Computer Input
Reset
To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures.
Mode free
To clear the stored data, select Mode free and then press the Point ► or the SELECT button. Move the highlight to the Mode that you want to clear and then press the SELECT button.
Store
To store the adjusted data, select Store and then press the Point ► or the SELECT button. Move the highlight to one of the Modes 1 to 5 in which you want to store, and then press the SELECT button.
Mode free
This Mode has stored parameters.
Values of Total dots, Horizontal,
Vertical, Display area H, and
Display area V.
StoreVacant
Store |
|
|
store? |
Press MENU button | Press SELECT button to |
to close this dialog | store the data. |
box. |
|
Note:
•Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the PC System Menu (p.28).
•When input computer signal to the projector, PC adjust will become available.
31