Sanyo PLCSW20AR owner manual Operating ON-SCREEN Menu, HOW to Operate ON-SCREEN Menu

BEFORE OPERATION

OPERATING ON-SCREEN MENU

HOW TO OPERATE ON-SCREEN MENU

You can control and adjust this projector through ON-SCREEN MENU. Refer to the following pages to operate each adjustment on ON-SCREEN MENU.

1 DISPLAY MENU

Press MENU button to display ON-SCREEN MENU.

2 MOVING POINTER

Move the pointer (✽ see below) or adjust the value of item by pressing POINT button(s) on Top Control or on Remote Control Unit.

✽Pointer is the icon on ON-SCREEN MENU to select the item. See the figures on the section "FLOW OF ON-SCREEN MENU OPERATION" below.

3 SELECT ITEM

Select the item or set selected function by pressing SELECT button.

REMOTE CONTROL UNIT

TOP CONTROL

MENU

-VOLUME-

IMAGE

SELECT

POINT BUTTON

Used to move the Pointer UP/ DOWN/

RIGHT/ LEFT.

SELECT BUTTON

Used to select the item.

MENU BUTTON

POINT BUTTONS

Used to move the Pointer UP/ DOWN/

RIGHT/ LEFT.

SELECT BUTTON

Used to select the item.

FLOW OF ON-SCREEN MENU OPERATION

Display ON-SCREEN MENU

1	Press MENU button to display ON-SCREEN MENU (MENU
	BAR). A red frame is POINTER.
Select Menu to be adjusted
2	Move POINTER (red frame) to MENU ICON that you want to
	select by pressing POINT RIGHT / LEFT buttons.
Control or adjust item through ON-SCREEN MENU
3	Press POINT DOWN button and move POINTER (red frame
	or red arrow) to ITEM that you want to adjust, and then press

MENU BAR

POINTER (red frame)

Press POINT DOWN button to move POINTER.

ITEM

MENU ICON

POINTER (red frame)

	SELECT button to show ITEM DATA.
4	Adjust ITEM DATA by pressing POINT RIGHT / LEFT
	buttons.

Refer to the following pages for details of respective adjustments.

SELECT

BUTTON

ITEM DATA

Press POINT LEFT/RIGHT buttons to adjust value or set function.

17