Computer Input
Custom
Adjust the screen scale and position manually with this function.
Press the Point ►button at Custom and the Custom is displayed on the screen, you can use the Point ▲▼ buttons to choose the item you want to adjust.
Scale H/V | Adjust the Horizontal/Vertical screen |
| scale. |
H&V | When set to On, the aspect ratio is |
| fixed. The Scale V appears dimmed and |
| becomes unavailable. Adjust Scale H, |
| then the screen scale is automatically |
Position H/V | modified based on the aspect ratio. |
Adjust the Horizontal/Vertical screen | |
Common | position. |
Save the adjusted scale or position to all | |
| the inputs. Press the SELECT button at |
| Common to display a confirmation box. |
| To save the scale or position, press the |
| SELECT button at Yes. When Custom |
| is selected, the saved scale or position is |
Reset | used. |
Reset the all adjusted values. Press | |
| the SELECT button at Reset to display |
| a confirmation box. To reset, press the |
| SELECT button at Yes. |
For zooming in and out the images
Digital zoom +
Select Digital zoom +. The
D..zoom + appears. Press the SELECT button to expand the image size. Use the Point ▲▼◄► buttons to pan the image. The Panning function can work only when the image is larger than the screen size.
A projected image can be also expanded by pressing the D.ZOOM ▲ or the SELECT button on the remote control.
Digital zoom –
Select Digital zoom
D..zoom – appears. Press the SELECT button to compress image size.
The projected image can be also compressed by pressing the D.ZOOM ▼ or the SELECT button on the remote control.
To exit the Digital zoom +/– mode, press any button except the D.ZOOM ▲▼ buttons, SELECT and Point buttons.
To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see page
27)again, or adjust the screen size with the D.ZOOM ▲▼ buttons.
Note:
•When no signal is detected, Normal is set automatically .
•The adjustable range for Scale H/V and Position H/V is limited depending on the input signal.
Remote Control
POINT buttons
SELECT button
D..ZOOM + button
D..ZOOM - button
Note:
•The minimum compression ratio is limited depending on the input signal, when the Keystone function is working or when the custom is selected for the screen size.
•True, Full, and Digital zoom +/– cannot be selected when 480i, 575i, 480p or 575p is selected in the PC System Menu (p.28).
•Digital zoom +/- cannot be selected when Full or True is selected.
•When Custom is selected, the Digital zoom - function is disabled.
35