Sanyo PLCSW20AR owner manual Provides image at a normal video aspect ratio of 4

Page 34

VIDEO INPUT

3 Store

To store the adjustment data, move a red frame pointer to Store icon and press SELECT button. Image Level Menu will appear. Move a red frame pointer to the Image Level 1 to 4 and then press SELECT button.

Other icons operate as follows.

Reset

Reset all adjustment to previous figure.

Quit

Closes IMAGE MENU.

Image Level Menu

Move a red frame pointer to the image icon to be set and then press SELECT button.

Store icon

PICTURE SCREEN ADJUSTMENT

This projector has a picture screen resize function, which enables you to display the desirable image size.

1

Press MENU button and ON-SCREEN MENU will appear. Press

 

POINT LEFT/RIGHT button(s) to move a red frame pointer to

 

SCREEN Menu icon.

2

Press POINT DOWN button and move a red frame pointer to the

 

function that you want to select and then press SELECT button.

Normal

Provides image at a normal video aspect ratio of 4 : 3.

Wide

Provides image at a wide screen ratio of 16 : 9.

SCREEN MENU

SCREEN Menu icon

Move the red frame to the function and press SELECT button.

NOTE : SCREEN Menu cannot be operated when “720p,” “1035i,” or “1080i” is selected on AV SYSTEM Menu (P31).

34

Image 34
Contents Model PLC-SW20AR To the Owner Safety Instructions Voor de klanten in NederlandCompliances Plummer Street, Chatsworth, CaliforniaTable of Contents Features and Design Compact DesignPreparation Name of Each Part of ProjectorConnecting AC Power Cord SETTING-UP ProjectorFor Continental Europe Adjustable Feet Preparation Positioning ProjectorPreparation Moving Projector Terminals of Projector Connecting ProjectorUSB Connector Series B Audio ComputerTerminals Projector Connecting to ComputerConnecting Projector Audio Input External Audio Equipment Audio AmplifierConnecting to Video Equipment Before Operation Operation of Remote Control UnitLaser Pointer Function Remote Control Batteries Installation Used to select input source. P22 TOP Controls and IndicatorsUsed to turn the projector on or off. P19 Used to open or close Menu operation. P17Operating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Before Operation Menu BAR Guide WindowTurning on Projector Basic OperationTurning on / OFF Projector Turning OFF ProjectorFocus Adjustment Adjusting ScreenZoom Adjustment Keystone AdjustmentBasic Operation No Show Function Sound AdjustmentTimer Function Direct OperationSelecting Computer System Computer InputSelecting Input Source Select Computer System ManuallyFreq Computer Input Compatible Computer SpecificationsKHz PC Adjust Menu PC AdjustmentAuto PC Adjustment Auto PC AdjComputer Input Manual PC Adjustment Display area H Closes PC Adjust MenuDisplay area Full screenImage Level Select Menu Picture Image AdjustmentImage Level Select Direct Image 1~4Computer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuVideo Video InputVideo PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N Component Video Signal FormatSelecting Video System AV System Menu Video or S-VIDEOUser preset picture adjustment in Image Adjust Menu P33,34 Picture level adjusted for the picture with fine toneCinema Video Input Image Level Adjustment Provides image at a normal video aspect ratio of 4 Provides image at a wide screen ratio of 16Setting Menu SettingSetting Menu Remote control To change the code of the Remote Control UnitPower management Lamp counter resetAppendix Lamp ReplacementLamp Replace Lamp Handling Precautions Appendix Lamp Replace CounterInstallation Operating Wireless MouseOperating Wireless Mouse AIR Filter Care and Cleaning MaintenanceCleaning Projection Lens Troubleshooting Does not work Remote Control UnitSee Setting section on page 35 Check the batteriesTechnical Specifications USB Connector Series B Appendix Configurations of TerminalsOptional Parts Page Page Page Part No 303 2498 1AA6P1P3691-- MS8AA