Sanyo PLCSW20AR owner manual Auto PC Adjustment, PC Adjust Menu

Page 24

COMPUTER INPUT

PC ADJUSTMENT

AUTO PC ADJUSTMENT

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your computer. Auto PC Adjustment function can be operated as follows.

	Auto PC Adj.
1	Press MENU button and ON-SCREEN MENU will appear. Press
	POINT LEFT/RIGHT button to move a red frame pointer to PC
	ADJUST Menu icon.
2	Press POINT DOWN button to move a red frame pointer to
	AUTO PC Adj. icon and then press SELECT button twice.

This Auto PC Adjustment can be also executed by pressing AUTO PC ADJ. button on Remote Control Unit.

Store adjustment parameters.

Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, the setting can be done just by selecting Mode in PC SYSTEM Menu (P22). Refer to step 3 of MANUAL PC ADJUSTMENT section (P26).

NOTE

●Fine sync, Total dots and Picture Position of some computers can not be fully adjusted with this Auto PC Adjustment function. When the image is not provided properly through this function, manual adjustments are required. (Refer to page 25, 26.)

●Auto PC Adjustment function cannot be operated when “RGB,” “720p (HDTV),” “1035i (HDTV)” or “1080i (HDTV)” is selected on PC SYSTEM Menu (P22).

PC ADJUST MENU

PC ADJUST Menu icon

Move a red frame pointer to AUTO PC

Adj. icon and press SELECT button.

24

Image 24

Contents Model PLC-SW20AR To the Owner Safety Instructions Voor de klanten in NederlandCompliances Plummer Street, Chatsworth, CaliforniaTable of Contents Features and Design Compact DesignPreparation Name of Each Part of ProjectorSETTING-UP Projector Connecting AC Power CordFor Continental Europe Adjustable Feet Preparation Positioning ProjectorPreparation Moving Projector Connecting Projector USB Connector Series BTerminals of Projector Audio ComputerConnecting to Computer Connecting ProjectorTerminals Projector Audio Input External Audio Equipment Audio AmplifierConnecting to Video Equipment Operation of Remote Control Unit Before OperationLaser Pointer Function Remote Control Batteries Installation TOP Controls and Indicators Used to turn the projector on or off. P19Used to select input source. P22 Used to open or close Menu operation. P17HOW to Operate ON-SCREEN Menu Operating ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Before Operation Menu BAR Guide WindowBasic Operation Turning on / OFF ProjectorTurning on Projector Turning OFF ProjectorAdjusting Screen Zoom AdjustmentFocus Adjustment Keystone Adjustment Sound Adjustment Timer Function Basic Operation No Show Function Direct OperationComputer Input Selecting Input SourceSelecting Computer System Select Computer System ManuallyComputer Input Compatible Computer Specifications FreqKHz PC Adjustment Auto PC AdjustmentPC Adjust Menu Auto PC AdjComputer Input Manual PC Adjustment Closes PC Adjust Menu Display areaDisplay area H Full screenPicture Image Adjustment Image Level Select DirectImage Level Select Menu Image 1~4Computer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuVideo Input VideoVideo Component Video Signal Format Selecting Video SystemPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N AV System Menu Video or S-VIDEOPicture level adjusted for the picture with fine tone User preset picture adjustment in Image Adjust Menu P33,34Cinema Video Input Image Level Adjustment Provides image at a normal video aspect ratio of 4 Provides image at a wide screen ratio of 16Setting Setting MenuSetting Menu To change the code of the Remote Control Unit Power managementRemote control Lamp counter resetLamp Replacement AppendixLamp Replace Lamp Handling Precautions Appendix Lamp Replace CounterOperating Wireless Mouse InstallationOperating Wireless Mouse Maintenance AIR Filter Care and CleaningCleaning Projection Lens Troubleshooting Remote Control Unit See Setting section on page 35Does not work Check the batteriesTechnical Specifications Appendix Configurations of Terminals USB Connector Series BOptional Parts Page Page Page Part No 303 2498 1AA6P1P3691-- MS8AA