Sanyo PLC-XL50 owner manual Antitheft Alarm Function, Other settings

Page 56

Antitheft Alarm Function

Other settings

Change the PIN code

1

Press the F button and enter the four-digit PIN code

 

number within about 10 seconds. The ALARM indicator

 

blinks red for a few seconds and a high-pitched

 

confirmation sound is produced.

2

While the indicator is blinking, enter a new PIN code,

 

then you will hear a high-pitched confirmation sound

and the ALARM indicator is turned off.

When you enter an incorrect PIN code, you will hear a low-pitched sound. If you enter incorrect PIN code three times in a row, the alarm will start ringing.

The PIN code for the Antitheft alarm function is a combination of 1, 2, or 3. Use the buttons 1, 2, and 3 to enter the PIN code. The default PIN code is “1111.”

Reset the settings

Select “Factory default” in the Setting menu to reset the settings for the Antitheft alarm function.

Note:

This is effective only when the Antitheft alarm setting is released.

Alarm operating configuration

The Alarm operating configuration can be changed when the Antitheft alarm function is set to “Off.” See page 55 for setting or releasing this function.

Press the SELECT button at Alarm icon in the Setting Menu to display the Alarm setting dialog box. Use the Point ed buttons to select the desired option; use the Point 7 8 buttons to set the selected option.

Battery charge

See the next page for details.

Alarm volume

Small, Medium, Large (default)

Sensitivity

 

Low

Less sensitive

Medium

Normal sensitivity

High

Highly sensitive (default)

Ringing time

 

10 seconds

Rings about 10 seconds (default).

60 seconds

Rings about 60 seconds.

Long time

Rings until the end of the battery life.

caution:

when you have changed THE PIn code, write down the new pin code in column of the pin code no.memo on page 74, and keep it securely. If you forget your PIN code, some settings of THE ANTITHEFT ALARM function can no longer be changed.

Indicator

ALARM indicator

Terminal

F button Button 1, 2, 3

Alarm

Press the SELECT button at the Alarm icon to display the Alarm setting dialog box.

Use the Point 7 8 buttons to set the selected option.

Note:

•The Alarm icon appears dimmed and can be unavailable when the Antitheft alarm function is set to “On” or if the battery is not installed, discharged, or coming to the end of its life.

•While the Alarm icon is selected, the Antitheft alarm setting buttons can be unavailable.

•When selecting “Long time” option in the Ringing time, the duration of alarm sounding differs depending on the battery life.

56

Image 56
Contents Model PLC-XL50 Features and Design Large Screen in Limited SpaceTable of Contents Safety Precaution To the OwnerSafety Instructions Safety Instructions Air Circulation Moving the ProjectorSide a Side B Side C Side D Side ECompliance Federal Communications Commission NoticeTop controls and Indicators e Exhaust Vent Part Names and FunctionsFront Back BottomPart Names and Functions Rear Terminal Part Names and Functions Top Part Names and Functions Remote Control Part Names and Functions Remote Control Battery Installation Operating RangePositioning the Projector InstallationAdjustable Feet Stand Installation Mounting the Rear Leg and the StandRear Leg Installation Connecting to Computer Cables used for connectionInstallation Connecting to Video Equipment Video, S-Video Computer Component Audio Installation Connecting the AC Power Cord Projector side AC outlet sideWhat is PIN code? Basic OperationTurning On the Projector Enter a PIN codeBasic Operation Turning Off the Projector Basic Operation How to Operate the On-Screen Menu Remote Control Select button On-Screen MenuTop Control Menu button Point buttonsFor video source Basic Operation Menu BarFor computer source Basic Operation Zoom Adjustment Screen Position AdjustmentFocus Adjustment Remote ControlBasic Operation Sound Adjustment Remote Control OperationCOMPUTER/VIDEO button Freeze buttonBasic Operation Computer Input Input Source SelectionInput Menu Source Select MenuComputer Input Computer System Selection AutoPC System Menu ModeComputer Input Auto PC Adjustment Direct Operation Remote ControlTo store the adjusted parameters PC Adjust MenuComputer Input Manual PC Adjustment Computer Input Computer Input Image Level Selection BlackboardGreen Image Select MenuComputer Input Image Level Adjustment Screen Size Adjustment Digital zoom For zooming in and out the imagesDigital zoom + Auto Video Component Video InputInput Source Selection Video, S-Video, Component Video Input Input Source Selection RGB Scart 21-pin RGB ScartVideo Input Video System Selection Video or S-Video AutoComponent Auto AV System Menu Video or S-VideoVideo Input Image Level Selection CinemaVideo Input Image1-4Tint Video Input Image Level AdjustmentColor Noise reduction ProgressiveVideo Input Screen Size Adjustment Setting SettingLanguage Setting Menu Language ZoomDisplay Uniformity adjBlue back Logo Logo and Logo PIN code lock settings Logo selectCapture Logo select CaptureLogo PIN code lock Enter a Logo PIN codeChange the Logo PIN code Ceiling RearTerminal Input searchLamp control Power managementOn start Security Key lock, PIN code lock, Alarm settings Remote control Key lockTo change the code for the projector Key lockPIN code lock Enter a PIN codeChange the PIN code lock setting Change the PIN code lock settingChange the PIN code Change the PIN codeFactory default Lamp Replacement iconFan Lamp counterAntitheft Alarm Function How to Use the Antitheft Alarm FunctionSet and release the Antitheft alarm function IndicatorAntitheft Alarm Function Other settingsReplace the rechargeable batteries How to replace the rechargeable batteriesCharge the built-in batteries SAFETY Precautions for Sanyo Ni-MH Battery Pack Then check the matters below Maintenance and CleaningIndicators Page Maintenance and Cleaning Cleaning the Projection Window Cleaning the Projector CabinetService Parts No 337 Maintenance and Cleaning Lamp ReplacementReset the lamp counter Lamp Handling Precautions Maintenance and Cleaning Lamp Replacement CounterTroubleshooting AppendixAppendix Image is out of focusRemote Control does not work Appears on the screenAppendix Menu Tree SoundComputer Input/Video Input Computer InputSetting Progressive Reset Store Quit Normal WideAppendix Indicators and Projector Condition Projector ConditionAppendix Compatible Computer Specifications ON-SCREEN ResolutionTechnical Specifications Accessories Optional PartsAppendix Configurations of Terminals DimensionsService Port Connector Terminal Mini DIN 8-PIN Terminal Analog RGB Mini D-sub 15 pinLamp Replacement Label Appendix PIN Code Number MemoKM3A
Related manuals
Manual 75 pages 32.24 Kb

PLC-XL50 specifications

The Sanyo PLC-XL50 is a well-respected model in the realm of projectors, known particularly for its unique features and superior performance tailored for both professional and personal use. It embodies a blend of advanced technologies that make it an appealing choice for a variety of applications, including business presentations and educational settings.

One of the standout characteristics of the PLC-XL50 is its impressive brightness output, which is rated at 3000 ANSI lumens. This high brightness level ensures that images remain clear and visible even in well-lit environments, making it an optimal choice for conference rooms and classrooms. The projector utilizes a 3LCD technology, which means it is capable of delivering vibrant colors and excellent image quality while maintaining a high level of brightness. This technology reduces the chances of color separation artifacts that can sometimes occur with single-chip DLP projectors.

Additionally, the PLC-XL50 boasts a native resolution of XGA (1024 x 768 pixels), providing crisp images for presentations and video playback. Coupled with a contrast ratio of 500:1, users can expect deeper blacks and brighter whites, enhancing the overall viewing experience. The projector supports a wide range of input options, including VGA, composite video, and S-video, thus ensuring compatibility with various devices from laptops to DVD players.

The unit is also designed with convenience in mind. It features a compact form factor, making it easy to transport between locations, and it is lightweight enough for portability. The adjustable zoom and focus capabilities allow for flexible setup arrangements, enabling users to project larger images from shorter distances. This versatility is further enhanced by its keystone correction feature, which helps to maintain a square image, eliminating distortion when projecting from an angle.

Another notable attribute is its energy-efficient design. The PLC-XL50 is equipped with a long-lasting lamp life, which significantly reduces the frequency of bulb replacements and lowers overall operating costs. Furthermore, it includes a quiet fan operation, making it suitable for environments where noise is a concern.

In summary, the Sanyo PLC-XL50 is a robust projector that effectively combines high brightness, excellent color accuracy, and flexible connectivity options. Its advanced features make it a reliable choice for anyone in need of a projector that performs consistently across various settings.