Sanyo PDG-DHT8000L owner manual Lens Installation, Positioning Projector

Page 17

Installation

Lens Installation

Before setting up the projector, install Projection Lens on the projector.

Before installation, check where the projector is used and prepare a suitable lens. For the specifications of Projection Lens, contact sales dealer where you purchased the projector.

- Lens installation and replacement should be made by the qualified service personnel..

-When setting the projector after lens installation, be sure to replace a Lens Cap to protect a surface.

-When carrying or holding up the projector, be careful not to put your hands on lens part. It may damage lens, cabinet, or mechanical parts.

✔Note:

•When the lens is not installed properly, ‘Lens incorrectly fitted!‘ message appears on the screen.

Positioning Projector

This projector is designed to project on a flat projection

SCREEN

 

surface.

 

✔Note:

•Brightness in room has a great influence on picture quality. It is recommended to limit ambient lighting in order to provide the best image.

Picture Level and Pitch Adjustment

 

The projection angle is adjustable up to 5 degrees upward

 

and downward respectively by rotating front and back

 

feet.

 

To raise the projector, rotate the feet clockwise.

 

To lower the projector or to retract the adjustable feet,

 

rotate the feet counterclockwise.

 

To correct keystone distortion, press the KEYSTONE

REAR

button on the remote control or select Keystone from the

ADJUSTABLE

menu (see pages 14, 31, 41, 45).

FEET (Refer to

ADJUSTABLE

FEET

p.10)

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Model PDG-DHT8000L Features and Design Table of Contents For EU Users To The OwnerSafety Instructions Top Panel Air CirculationPositioning Precautions Installing the Projector in Proper DirectionsMoving the Projector AC Power Cord for the United Kingdom AC Power Cord for the United States and CanadaCompliance Canadian Radio Interference RegulationsBack Part Names and FunctionsFront!0 Terminals and Connectors Side Control Side Control and IndicatorsIndicators Remote Control Wired Remote Control Remote Control Battery InstallationRemote Control Receivers and Operating Range Remote Control Code Lens Installation InstallationPicture Level and Pitch Adjustment Positioning ProjectorWhen the lens is shifted to bottom Lens Shift AdjustmentWhen the lens is shifted to top Terminals of Projector Replacement of TerminalTerminals of the projector Connecting to ComputerCables used for connection Projector Connecting to Video EquipmentMonitor Out Signal Table To loosen the cable tie Attaching the Cable TieFor the U..S..A.. and Canada For Continental Europe Connecting the AC Power CordFor the U..K Basic Operation What is PIN code?Turning On the Projector Enter a PIN codeTurning Off the Projector Unplug the AC power cord from the AC outletRemote Control How to Operate the On-Screen MenuSide Control On-Screen MenuMenu Bar Operating with Projector Control Information Operating with Remote Control Shutter button Timer buttonFilter button Image ADJ.. buttonInput Selection Remote Control OperationInput Side Control OperationComputer Input Source Selection When Selecting the Input 1 with DVI/D-sub 15 terminalsMenu Operation Input MenuRGB Scart Video Input Source SelectionRGB AV Hdcp Pb/Cb, Pr/CrComputer System Selection Computer InputAutomatic Multi-Scan System Selecting Computer System ManuallyTo store the adjusted parameters Auto PC AdjustmentPC Adjust Menu Direct OperationManual PC Adjustment Mode free ResetTo clear the adjusted data To store the adjusted dataStandard Real Dynamic Image1 Image SEL.. button Image Level SelectionStandard ImageScreen Menu Screen Size AdjustmentCeiling KeystoneRear Digital zoom +Video System Selection Video InputVideo Jack or S-Video Jack Pb/Cb, Pr/Cr JacksStandard Cinema Dynamic Image1 Image SEL.. button Natural Wide Keystone Image Adjust Menu Image AdjustmentPointer Mode Picture ImageMenu Color MColor Palette DELOffset Red/Green/Blue White balance Red/Green/BlueSharpness GammaSetting SettingBackground Lamp modeLamp control Lamp life controlPicture in Picture Color matching Edge blendingAdvanced color matching DynamicBlackLogo Hdmi setupLogo select CaptureChange the Logo PIN code Change the Logo PIN code lock settingEnter a Logo PIN code To change the code for the remote control Remote controlTo reset the code for the remote control Filter controlOn start Power managementPIN code lock Security Key lockSecurity Key lock PIN code lockChange the PIN code lock setting Change the PIN Code Lock settingChange the PIN Code Enter a PIN codeProtection ShutterEffect Release keyFrame lock Video delay controlClosed caption  Last scroll icon Filter counterTest pattern Factory defaultFilter Instructions Maintenance and CareReplacing the Filter Cartridge Reset the filter counter and the scroll counter p.66Service Parts Code 610 350 Scroll counter Filter counterLamp Mode Changeover Lamp 1/2 Replace IndicatorsLamp Management Lamp Status DisplayLamp 1 / 2 Replace indicators Lamp ReplacementIndicators Model No.. of your projector Replacement Lamp Type NoOptional Color Wheel Installation Cleaning the Projector Cabinet Cleaning the Projection LensThen check the matters below Lamp indicator lights on and other indicators blinkAppendix TroubleshootingAppendix Power is turned off Menu Tree Information Image AdjustComputer Input/Video Input NetworkSystem PC AdjustImage Select ScreenEdge blending Languages provided. Quit Projector is operating normally Indicators and Projector ConditionLamp Replace 1 Projector is detecting abnormal conditionIf the Filter counter reached a time set in the timer ON-SCREEN Resolution Compatible Computer SpecificationsFreq..kHz Freq..Hz Display30.000 List of Picture in Picture Supported Signal Format for Optional BoardTechnical Specifications POA-AMD17SDID Optional PartsOutput Configurations of TerminalsInput Logo PIN Code Lock No PIN Code Number MemoPIN Code Lock No Unit inch mm DimensionsSerial Control Interface Functional Execution CommandOperation ExampleStatus Read Command Edge blending How to adjust multiple screensFig..1 For rich color reproduction color wheel Color matchingKE2AL

PDG-DHT8000L specifications

The Sanyo PDG-DHT8000L is a high-performance projector designed for a variety of professional environments, offering outstanding image quality, advanced technologies, and versatile connectivity options. Ideal for corporate presentations, educational settings, and large venue applications, this projector stands out for its combination of robust features and user-friendly design.

At the heart of the PDG-DHT8000L is its advanced DLP (Digital Light Processing) technology. This ensures exceptional image clarity and brightness, with a remarkable resolution of 1920 x 1080 pixels, allowing for brilliant Full HD visuals. The projector achieves a brightness level of up to 8000 ANSI lumens, making it suitable for use in well-lit environments without sacrificing image quality. This high brightness is complemented by a high contrast ratio that enhances the depth and detail in images, ensuring that presentations are impactful and engaging.

Another significant feature of the PDG-DHT8000L is its comprehensive lens options. The projector supports interchangeable lenses, which provide flexibility in installation and allows users to choose the ideal lens to match their specific projection needs. This capability makes it easy to adapt the projector to various room sizes and layouts, ensuring optimal performance in any setting.

The PDG-DHT8000L also incorporates advanced color technology, including a color wheel that enhances color reproduction. This results in rich, vibrant colors that create an immersive viewing experience. Additionally, the projector features various color adjustment settings, making it easier for users to calibrate the device according to their preferences or specific lighting conditions.

In terms of connectivity, the Sanyo PDG-DHT8000L excels with multiple input options, including HDMI, RGB, and composite video, enabling seamless integration with various devices such as laptops, Blu-ray players, and gaming consoles. The projector also supports network connectivity, allowing for easy remote control and management over a LAN connection, which is particularly useful in corporate and educational environments.

With a robust build quality and reliable performance, the Sanyo PDG-DHT8000L is designed for longevity and ease of use. Its user-friendly interface and intuitive control features make operation straightforward, while its robust cooling system ensures efficient performance even during long presentations. Overall, the Sanyo PDG-DHT8000L is a powerful tool that delivers exceptional visual quality and versatility, making it an excellent choice for professionals seeking a reliable projection solution.
Top Page Image Contents