Sanyo PLC-XE34 owner manual Computer Input Computer System Selection, PC System Menu, Auto, Mode

Page 28

Computer Input

Computer System Selection

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on page 71.)

One of the following messages may appear when:

 

When the projector cannot recognize the

Auto

 

connected signal conforming to the provided

 

 

PC systems, Auto is displayed on the System

 

Menu box and the Auto PC Adjustment function

 

works to display proper images. If the image is

 

not projected properly, a manual adjustment is

 

required (pp.30-31).

-----There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on p.64.)

 

The preset system is manually adjusted in the

Mode 1

 

PC adjust Menu. The adjusted data can be

 

 

stored in Mode 1–10(pp.30-31).

 

PC Systems provided in this projector is chosen.

SVGA 1

 

The projector chooses a proper system provided

 

 

in the projector and displays it.

*Mode 1 and SVGA 1 are examples.

PC System Menu

Computer 1

RGB

 

Computer 2

RGB

 

Video

 

System

XGA 1

The PC System Menu Selected system is displayed.

Selecting Computer System Manually

PC system can also be selected manually.

PC System Menu

1

Press the MENU button to display the On-Screen

Menu. Use the Point ▲▼ buttons to select Input and

 

then press the Point or the SELECT button.

2

Use the Point ▲▼ buttons to select System and then

 

press the Point or the SELECT button.

3

Use the Point ▲▼ buttons to select the desired system

and then press the SELECT button.

Customized Mode (1–10)set in the PC adjust Menu (pp.30-31).

Systems in this dialog box can be selected.

28

Image 28
Contents Model PLC-XE34 Network SupportedFeatures and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Installing the Projector in Proper Position Safety Instructions Air CirculationMoving the Projector AC Power Cord for the United Kingdom AC Power Cord for the United States and CanadaCompliance Part Names and Functions FrontBack BottomPart Names and Functions Rear Terminal ⑥ LAN Connection Terminal ⑦ Audio IN(VideoPart Names and Functions Top Control Part Names and Functions Remote Control Remote Control Code Remote Control Operating RangeTwo AAA size batteries Adjustable Foot InstallationPositioning the Projector Installation Connecting to a Computer Cables used for connectionInstallation Connecting to Video Equipment Audio OUT Installation Connecting the AC Power Cord Projector side AC outlet sideFor Continental Europe For the U..K For the U..S..A.. and CanadaInput signal guidance window Basic OperationTurning On the Projector Selected Input Source and Lamp ControlBasic Operation PIN Code Input Dialog BoxBasic Operation Turning Off the Projector Direct OFF FunctionBasic Operation How to Operate the On-Screen Menu Remote ControlTop Control On-Screen Menu④ Image adjust ⑦ SettingBasic Operation Menu Bar ① InputAuto Setup Function Basic Operation Zoom and Focus AdjustmentKeystone Correction Basic Operation Sound Adjustment VolumeVolume Dialog Box MuteBasic Operation Remote Control Operation Timer button No Show buttonImage button Screen buttonInput Source Selection RGB Computer 1/Computer Computer InputInput Menu Computer Input Computer System Selection PC System MenuAuto ModeComputer Input Auto PC Adjustment PC adjust MenuTo store adjustment parameters Auto PC adjComputer Input Manual PC Adjustment Reset Mode freeMode free Computer InputComputer Input Image Mode Selection Image select MenuComputer Input Image Adjustment Image Adjust MenuScreen Size Adjustment Screen MenuCustom adj Position H/VDigital zoom + Digital zoomVideo Input Input Source Selection Video, S-videoVideo Input MenuComponent RGB ScartVideo Input Video System Selection Video or S-videoComponent AV System Menu Component Select Video , S-video or Computer 1ComponentVideo Input Image Mode Selection CinemaImage button Dynamic Standard Cinema Blackboard Green Colorboard ImageColor Video Input Image AdjustmentTint Off Disabled Lower reduction Higher reduction Progressive Video InputStore Menu Noise reductionVideo Input Screen Size Adjustment Setting SettingSetting Menu Language LanguageAuto setup Auto setupInput search Auto KeystonePower off? p.20 KeystoneBackground DisplayLogo Logo and Logo PIN code lock settings DefaultLogo select Logo selectCapture Logo PIN code lockCapture Logo PIN code lockEnter a Logo PIN code Change the Logo PIN code lock settingChange the Logo PIN code Ceiling RearTerminal ComputerShut down Power managementDirect on Standby mode TimerClosed Caption Lamp control Remote control Remote controlTo change the code for the remote control Lamp controlKey lock PIN code lock Security Key lock and PIN code lockKey lock PIN code lockChange the PIN code lock setting Enter a PIN code Change the PIN codeLamp counter reset Video delay controlFan Fan controlFactory default Factory defaultFilter counter Filter counterInformation Input Source Information DisplayProjector is shut down and the Warning indicator lights red Maintenance and CleaningThen check the matters below Resetting the Filter Counter Maintenance and Cleaning Cleaning the FiltersFilter counter Cleaning the Projection Lens Maintenance and Cleaning Attaching the Lens CapCleaning the Projector Cabinet Maintenance and Cleaning Lamp Replacement Reset the lamp replacement counterLamp replacement icon Lamp Replace indicatorMaintenance and Cleaning Service Parts No 349Troubleshooting AppendixAppendix Remote Control does Indicator blinks or lightsImage is distorted or runs off PIN code dialog box appearsAppendix Appendix Menu Tree Image select Image Adjust Screen System AutoSettingInformation Appendix Indicators and Projector Condition IndicatorsAppendix Compatible Computer Specifications ON-SCREEN ResolutionAppendix Technical Specifications Optional Parts Appendix PJ Link Notice Control Port Connector D-sub 9 pin Appendix Configurations of TerminalsTerminal Analog RGB Mini D-sub 15 pin PIN Code Lock No Appendix PIN Code Number MemoLogo PIN Code Lock No Dimensions Appendix KJ2AC

PLC-XE34 specifications

The Sanyo PLC-XE34 is a compact and versatile LCD projector designed to meet the needs of various applications, from educational settings to business presentations. Known for its portability and robust performance, it offers a range of features that cater to users who require reliability and quality.

One of the standout features of the PLC-XE34 is its brightness capability, producing an impressive output of 3000 ANSI lumens. This level of brightness ensures that presentations and videos maintain high visibility, even in well-lit environments. The projector's 1024 x 768 XGA resolution provides clarity and sharpness, making it suitable for detailed graphics and text. This resolution strikes a balance between performance and image quality, appealing to educators and professionals alike.

The PLC-XE34 also incorporates advanced LCD technology that enhances color performance and reduces the occurrence of artifacts. With a contrast ratio of 500:1, it produces vibrant colors and deep blacks, which is essential for engaging presentations. The projector's ability to handle a wide color spectrum ensures that images are both accurate and visually appealing.

In terms of connectivity, the projector is equipped with multiple input options, including HDMI, VGA, and composite video, allowing it to connect seamlessly to various devices such as laptops, DVD players, and tablets. The inclusion of a built-in URL function simplifies the process of displaying content from the internet, catering to modern presentations that often require web access.

Portability is another flagship characteristic of the Sanyo PLC-XE34. Weighing in at just a few kilograms, it is easy to transport between locations, making it ideal for mobile professionals and educators who need to set up quickly. The user-friendly interface and remote control functionality enhance the convenience of operation, allowing users to navigate menus and settings effortlessly.

Furthermore, the PLC-XE34 boasts a long lamp life, reaching up to 4000 hours in eco-mode. This longevity reduces maintenance costs and the frequency of replacements, providing users with a cost-effective solution over time. The projector’s efficient cooling system also contributes to its reliability during extended use.

In summary, the Sanyo PLC-XE34 is a powerful and flexible projector that integrates effective brightness, advanced LCD technology, and a range of connectivity options into a portable design. Its combination of high-performance features and user-friendly operation makes it a compelling choice for anyone in need of a dependable projection solution. Whether for classroom use, business meetings, or casual presentations, the PLC-XE34 stands out as a noteworthy option.