Computer Input
Computer System Selection
The projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, or UXGA with its
One of the following messages may appear when:
Auto | The projector cannot recognize the connected | PC System Menu |
| signal conforming to the provided PC Systems. |
|
|
| |
| “Auto” is displayed on the PC System Menu |
|
| icon and the Auto PC Adjustment function works |
|
| to display proper images. If images are not |
|
| projected properly, adjust manually. |
|
-----There is no signal input from computer. Check the connection between your computer and the projector. (See “Troubleshooting” on page 64.)
The Auto PC Adjustment function operates to adjust the projector.
Mode 1 | The preset system is manually adjusted in the |
| PC Adjust Menu. The adjusted data can be |
| |
| stored in Mode |
| A PC System provided in the projector is |
SVGA 1 | |
| selected. The projector selects a proper system |
| |
| provided in the projector and displays it. |
*Mode 1 and SVGA 1 are examples.
Selecting Computer System Manually
PC system can also be selected manually.
1 | Press the MENU button to display the |
| Menu. Use the Point 7 8 buttons to move the red |
| frame pointer to the PC System Menu icon. |
2 | Use the Point ed buttons to move the red arrow |
| pointer to the desired system, and then press the |
SELECT button.
PC System Menu
The PC System Menu icon The selected system is displayed.
Available system selection.
Custom Mode
PC Adjust Menu
28