Sanyo PDG-DHT8000L Basic Operation, Turning On the Projector, Enter a PIN code, What is PIN code?

Page 24

Basic Operation

Turning On the Projector

1

Complete peripheral connections (with a computer,

VCR, etc.) before turning on the projector.

2

Connect the projector’s AC power cord into an AC

 

outlet and turn on the MAIN ON/OFF Switch. The

 

LAMP indicator lights red and the POWER indicator

 

lights green.

3

Press the ON/STAND-BY button on the side control

or on the remote control. The LAMP indicator

 

dims red and the cooling fans start to operate. The

 

preparation display appears on the screen and the

 

countdown starts.

4

After the countdown, the input source that was

selected the last time and the Lamp status icon

(see page 67) appear on the screen.

If the projector is locked with a PIN code, PIN code Input Dialog Box will appear. Enter the PIN code as instructed below.

Enter a PIN code

Use the Point ed buttons on the side control or on the remote control to enter a number. Press the Point 8 button to fix the number and move the red frame pointer to the next box. The number changes to “✳.” Repeat this step to complete entering a four-digit number. After entering the four-digit number, move the pointer to “Set.” Press the SELECT button so that you can start to operate the projector.

If you fixed an incorrect number, use the Point 7 button to move the pointer to the number you want to correct, and then enter the correct number.

If you entered an incorrect PIN code, “PIN code” and the number (✳✳✳✳) will turn red for a moment. Enter the correct PIN code all over again.

What is PIN code?

PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting a PIN code prevents unauthorized use of the projector.

A PIN code consists of a four-digit number. Refer to the PIN code lock function in the Setting Menu on pages 58- 59 for locking operation of the projector with your PIN code.

CAUTION ON HANDLING PIN CODE

If you forget your PIN code, the projector can no longer be started. Take special care in setting a new PIN code; write down the number in a column on page 88 of this manual and keep it on hand. Should the PIN code be missing or forgotten, consult your dealer or service center.

16

The preparation display will disappear after 20 seconds.

Selected Input Source and Lamp control

Lamp status

See page 67 for the Lamp mode status

✔Note:

•The Lamp replacement icon and the Filter warning icon may appear on the screen depending on the usage state of the projector.

•If the filter cartridge is not installed in the projector, the Warning Filter indicator does not light up and the Filter warning icon does not appear.

PIN code Input Dialog Box

After the OK icon disappears, you can operate the projector.

✔Note:

•When the Logo select function is set to “Off,” the logo will not be shown on the screen (p.54). •When the “Countdown off” or “Off” is selected in the Display function, the countdown will not be shown on the screen (p.49).

•During the countdown period, all operations except for Zoom, Focus, and Lens-shift functions are invalid. If the projector has been locked with a PIN code, however, Zoom, Focus, and Lens-shift functions are also invalid.

•If you press the ON/STAND-BY button on the side control or the remote control during the countdown period, you can skip the countdown and go to the normal operations.

•If the PIN code number is not entered within three minutes after the PIN code dialog box appeared, the projector will be turned off automatically.

•The “1234” is set as the initial PIN code at the factory.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Model PDG-DHT8000L Features and Design Table of Contents To The Owner For EU UsersSafety Instructions Air Circulation Top PanelInstalling the Projector in Proper Directions Positioning PrecautionsMoving the Projector AC Power Cord for the United States and Canada AC Power Cord for the United KingdomCompliance Canadian Radio Interference RegulationsPart Names and Functions Front!0Back Terminals and Connectors Side Control and Indicators Side ControlIndicators Remote Control Remote Control Battery Installation Remote Control Receivers and Operating RangeWired Remote Control Remote Control Code Installation Lens InstallationPicture Level and Pitch Adjustment Positioning ProjectorLens Shift Adjustment When the lens is shifted to topWhen the lens is shifted to bottom Replacement of Terminal Terminals of ProjectorConnecting to Computer Cables used for connectionTerminals of the projector Connecting to Video Equipment Monitor Out Signal TableProjector Attaching the Cable Tie To loosen the cable tieConnecting the AC Power Cord For the U..KFor the U..S..A.. and Canada For Continental Europe What is PIN code? Basic OperationTurning On the Projector Enter a PIN codeUnplug the AC power cord from the AC outlet Turning Off the ProjectorHow to Operate the On-Screen Menu Remote ControlSide Control On-Screen MenuMenu Bar Operating with Projector Control Information Operating with Remote Control Timer button Shutter buttonFilter button Image ADJ.. buttonRemote Control Operation Input SelectionInput Side Control OperationWhen Selecting the Input 1 with DVI/D-sub 15 terminals Computer Input Source SelectionMenu Operation Input MenuVideo Input Source Selection RGB ScartRGB AV Hdcp Pb/Cb, Pr/CrComputer Input Computer System SelectionAutomatic Multi-Scan System Selecting Computer System ManuallyAuto PC Adjustment To store the adjusted parametersPC Adjust Menu Direct OperationManual PC Adjustment Reset Mode freeTo clear the adjusted data To store the adjusted dataImage Level Selection Standard Real Dynamic Image1 Image SEL.. buttonStandard ImageScreen Size Adjustment Screen MenuKeystone CeilingRear Digital zoom +Video Input Video System SelectionVideo Jack or S-Video Jack Pb/Cb, Pr/Cr JacksStandard Cinema Dynamic Image1 Image SEL.. button Natural Wide Keystone Image Adjustment Image Adjust MenuPointer Mode Picture ImageColor M MenuColor Palette DELWhite balance Red/Green/Blue Offset Red/Green/BlueSharpness GammaSetting SettingLamp mode BackgroundLamp control Lamp life controlPicture in Picture Edge blending Color matchingDynamicBlack Advanced color matchingHdmi setup LogoLogo select CaptureChange the Logo PIN code lock setting Enter a Logo PIN codeChange the Logo PIN code Remote control To change the code for the remote controlTo reset the code for the remote control Filter controlPower management On startSecurity Key lock PIN code lockSecurity Key lock PIN code lockChange the PIN Code Lock setting Change the PIN code lock settingChange the PIN Code Enter a PIN codeShutter ProtectionEffect Release keyVideo delay control Closed captionFrame lock Filter counter  Last scroll iconFactory default Test patternMaintenance and Care Filter InstructionsReset the filter counter and the scroll counter p.66 Service Parts Code 610 350Replacing the Filter Cartridge Filter counter Scroll counterLamp 1/2 Replace Indicators Lamp Mode ChangeoverLamp Management Lamp Status DisplayLamp Replacement IndicatorsLamp 1 / 2 Replace indicators Replacement Lamp Type No Model No.. of your projectorOptional Color Wheel Installation Cleaning the Projection Lens Cleaning the Projector CabinetLamp indicator lights on and other indicators blink Then check the matters belowTroubleshooting AppendixAppendix Power is turned off Information Image Adjust Menu TreeComputer Input/Video Input NetworkPC Adjust SystemImage Select ScreenEdge blending Languages provided. Quit Indicators and Projector Condition Projector is operating normallyProjector is detecting abnormal condition Lamp Replace 1If the Filter counter reached a time set in the timer Compatible Computer Specifications ON-SCREEN ResolutionFreq..kHz Freq..Hz Display30.000 Supported Signal Format for Optional Board List of Picture in PictureTechnical Specifications Optional Parts POA-AMD17SDIDConfigurations of Terminals InputOutput PIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No Dimensions Unit inch mmFunctional Execution Command Serial Control InterfaceOperation ExampleStatus Read Command How to adjust multiple screens Edge blendingColor matching Fig..1 For rich color reproduction color wheelKE2AL

PDG-DHT8000L specifications

The Sanyo PDG-DHT8000L is a high-performance projector designed for a variety of professional environments, offering outstanding image quality, advanced technologies, and versatile connectivity options. Ideal for corporate presentations, educational settings, and large venue applications, this projector stands out for its combination of robust features and user-friendly design.

At the heart of the PDG-DHT8000L is its advanced DLP (Digital Light Processing) technology. This ensures exceptional image clarity and brightness, with a remarkable resolution of 1920 x 1080 pixels, allowing for brilliant Full HD visuals. The projector achieves a brightness level of up to 8000 ANSI lumens, making it suitable for use in well-lit environments without sacrificing image quality. This high brightness is complemented by a high contrast ratio that enhances the depth and detail in images, ensuring that presentations are impactful and engaging.

Another significant feature of the PDG-DHT8000L is its comprehensive lens options. The projector supports interchangeable lenses, which provide flexibility in installation and allows users to choose the ideal lens to match their specific projection needs. This capability makes it easy to adapt the projector to various room sizes and layouts, ensuring optimal performance in any setting.

The PDG-DHT8000L also incorporates advanced color technology, including a color wheel that enhances color reproduction. This results in rich, vibrant colors that create an immersive viewing experience. Additionally, the projector features various color adjustment settings, making it easier for users to calibrate the device according to their preferences or specific lighting conditions.

In terms of connectivity, the Sanyo PDG-DHT8000L excels with multiple input options, including HDMI, RGB, and composite video, enabling seamless integration with various devices such as laptops, Blu-ray players, and gaming consoles. The projector also supports network connectivity, allowing for easy remote control and management over a LAN connection, which is particularly useful in corporate and educational environments.

With a robust build quality and reliable performance, the Sanyo PDG-DHT8000L is designed for longevity and ease of use. Its user-friendly interface and intuitive control features make operation straightforward, while its robust cooling system ensures efficient performance even during long presentations. Overall, the Sanyo PDG-DHT8000L is a powerful tool that delivers exceptional visual quality and versatility, making it an excellent choice for professionals seeking a reliable projection solution.
Top Page Image Contents