Sanyo PLCSW20AR owner manual To the Owner

Page 2

TO THE OWNER

Before operating this projector, read this manual thoroughly to operate the projector properly.

This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time.

Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents.

If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “TROUBLESHOOTING” section at the end of this manual. If the problem still persists, contact the sales dealer where you purchased the projector or the service center.

SAFETY PRECAUTIONS

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

This projector produces intense light from the projection lens. Do not stare directly into the lens as it could possibly damage your eyes. Be especially careful that children do not stare directly into the beam.

This projector should be set in the way indicated. If not, it may result in a fire hazard.

Provide appropriate space on the top, sides and rear of the

 

 

 

SIDE and TOP

 

REAR

 

projector cabinet for allowing air circulation and cooling the

 

 

 

 

 

 

 

 

 

 

20cm

 

 

 

 

 

 

 

 

projector. Minimum clearance must be maintained. If the

 

 

 

 

 

 

 

 

 

 

projector is to be built into a compartment or similarly enclosed,

 

 

 

 

 

 

 

 

 

 

the minimum distances must be maintained. Do not cover the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ventilation slot on the projector. Heat build-up can reduce the

 

 

 

50cm

 

50cm

 

 

50cm

 

 

 

 

 

 

 

 

service life of your projector, and can also be dangerous.

 

 

 

 

 

 

 

 

 

 

Do not put any flammable objects or spray cans near the projector, hot air is exhausted from the ventilation holes.

Remote Control Unit, supplied with this projector, emits a laser beam as a laser pointer function from Laser Light Window while pressing LASER button (for 1 minute / LASER POINTER INDICATOR lights red to indicate laser emission). Do not look into Laser Light Window or shine the laser beam on yourself or other people. Eye damage may result.

If the projector is not to be used for an extended time, unplug the projector from the power outlet.

READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT.

2

Image 2
Contents Model PLC-SW20AR To the Owner Safety Instructions Voor de klanten in NederlandCompliances Plummer Street, Chatsworth, CaliforniaTable of Contents Features and Design Compact DesignPreparation Name of Each Part of ProjectorFor Continental Europe SETTING-UP ProjectorConnecting AC Power Cord Adjustable Feet Preparation Positioning ProjectorPreparation Moving Projector Terminals of Projector Connecting ProjectorUSB Connector Series B Audio ComputerTerminals Projector Connecting to ComputerConnecting Projector Audio Input External Audio Equipment Audio AmplifierConnecting to Video Equipment Laser Pointer Function Operation of Remote Control UnitBefore Operation Remote Control Batteries Installation Used to select input source. P22 TOP Controls and IndicatorsUsed to turn the projector on or off. P19 Used to open or close Menu operation. P17Flow of ON-SCREEN Menu Operation HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Before Operation Menu BAR Guide WindowTurning on Projector Basic OperationTurning on / OFF Projector Turning OFF ProjectorFocus Adjustment Adjusting ScreenZoom Adjustment Keystone AdjustmentBasic Operation No Show Function Sound AdjustmentTimer Function Direct OperationSelecting Computer System Computer InputSelecting Input Source Select Computer System ManuallyKHz Computer Input Compatible Computer SpecificationsFreq PC Adjust Menu PC AdjustmentAuto PC Adjustment Auto PC AdjComputer Input Manual PC Adjustment Display area H Closes PC Adjust MenuDisplay area Full screenImage Level Select Menu Picture Image AdjustmentImage Level Select Direct Image 1~4Computer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuVideo Video InputVideo PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N Component Video Signal FormatSelecting Video System AV System Menu Video or S-VIDEOCinema Picture level adjusted for the picture with fine toneUser preset picture adjustment in Image Adjust Menu P33,34 Video Input Image Level Adjustment Provides image at a normal video aspect ratio of 4 Provides image at a wide screen ratio of 16Setting Menu SettingSetting Menu Remote control To change the code of the Remote Control UnitPower management Lamp counter resetLamp Replace Lamp ReplacementAppendix Lamp Handling Precautions Appendix Lamp Replace CounterOperating Wireless Mouse Operating Wireless MouseInstallation Cleaning Projection Lens MaintenanceAIR Filter Care and Cleaning Troubleshooting Does not work Remote Control UnitSee Setting section on page 35 Check the batteriesTechnical Specifications Optional Parts Appendix Configurations of TerminalsUSB Connector Series B Page Page Page Part No 303 2498 1AA6P1P3691-- MS8AA