Setting
Standby mode
This function is available when operating the projector via network.
Network..... Supply the power to the network function even
after turning off the projector by pressing the
Eco............. Select Eco when you do not use the projector
via network. The projector’s network function will stop when turning off the projector, you can not turn on the projector via network.
Refer to the owner’s manual of “Network
Note:
•Factory default is Eco.
•When selecting Network, the cooling fans may be running depending on the temperature inside the projector even if the projector is turned off.
•Set Standby mode to Network when On start, control port or network functions are available.
Closed Caption
Closed Caption is a printed version of the program sound or other information displayed on the screen. If the input signal contains closed captions, you can turn on the feature and switch the channels. Press the Point ▲▼ buttons to select Off, CC1, CC2, CC3 or CC4.
If the closed caption is not clear, you can change the text from Color to White.
Note:
The Closed Caption is available only under the situation below.
•When the input signal is Component (for adjustment only), Video or
•If the system is set to Auto, and choose NTSC or
480i as the input signal, the Closed caption will be available.
•Closed Caption will be unavailable when under other setting conditions.
•The Closed caption is unavailable when
•The item of Closed Caption is displayed in gray while it is not available.
Closed Caption
Press the Point ▲▼ buttons to select Off, CC1, CC2, CC3 or CC4, and then press the SELECT button.
51