Sanyo PDG-DHT8000L owner manual Connecting the AC Power Cord, For the U..K

Page 23

Installation

Connecting the AC Power Cord

This projector uses nominal input voltages of 100-240 V AC. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.

If you are not sure of the type of power being supplied, consultHoles your authorized dealer or service center.

Connect the projector with all peripheral equipment before turning on the projector.

A fixing bracket is provided to prevent the AC power cord from coming loose. Follow these steps to attach the fixing bracket and connect the AC power cord to the projector.

1

Fit a fixing bracket in each hole.

2

Connect the AC power cord to the projector.

3

Turn the fixing bracket to lock the AC power cord in place.

 

(See the right figure.)

CAUTION

The AC outlet must be near this equipment and must be easily accessible.

Note:

•Unplug the AC power cord or turn off the MAIN ON/OFF Switch when the projector is not in use. When the projector is in stand-by mode, it consumes a little electric power.

Fixing bracket

NOTE ON THE POWER CORD

AC power cord must meet the requirements of the country where you use the projector.

Confirm the AC plug type with the chart below and proper AC power cord must be used.

If the supplied AC power cord does not match your AC outlet, contact your sales dealer.

Projector side

AC Outlet side

 

For the U..S..A.. and Canada

For Continental Europe

For the U..K..

Ground

 

Ground

To POWER CORD

 

 

 

CONNECTOR on your

To the AC Outlet.

To the AC Outlet.

To the AC Outlet.

projector.

(120 V AC)

(200–240 V AC)

(200–240 V AC)

23

Image 23
Contents Model PDG-DHT8000L Features and Design Table of Contents For EU Users To The OwnerSafety Instructions Top Panel Air CirculationPositioning Precautions Installing the Projector in Proper DirectionsMoving the Projector Canadian Radio Interference Regulations AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom ComplianceBack Part Names and FunctionsFront!0 Terminals and Connectors Side Control Side Control and IndicatorsIndicators Remote Control Wired Remote Control Remote Control Battery InstallationRemote Control Receivers and Operating Range Remote Control Code Positioning Projector InstallationLens Installation Picture Level and Pitch AdjustmentWhen the lens is shifted to bottom Lens Shift AdjustmentWhen the lens is shifted to top Terminals of Projector Replacement of TerminalTerminals of the projector Connecting to ComputerCables used for connection Projector Connecting to Video EquipmentMonitor Out Signal Table To loosen the cable tie Attaching the Cable TieFor the U..S..A.. and Canada For Continental Europe Connecting the AC Power CordFor the U..K Enter a PIN code What is PIN code?Basic Operation Turning On the ProjectorTurning Off the Projector Unplug the AC power cord from the AC outletOn-Screen Menu How to Operate the On-Screen MenuRemote Control Side ControlMenu Bar Operating with Projector Control Information Operating with Remote Control Image ADJ.. button Timer buttonShutter button Filter buttonSide Control Operation Remote Control OperationInput Selection InputInput Menu When Selecting the Input 1 with DVI/D-sub 15 terminalsComputer Input Source Selection Menu OperationPb/Cb, Pr/Cr Video Input Source SelectionRGB Scart RGB AV HdcpSelecting Computer System Manually Computer InputComputer System Selection Automatic Multi-Scan SystemDirect Operation Auto PC AdjustmentTo store the adjusted parameters PC Adjust MenuManual PC Adjustment To store the adjusted data ResetMode free To clear the adjusted dataImage Image Level SelectionStandard Real Dynamic Image1 Image SEL.. button StandardScreen Menu Screen Size AdjustmentDigital zoom + KeystoneCeiling RearPb/Cb, Pr/Cr Jacks Video InputVideo System Selection Video Jack or S-Video JackStandard Cinema Dynamic Image1 Image SEL.. button Natural Wide Keystone Picture Image Image AdjustmentImage Adjust Menu Pointer ModeDEL Color MMenu Color PaletteGamma White balance Red/Green/BlueOffset Red/Green/Blue SharpnessSetting SettingLamp life control Lamp modeBackground Lamp controlPicture in Picture Color matching Edge blendingAdvanced color matching DynamicBlackCapture Hdmi setupLogo Logo selectChange the Logo PIN code Change the Logo PIN code lock settingEnter a Logo PIN code Filter control Remote controlTo change the code for the remote control To reset the code for the remote controlOn start Power managementKey lock PIN code lock Security Key lockPIN code lock SecurityEnter a PIN code Change the PIN Code Lock settingChange the PIN code lock setting Change the PIN CodeRelease key ShutterProtection EffectFrame lock Video delay controlClosed caption  Last scroll icon Filter counterTest pattern Factory defaultFilter Instructions Maintenance and CareReplacing the Filter Cartridge Reset the filter counter and the scroll counter p.66Service Parts Code 610 350 Scroll counter Filter counterLamp Status Display Lamp 1/2 Replace IndicatorsLamp Mode Changeover Lamp ManagementLamp 1 / 2 Replace indicators Lamp ReplacementIndicators Model No.. of your projector Replacement Lamp Type NoOptional Color Wheel Installation Cleaning the Projector Cabinet Cleaning the Projection LensThen check the matters below Lamp indicator lights on and other indicators blinkAppendix TroubleshootingAppendix Power is turned off Network Information Image AdjustMenu Tree Computer Input/Video InputScreen PC AdjustSystem Image SelectEdge blending Languages provided. Quit Projector is operating normally Indicators and Projector ConditionLamp Replace 1 Projector is detecting abnormal conditionIf the Filter counter reached a time set in the timer Display Compatible Computer SpecificationsON-SCREEN Resolution Freq..kHz Freq..Hz30.000 List of Picture in Picture Supported Signal Format for Optional BoardTechnical Specifications POA-AMD17SDID Optional PartsOutput Configurations of TerminalsInput Logo PIN Code Lock No PIN Code Number MemoPIN Code Lock No Unit inch mm DimensionsExample Functional Execution CommandSerial Control Interface OperationStatus Read Command Edge blending How to adjust multiple screensFig..1 For rich color reproduction color wheel Color matchingKE2AL

PDG-DHT8000L specifications

The Sanyo PDG-DHT8000L is a high-performance projector designed for a variety of professional environments, offering outstanding image quality, advanced technologies, and versatile connectivity options. Ideal for corporate presentations, educational settings, and large venue applications, this projector stands out for its combination of robust features and user-friendly design.

At the heart of the PDG-DHT8000L is its advanced DLP (Digital Light Processing) technology. This ensures exceptional image clarity and brightness, with a remarkable resolution of 1920 x 1080 pixels, allowing for brilliant Full HD visuals. The projector achieves a brightness level of up to 8000 ANSI lumens, making it suitable for use in well-lit environments without sacrificing image quality. This high brightness is complemented by a high contrast ratio that enhances the depth and detail in images, ensuring that presentations are impactful and engaging.

Another significant feature of the PDG-DHT8000L is its comprehensive lens options. The projector supports interchangeable lenses, which provide flexibility in installation and allows users to choose the ideal lens to match their specific projection needs. This capability makes it easy to adapt the projector to various room sizes and layouts, ensuring optimal performance in any setting.

The PDG-DHT8000L also incorporates advanced color technology, including a color wheel that enhances color reproduction. This results in rich, vibrant colors that create an immersive viewing experience. Additionally, the projector features various color adjustment settings, making it easier for users to calibrate the device according to their preferences or specific lighting conditions.

In terms of connectivity, the Sanyo PDG-DHT8000L excels with multiple input options, including HDMI, RGB, and composite video, enabling seamless integration with various devices such as laptops, Blu-ray players, and gaming consoles. The projector also supports network connectivity, allowing for easy remote control and management over a LAN connection, which is particularly useful in corporate and educational environments.

With a robust build quality and reliable performance, the Sanyo PDG-DHT8000L is designed for longevity and ease of use. Its user-friendly interface and intuitive control features make operation straightforward, while its robust cooling system ensures efficient performance even during long presentations. Overall, the Sanyo PDG-DHT8000L is a powerful tool that delivers exceptional visual quality and versatility, making it an excellent choice for professionals seeking a reliable projection solution.