Sanyo PLC-XL50 owner manual How to Use the Antitheft Alarm Function, Indicator

Page 55

Antitheft Alarm Function

How to Use the Antitheft Alarm Function

Antitheft alarm function is provided to prevent the projector from being stolen. When this function is set to “On,” the alarm rings as an unauthorized person tries to move the projector.

To activate the Alarm function for the first time after purchase, you must turn on the power once.

✔Note:

•This function is not a guarantee against stealing.

•The alarm does not ring while the AC power cord is connected to an outlet even if the projector detects vibrations.

•The alarm will stop, as the AC power cord is connected to an outlet, except when the battery cover is open. •Pressing the buttons is always accompanied by a sound. If no sound is produced after pressing a button, you need to press it again.

The Alarm function is operated by a built-in rechargeable battery. The alarm will not work properly if the battery is not charged enough. See page 57 for details.

Set and release the Antitheft alarm function

The Alarm setting and release and PIN Code change can be made without an AC power connection.

Set the alarm

Indicator

Press the F button three times to turn the alarm function on. The ALARM indicator blinks for a few seconds and the projector enters the warning mode. (If the battery is not charged enough for the alarm function to operate normally, it bleeps and the Alarm indicator will blink red every 20 seconds.)

During the Antitheft alarm function is on, the projector emits a low-pitched sound when it detects vibration.

When the projector does not detect vibration for a few seconds after the sound, it goes back to the warning mode. When the projector detects more vibrations after the low- pitched sound, the alarm starts ringing.

The Alarm operating configuration (Battery charge, Alarm volume, Sensitivity, and Ringing time) can be selected in the menu. See page 56.

✔Note:

•You can test the alarm sound without setting the alarm function. Press and hold the F button, then the alarm starts ringing. The duration of the alarm sound is the same as the “Ringing Time” setting (p.56).

•If you want to stop the alarm while it is ringing, insert the AC power cord to an outlet or press the F button and enter the four-digit PIN code number.

ALARM indicator

Terminal

F button Button 1, 2, 3

Release the alarm setting

Press the F button and enter the four-digit PIN code number within about 10 seconds. (The default PIN code is set to “1111.”) When the alarm is released, you will hear a high- pitched confirmation sound.

When you enter an incorrect PIN code, you will hear a low- pitched sound. If you enter an incorrect PIN code three times in a row, the alarm will start ringing.

55

Page 54 Page 56
Image 55
Page 54 Page 56
Contents Model PLC-XL50 Large Screen in Limited Space Features and DesignTable of Contents To the Owner Safety PrecautionSafety Instructions Moving the Projector Safety Instructions Air CirculationSide C Side D Side E Side a Side BFederal Communications Commission Notice ComplianceBottom Top controls and Indicators e Exhaust VentPart Names and Functions Front BackPart Names and Functions Rear Terminal Part Names and Functions Top Part Names and Functions Remote Control Operating Range Part Names and Functions Remote Control Battery InstallationAdjustable Feet InstallationPositioning the Projector Rear Leg Installation Mounting the Rear Leg and the StandStand Cables used for connection Installation Connecting to ComputerInstallation Connecting to Video Equipment Video, S-Video Computer Component Audio Projector side AC outlet side Installation Connecting the AC Power CordEnter a PIN code What is PIN code?Basic Operation Turning On the ProjectorBasic Operation Turning Off the Projector Menu button Point buttons Basic Operation How to Operate the On-Screen MenuRemote Control Select button On-Screen Menu Top ControlFor computer source Basic Operation Menu BarFor video source Remote Control Basic Operation Zoom AdjustmentScreen Position Adjustment Focus AdjustmentFreeze button Basic Operation Sound AdjustmentRemote Control Operation COMPUTER/VIDEO buttonBasic Operation Source Select Menu Computer InputInput Source Selection Input MenuMode Computer Input Computer System SelectionAuto PC System MenuPC Adjust Menu Computer Input Auto PC AdjustmentDirect Operation Remote Control To store the adjusted parametersComputer Input Manual PC Adjustment Computer Input Computer Input Image Level Selection Image Select Menu BlackboardGreenComputer Input Image Level Adjustment Screen Size Adjustment Digital zoom + For zooming in and out the imagesDigital zoom Input Source Selection Video, S-Video, Component Video InputAuto Video Component RGB Scart Video Input Input Source Selection RGB Scart 21-pinAV System Menu Video or S-Video Video Input Video System SelectionVideo or S-Video Auto Component AutoCinema Video Input Image Level SelectionImage1-4 Video InputColor Video Input Image Level AdjustmentTint Progressive Noise reductionVideo Input Screen Size Adjustment Zoom SettingSetting Language Setting Menu LanguageBlue back Uniformity adjDisplay Logo select Capture Logo Logo and Logo PIN code lock settingsLogo select CaptureChange the Logo PIN code Enter a Logo PIN codeLogo PIN code lock Input search CeilingRear TerminalOn start Power managementLamp control Key lock Security Key lock, PIN code lock, Alarm settingsRemote control Key lock To change the code for the projectorEnter a PIN code PIN code lockChange the PIN code Change the PIN code lock settingChange the PIN code lock setting Change the PIN codeLamp counter Factory defaultLamp Replacement icon FanIndicator Antitheft Alarm FunctionHow to Use the Antitheft Alarm Function Set and release the Antitheft alarm functionOther settings Antitheft Alarm FunctionCharge the built-in batteries How to replace the rechargeable batteriesReplace the rechargeable batteries SAFETY Precautions for Sanyo Ni-MH Battery Pack Indicators Maintenance and CleaningThen check the matters below Page Cleaning the Projector Cabinet Maintenance and Cleaning Cleaning the Projection WindowReset the lamp counter Maintenance and Cleaning Lamp ReplacementService Parts No 337 Maintenance and Cleaning Lamp Replacement Counter Lamp Handling PrecautionsAppendix TroubleshootingImage is out of focus AppendixAppears on the screen Remote Control does not workComputer Input Appendix Menu TreeSound Computer Input/Video InputProgressive Reset Store Quit Normal Wide SettingProjector Condition Appendix Indicators and Projector ConditionON-SCREEN Resolution Appendix Compatible Computer SpecificationsTechnical Specifications Optional Parts AccessoriesTerminal Analog RGB Mini D-sub 15 pin Appendix Configurations of TerminalsDimensions Service Port Connector Terminal Mini DIN 8-PINAppendix PIN Code Number Memo Lamp Replacement LabelKM3A
Related manuals
Manual 75 pages 32.24 Kb

PLC-XL50 specifications

The Sanyo PLC-XL50 is a well-respected model in the realm of projectors, known particularly for its unique features and superior performance tailored for both professional and personal use. It embodies a blend of advanced technologies that make it an appealing choice for a variety of applications, including business presentations and educational settings.

One of the standout characteristics of the PLC-XL50 is its impressive brightness output, which is rated at 3000 ANSI lumens. This high brightness level ensures that images remain clear and visible even in well-lit environments, making it an optimal choice for conference rooms and classrooms. The projector utilizes a 3LCD technology, which means it is capable of delivering vibrant colors and excellent image quality while maintaining a high level of brightness. This technology reduces the chances of color separation artifacts that can sometimes occur with single-chip DLP projectors.

Additionally, the PLC-XL50 boasts a native resolution of XGA (1024 x 768 pixels), providing crisp images for presentations and video playback. Coupled with a contrast ratio of 500:1, users can expect deeper blacks and brighter whites, enhancing the overall viewing experience. The projector supports a wide range of input options, including VGA, composite video, and S-video, thus ensuring compatibility with various devices from laptops to DVD players.

The unit is also designed with convenience in mind. It features a compact form factor, making it easy to transport between locations, and it is lightweight enough for portability. The adjustable zoom and focus capabilities allow for flexible setup arrangements, enabling users to project larger images from shorter distances. This versatility is further enhanced by its keystone correction feature, which helps to maintain a square image, eliminating distortion when projecting from an angle.

Another notable attribute is its energy-efficient design. The PLC-XL50 is equipped with a long-lasting lamp life, which significantly reduces the frequency of bulb replacements and lowers overall operating costs. Furthermore, it includes a quiet fan operation, making it suitable for environments where noise is a concern.

In summary, the Sanyo PLC-XL50 is a robust projector that effectively combines high brightness, excellent color accuracy, and flexible connectivity options. Its advanced features make it a reliable choice for anyone in need of a projector that performs consistently across various settings.
Top Page Image Contents