Sanyo PLC-XE34 owner manual Fan control, Lamp counter reset, Video delay control

Page 56

Setting

Fan

This function provides the following options in the cooling fans’ operation when the projector is turned off (p.20).

L1 ...... Normal operation

L ...... Slower and lower-sound than the normal operation

(L1), but it takes more time to cool the projector down.

Fan control

 

Choose the running speed of cooling fans from the following

 

options according to the ground elevation under which you

 

use the projector.

 

Off................ Normal speed. Set this function to Off when

 

using the projector in non-high altitude

 

environment.

 

On1............. Faster than Off mode. Select this mode

 

when using the projector in high altitudes

 

(about 1,000 meters to 2,000 meters above

 

the sea level) where the fans have less

 

cooling effect.

 

On............. Faster than On1 mode. Select this mode

 

when using the projector in higher altitudes

 

(about 2,000 meters to 3,000 meters

 

above the sea level) where the fans have

 

lesser cooling effect.

Lamp counter reset

Note:

 

The fan noise becomes louder in On1 and On2.

 

Video delay control

When you want to make a digital processing of a projected image faster, set this function.

Use the Point ▲▼ buttons�� select an item o� Off or On.

Note:

Noise reduction and Progressive can not be selected when Video delay control is set to On.

Lamp counter

Be sure to reset the Lamp replacement counter after the lamp is replaced. (p. 62)

Press the Point ▲▼ buttons to choose the Lamp counter function and then press the Point ► or the SELECT button to access the submenu items.

Lamp counter................This item shows the total

accumulated time of the lamp usage.

Lamp counter reset.......Press the SELECT button to

choose Lamp counter reset . Select yes in the confirmation box if you want to reset the lamp counter, and then choose yes in the second confirmation box to reset lamp counter.

56

Image 56
Contents Model PLC-XE34 Network SupportedFeatures and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Moving the Projector Safety Instructions Air CirculationInstalling the Projector in Proper Position Compliance AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom Part Names and Functions FrontBack BottomPart Names and Functions Rear Terminal ⑥ LAN Connection Terminal ⑦ Audio IN(VideoPart Names and Functions Top Control Part Names and Functions Remote Control Two AAA size batteries Remote Control Operating RangeRemote Control Code Positioning the Projector InstallationAdjustable Foot Installation Connecting to a Computer Cables used for connectionInstallation Connecting to Video Equipment Audio OUT Installation Connecting the AC Power Cord Projector side AC outlet sideFor Continental Europe For the U..K For the U..S..A.. and CanadaInput signal guidance window Basic OperationTurning On the Projector Selected Input Source and Lamp ControlBasic Operation PIN Code Input Dialog BoxBasic Operation Turning Off the Projector Direct OFF FunctionBasic Operation How to Operate the On-Screen Menu Remote ControlTop Control On-Screen Menu④ Image adjust ⑦ SettingBasic Operation Menu Bar ① InputKeystone Correction Basic Operation Zoom and Focus AdjustmentAuto Setup Function Basic Operation Sound Adjustment VolumeVolume Dialog Box MuteBasic Operation Remote Control Operation Timer button No Show buttonImage button Screen buttonInput Menu Computer InputInput Source Selection RGB Computer 1/Computer Computer Input Computer System Selection PC System MenuAuto ModeComputer Input Auto PC Adjustment PC adjust MenuTo store adjustment parameters Auto PC adjComputer Input Manual PC Adjustment Reset Mode freeMode free Computer InputComputer Input Image Mode Selection Image select MenuComputer Input Image Adjustment Image Adjust MenuScreen Size Adjustment Screen MenuCustom adj Position H/VDigital zoom + Digital zoomVideo Input Input Source Selection Video, S-videoVideo Input MenuComponent RGB ScartVideo Input Video System Selection Video or S-videoComponent AV System Menu Component Select Video , S-video or Computer 1ComponentVideo Input Image Mode Selection CinemaImage button Dynamic Standard Cinema Blackboard Green Colorboard ImageTint Video Input Image AdjustmentColor Off Disabled Lower reduction Higher reduction Progressive Video InputStore Menu Noise reductionVideo Input Screen Size Adjustment Setting SettingSetting Menu Language LanguageAuto setup Auto setupInput search Auto KeystonePower off? p.20 KeystoneBackground DisplayLogo Logo and Logo PIN code lock settings DefaultLogo select Logo selectCapture Logo PIN code lockCapture Logo PIN code lockChange the Logo PIN code Change the Logo PIN code lock settingEnter a Logo PIN code Ceiling RearTerminal ComputerDirect on Power managementShut down Standby mode TimerClosed Caption Lamp control Remote control Remote controlTo change the code for the remote control Lamp controlKey lock PIN code lock Security Key lock and PIN code lockKey lock PIN code lockChange the PIN code lock setting Enter a PIN code Change the PIN codeLamp counter reset Video delay controlFan Fan controlFactory default Factory defaultFilter counter Filter counterInformation Input Source Information DisplayThen check the matters below Maintenance and CleaningProjector is shut down and the Warning indicator lights red Filter counter Maintenance and Cleaning Cleaning the FiltersResetting the Filter Counter Cleaning the Projector Cabinet Maintenance and Cleaning Attaching the Lens CapCleaning the Projection Lens Maintenance and Cleaning Lamp Replacement Reset the lamp replacement counterLamp replacement icon Lamp Replace indicatorMaintenance and Cleaning Service Parts No 349Troubleshooting AppendixAppendix Remote Control does Indicator blinks or lightsImage is distorted or runs off PIN code dialog box appearsAppendix Appendix Menu Tree Information System AutoSettingImage select Image Adjust Screen Appendix Indicators and Projector Condition IndicatorsAppendix Compatible Computer Specifications ON-SCREEN ResolutionAppendix Technical Specifications Optional Parts Appendix PJ Link Notice Terminal Analog RGB Mini D-sub 15 pin Appendix Configurations of TerminalsControl Port Connector D-sub 9 pin Logo PIN Code Lock No Appendix PIN Code Number MemoPIN Code Lock No Dimensions Appendix KJ2AC

PLC-XE34 specifications

The Sanyo PLC-XE34 is a compact and versatile LCD projector designed to meet the needs of various applications, from educational settings to business presentations. Known for its portability and robust performance, it offers a range of features that cater to users who require reliability and quality.

One of the standout features of the PLC-XE34 is its brightness capability, producing an impressive output of 3000 ANSI lumens. This level of brightness ensures that presentations and videos maintain high visibility, even in well-lit environments. The projector's 1024 x 768 XGA resolution provides clarity and sharpness, making it suitable for detailed graphics and text. This resolution strikes a balance between performance and image quality, appealing to educators and professionals alike.

The PLC-XE34 also incorporates advanced LCD technology that enhances color performance and reduces the occurrence of artifacts. With a contrast ratio of 500:1, it produces vibrant colors and deep blacks, which is essential for engaging presentations. The projector's ability to handle a wide color spectrum ensures that images are both accurate and visually appealing.

In terms of connectivity, the projector is equipped with multiple input options, including HDMI, VGA, and composite video, allowing it to connect seamlessly to various devices such as laptops, DVD players, and tablets. The inclusion of a built-in URL function simplifies the process of displaying content from the internet, catering to modern presentations that often require web access.

Portability is another flagship characteristic of the Sanyo PLC-XE34. Weighing in at just a few kilograms, it is easy to transport between locations, making it ideal for mobile professionals and educators who need to set up quickly. The user-friendly interface and remote control functionality enhance the convenience of operation, allowing users to navigate menus and settings effortlessly.

Furthermore, the PLC-XE34 boasts a long lamp life, reaching up to 4000 hours in eco-mode. This longevity reduces maintenance costs and the frequency of replacements, providing users with a cost-effective solution over time. The projector’s efficient cooling system also contributes to its reliability during extended use.

In summary, the Sanyo PLC-XE34 is a powerful and flexible projector that integrates effective brightness, advanced LCD technology, and a range of connectivity options into a portable design. Its combination of high-performance features and user-friendly operation makes it a compelling choice for anyone in need of a dependable projection solution. Whether for classroom use, business meetings, or casual presentations, the PLC-XE34 stands out as a noteworthy option.