

To save the scale or position, press the

 

SELECT button at Yes. When Custom

 

is selected, the saved scale or position is

Reset

used.

Reset the all adjusted values. Press

 

the SELECT button at Reset to display

 

a confirmation box. To reset, press the

 

SELECT button at Yes.

For zooming in and out the images

Digital zoom +

Select Digital zoom +. The On-Screen Menu disappears and

D..zoom + appears. Press the SELECT button to expand the image size. Use the Point ▲▼◄► buttons to pan the image. The Panning function can work only when the image is larger than the screen size.

A projected image can be also expanded by pressing the D.ZOOM ▲ or the SELECT button on the remote control.

Digital zoom –

Select Digital zoom –. The On-Screen Menu disappears and

D..zoom – appears. Press the SELECT button to compress image size.

The projected image can be also compressed by pressing the D.ZOOM ▼ or the SELECT button on the remote control.

To exit the Digital zoom +/– mode, press any button except the D.ZOOM ▲▼ buttons, SELECT and Point buttons.

To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see page

27)again, or adjust the screen size with the D.ZOOM ▲▼ buttons.

adj.

►

✔Note:

•When no signal is detected, Normal is set automatically .

•The adjustable range for Scale H/V and Position H/V is limited depending on the input signal.

Remote Control

POINT buttons

SELECT button

D..ZOOM + button

D..ZOOM - button

✔Note:

• The minimum compression ratio is limited depending on the input signal, when the Keystone function is working or when the custom is selected for the screen size.

• True, Full, and Digital zoom +/– cannot be selected when 480i, 575i, 480p or 575p is selected in the PC System Menu (p.28).

• Digital zoom +/- cannot be selected when Full or True is selected.

• When Custom is selected, the Digital zoom - function is disabled.

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Network Supported Model PLC-XE34Features and Design Table of Contents To the Owner Safety PrecautionSafety Instructions Moving the Projector Safety Instructions Air CirculationInstalling the Projector in Proper Position Compliance AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom Bottom Part Names and FunctionsFront Back⑥ LAN Connection Terminal ⑦ Audio IN（Video Part Names and Functions Rear TerminalPart Names and Functions Top Control Part Names and Functions Remote Control Two AAA size batteries Remote Control Operating RangeRemote Control Code Positioning the Projector InstallationAdjustable Foot Cables used for connection Installation Connecting to a ComputerInstallation Connecting to Video Equipment Audio OUT For the U..S..A.. and Canada Installation Connecting the AC Power CordProjector side AC outlet side For Continental Europe For the U..KSelected Input Source and Lamp Control Input signal guidance windowBasic Operation Turning On the ProjectorPIN Code Input Dialog Box Basic OperationDirect OFF Function Basic Operation Turning Off the ProjectorOn-Screen Menu Basic Operation How to Operate the On-Screen MenuRemote Control Top Control① Input ④ Image adjust⑦ Setting Basic Operation Menu BarKeystone Correction Basic Operation Zoom and Focus AdjustmentAuto Setup Function Mute Basic Operation Sound AdjustmentVolume Volume Dialog BoxBasic Operation Remote Control Operation Screen button Timer buttonNo Show button Image buttonInput Menu Computer InputInput Source Selection RGB Computer 1/Computer Mode Computer Input Computer System SelectionPC System Menu AutoAuto PC adj Computer Input Auto PC AdjustmentPC adjust Menu To store adjustment parametersComputer Input Manual PC Adjustment Computer Input ResetMode free Mode freeImage select Menu Computer Input Image Mode SelectionImage Adjust Menu Computer Input Image AdjustmentScreen Menu Screen Size AdjustmentDigital zoom Custom adjPosition H/V Digital zoom +Input Menu Video InputInput Source Selection Video, S-video VideoRGB Scart ComponentSelect Video , S-video or Computer 1Component Video Input Video System SelectionVideo or S-video Component AV System Menu ComponentDynamic Standard Cinema Blackboard Green Colorboard Image Video Input Image Mode SelectionCinema Image buttonTint Video Input Image AdjustmentColor Noise reduction Off Disabled Lower reduction Higher reduction ProgressiveVideo Input Store MenuVideo Input Screen Size Adjustment Language SettingSetting Setting Menu LanguageAuto Keystone Auto setupAuto setup Input searchDisplay Power off? p.20Keystone BackgroundLogo select Logo Logo and Logo PIN code lock settingsDefault Logo selectLogo PIN code lock CaptureLogo PIN code lock CaptureChange the Logo PIN code Change the Logo PIN code lock settingEnter a Logo PIN code Computer CeilingRear TerminalDirect on Power managementShut down Timer Standby modeClosed Caption Lamp control Lamp control Remote controlRemote control To change the code for the remote controlPIN code lock Key lock PIN code lockSecurity Key lock and PIN code lock Key lockEnter a PIN code Change the PIN code Change the PIN code lock settingFan control Lamp counter resetVideo delay control FanFilter counter Factory defaultFactory default Filter counterInput Source Information Display InformationThen check the matters below Maintenance and CleaningProjector is shut down and the Warning indicator lights red Filter counter Maintenance and Cleaning Cleaning the FiltersResetting the Filter Counter Cleaning the Projector Cabinet Maintenance and Cleaning Attaching the Lens CapCleaning the Projection Lens Lamp Replace indicator Maintenance and Cleaning Lamp ReplacementReset the lamp replacement counter Lamp replacement iconService Parts No 349 Maintenance and CleaningAppendix TroubleshootingAppendix PIN code dialog box appears Remote Control doesIndicator blinks or lights Image is distorted or runs offAppendix Appendix Menu Tree Information System AutoSettingImage select Image Adjust Screen Indicators Appendix Indicators and Projector ConditionON-SCREEN Resolution Appendix Compatible Computer SpecificationsAppendix Technical Specifications Optional Parts Appendix PJ Link Notice Terminal Analog RGB Mini D-sub 15 pin Appendix Configurations of TerminalsControl Port Connector D-sub 9 pin Logo PIN Code Lock No Appendix PIN Code Number MemoPIN Code Lock No Dimensions Appendix KJ2AC

PLC-XE34 specifications

The Sanyo PLC-XE34 is a compact and versatile LCD projector designed to meet the needs of various applications, from educational settings to business presentations. Known for its portability and robust performance, it offers a range of features that cater to users who require reliability and quality.

One of the standout features of the PLC-XE34 is its brightness capability, producing an impressive output of 3000 ANSI lumens. This level of brightness ensures that presentations and videos maintain high visibility, even in well-lit environments. The projector's 1024 x 768 XGA resolution provides clarity and sharpness, making it suitable for detailed graphics and text. This resolution strikes a balance between performance and image quality, appealing to educators and professionals alike.

The PLC-XE34 also incorporates advanced LCD technology that enhances color performance and reduces the occurrence of artifacts. With a contrast ratio of 500:1, it produces vibrant colors and deep blacks, which is essential for engaging presentations. The projector's ability to handle a wide color spectrum ensures that images are both accurate and visually appealing.

In terms of connectivity, the projector is equipped with multiple input options, including HDMI, VGA, and composite video, allowing it to connect seamlessly to various devices such as laptops, DVD players, and tablets. The inclusion of a built-in URL function simplifies the process of displaying content from the internet, catering to modern presentations that often require web access.

Portability is another flagship characteristic of the Sanyo PLC-XE34. Weighing in at just a few kilograms, it is easy to transport between locations, making it ideal for mobile professionals and educators who need to set up quickly. The user-friendly interface and remote control functionality enhance the convenience of operation, allowing users to navigate menus and settings effortlessly.

Furthermore, the PLC-XE34 boasts a long lamp life, reaching up to 4000 hours in eco-mode. This longevity reduces maintenance costs and the frequency of replacements, providing users with a cost-effective solution over time. The projector’s efficient cooling system also contributes to its reliability during extended use.

In summary, the Sanyo PLC-XE34 is a powerful and flexible projector that integrates effective brightness, advanced LCD technology, and a range of connectivity options into a portable design. Its combination of high-performance features and user-friendly operation makes it a compelling choice for anyone in need of a dependable projection solution. Whether for classroom use, business meetings, or casual presentations, the PLC-XE34 stands out as a noteworthy option.
Top Page Image Contents