Sanyo PLCSW20AR owner manual Selecting Video System, PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N

Page 31

VIDEO INPUT

SELECTING VIDEO SYSTEM

1

Press MENU button and ON-SCREEN MENU will appear. Press

 

POINT LEFT/RIGHT buttons to move a red frame pointer to AV

 

SYSTEM Menu icon.

2

Press POINT DOWN button to move a red arrow pointer to the

 

system that you want to select and then press SELECT button.

VIDEO JACK OR S-VIDEO JACK

Auto

Projector automatically detects incoming Video system, and adjusts itself to optimize its performance.

When Video System is PAL-M or PAL-N, select system manually.

PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N

If projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

AV SYSTEM MENU (VIDEO OR S-VIDEO)

AV SYSTEM Menu icon

This box indicates the system being selected.

Move the pointer to the system and press SELECT button.

Y, Pb/Cb, Pr/Cr JACKS

Auto

Projector automatically detects incoming Video signal, and adjusts itself to optimize its performance.

COMPONENT VIDEO SIGNAL FORMAT

If projector cannot reproduce proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i and 1080i.

AV SYSTEM MENU (COMPONENT VIDEO)

AV SYSTEM Menu icon

This box indicates the system being selected.

Move the pointer to the system and press SELECT button.

31

Image 31
Contents Model PLC-SW20AR To the Owner Voor de klanten in Nederland Safety InstructionsPlummer Street, Chatsworth, California CompliancesTable of Contents Compact Design Features and DesignName of Each Part of Projector PreparationConnecting AC Power Cord SETTING-UP ProjectorFor Continental Europe Preparation Positioning Projector Adjustable FeetPreparation Moving Projector Audio Computer Connecting ProjectorUSB Connector Series B Terminals of ProjectorAudio Input External Audio Equipment Audio Amplifier Connecting to ComputerConnecting Projector Terminals ProjectorConnecting to Video Equipment Before Operation Operation of Remote Control UnitLaser Pointer Function Remote Control Batteries Installation Used to open or close Menu operation. P17 TOP Controls and IndicatorsUsed to turn the projector on or off. P19 Used to select input source. P22Operating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Guide Window Before Operation Menu BARTurning OFF Projector Basic OperationTurning on / OFF Projector Turning on ProjectorKeystone Adjustment Adjusting ScreenZoom Adjustment Focus AdjustmentDirect Operation Sound AdjustmentTimer Function Basic Operation No Show FunctionSelect Computer System Manually Computer InputSelecting Input Source Selecting Computer SystemFreq Computer Input Compatible Computer SpecificationsKHz Auto PC Adj PC AdjustmentAuto PC Adjustment PC Adjust MenuComputer Input Manual PC Adjustment Full screen Closes PC Adjust MenuDisplay area Display area HImage 1~4 Picture Image AdjustmentImage Level Select Direct Image Level Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Video InputVideo AV System Menu Video or S-VIDEO Component Video Signal FormatSelecting Video System PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-NUser preset picture adjustment in Image Adjust Menu P33,34 Picture level adjusted for the picture with fine toneCinema Video Input Image Level Adjustment Provides image at a wide screen ratio of 16 Provides image at a normal video aspect ratio of 4Setting Menu SettingSetting Menu Lamp counter reset To change the code of the Remote Control UnitPower management Remote controlAppendix Lamp ReplacementLamp Replace Appendix Lamp Replace Counter Lamp Handling PrecautionsInstallation Operating Wireless MouseOperating Wireless Mouse AIR Filter Care and Cleaning MaintenanceCleaning Projection Lens Troubleshooting Check the batteries Remote Control UnitSee Setting section on page 35 Does not workTechnical Specifications USB Connector Series B Appendix Configurations of TerminalsOptional Parts Page Page Page Part No 303 2498 1AA6P1P3691-- MS8AA