Sanyo PDG-DHT8000L owner manual Power management, On start

Page 57

Setting

Power management

For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not used for a certain period.

If the input signal is interrupted and no button is pressed for more than 30 seconds, the timer display with “No signal” appears. It starts the countdown until the lamp is turned off. The countdown time can be set between 1 and 30 minutes.

Use the Point 7 8 buttons to set the countdown timer.

Select one of the following options:

Ready . .

When the lamp has been fully cooled down,

 

the POWER indicator starts blinking. In this

 

condition, the projection lamp is turned on if the

 

input signal is reconnected or any button on the

 

side control or remote control is pressed .

Shutdown .

When the lamp has been fully cooled down, the

 

power is turned off.

Off . . .

Power Management function is off.

On start

When this function is set to “On,” the projector will be automatically turned on just by connecting the AC power cord to the wall outlet.

✔Note:

•Make sure that the MAIN ON / OFF switch is ON, otherwise the On start function does not work.

•Be sure to turn off the projector properly (see “Turning Off the Projector” on page 25). If the projector is turned off in the incorrect sequence, the On start function does not work properly.

Power management

Time left before the lamp is off

Press the SELECT button at Power management and the dialog box appears. Use the Point 7 8 buttons to choose one of the three options. Press the Point d button to select the timer, and then use the Point 7 8 buttons to set the timer.

✔Note:

•Factory default is “Ready: 5 min.”

•When the shutter is closed while the Power management function is working, the Power management function is released.

57

Page 56 Page 58
Image 57
Page 56 Page 58
Contents Model PDG-DHT8000L Features and Design Table of Contents For EU Users To The OwnerSafety Instructions Top Panel Air CirculationPositioning Precautions Installing the Projector in Proper DirectionsMoving the Projector AC Power Cord for the United Kingdom AC Power Cord for the United States and CanadaCompliance Canadian Radio Interference RegulationsPart Names and Functions Front!0Back Terminals and Connectors Side Control Side Control and IndicatorsIndicators Remote Control Remote Control Battery Installation Remote Control Receivers and Operating RangeWired Remote Control Remote Control Code Lens Installation InstallationPicture Level and Pitch Adjustment Positioning ProjectorLens Shift Adjustment When the lens is shifted to topWhen the lens is shifted to bottom Terminals of Projector Replacement of TerminalConnecting to Computer Cables used for connectionTerminals of the projector Connecting to Video Equipment Monitor Out Signal TableProjector To loosen the cable tie Attaching the Cable TieConnecting the AC Power Cord For the U..KFor the U..S..A.. and Canada For Continental Europe Basic Operation What is PIN code?Turning On the Projector Enter a PIN codeTurning Off the Projector Unplug the AC power cord from the AC outletRemote Control How to Operate the On-Screen MenuSide Control On-Screen MenuMenu Bar Operating with Projector Control Information Operating with Remote Control Shutter button Timer buttonFilter button Image ADJ.. buttonInput Selection Remote Control OperationInput Side Control OperationComputer Input Source Selection When Selecting the Input 1 with DVI/D-sub 15 terminalsMenu Operation Input MenuRGB Scart Video Input Source SelectionRGB AV Hdcp Pb/Cb, Pr/CrComputer System Selection Computer InputAutomatic Multi-Scan System Selecting Computer System ManuallyTo store the adjusted parameters Auto PC AdjustmentPC Adjust Menu Direct OperationManual PC Adjustment Mode free ResetTo clear the adjusted data To store the adjusted dataStandard Real Dynamic Image1 Image SEL.. button Image Level SelectionStandard ImageScreen Menu Screen Size AdjustmentCeiling KeystoneRear Digital zoom +Video System Selection Video InputVideo Jack or S-Video Jack Pb/Cb, Pr/Cr JacksStandard Cinema Dynamic Image1 Image SEL.. button Natural Wide Keystone Image Adjust Menu Image AdjustmentPointer Mode Picture ImageMenu Color MColor Palette DELOffset Red/Green/Blue White balance Red/Green/BlueSharpness GammaSetting SettingBackground Lamp modeLamp control Lamp life controlPicture in Picture Color matching Edge blendingAdvanced color matching DynamicBlackLogo Hdmi setupLogo select CaptureChange the Logo PIN code lock setting Enter a Logo PIN codeChange the Logo PIN code To change the code for the remote control Remote controlTo reset the code for the remote control Filter controlOn start Power managementPIN code lock Security Key lockSecurity Key lock PIN code lockChange the PIN code lock setting Change the PIN Code Lock settingChange the PIN Code Enter a PIN codeProtection ShutterEffect Release keyVideo delay control Closed captionFrame lock  Last scroll icon Filter counterTest pattern Factory defaultFilter Instructions Maintenance and CareReset the filter counter and the scroll counter p.66 Service Parts Code 610 350Replacing the Filter Cartridge Scroll counter Filter counterLamp Mode Changeover Lamp 1/2 Replace IndicatorsLamp Management Lamp Status DisplayLamp Replacement IndicatorsLamp 1 / 2 Replace indicators Model No.. of your projector Replacement Lamp Type NoOptional Color Wheel Installation Cleaning the Projector Cabinet Cleaning the Projection LensThen check the matters below Lamp indicator lights on and other indicators blinkAppendix TroubleshootingAppendix Power is turned off Menu Tree Information Image AdjustComputer Input/Video Input NetworkSystem PC AdjustImage Select ScreenEdge blending Languages provided. Quit Projector is operating normally Indicators and Projector ConditionLamp Replace 1 Projector is detecting abnormal conditionIf the Filter counter reached a time set in the timer ON-SCREEN Resolution Compatible Computer SpecificationsFreq..kHz Freq..Hz Display30.000 List of Picture in Picture Supported Signal Format for Optional BoardTechnical Specifications POA-AMD17SDID Optional PartsConfigurations of Terminals InputOutput PIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No Unit inch mm DimensionsSerial Control Interface Functional Execution CommandOperation ExampleStatus Read Command Edge blending How to adjust multiple screensFig..1 For rich color reproduction color wheel Color matchingKE2AL

PDG-DHT8000L specifications

The Sanyo PDG-DHT8000L is a high-performance projector designed for a variety of professional environments, offering outstanding image quality, advanced technologies, and versatile connectivity options. Ideal for corporate presentations, educational settings, and large venue applications, this projector stands out for its combination of robust features and user-friendly design.

At the heart of the PDG-DHT8000L is its advanced DLP (Digital Light Processing) technology. This ensures exceptional image clarity and brightness, with a remarkable resolution of 1920 x 1080 pixels, allowing for brilliant Full HD visuals. The projector achieves a brightness level of up to 8000 ANSI lumens, making it suitable for use in well-lit environments without sacrificing image quality. This high brightness is complemented by a high contrast ratio that enhances the depth and detail in images, ensuring that presentations are impactful and engaging.

Another significant feature of the PDG-DHT8000L is its comprehensive lens options. The projector supports interchangeable lenses, which provide flexibility in installation and allows users to choose the ideal lens to match their specific projection needs. This capability makes it easy to adapt the projector to various room sizes and layouts, ensuring optimal performance in any setting.

The PDG-DHT8000L also incorporates advanced color technology, including a color wheel that enhances color reproduction. This results in rich, vibrant colors that create an immersive viewing experience. Additionally, the projector features various color adjustment settings, making it easier for users to calibrate the device according to their preferences or specific lighting conditions.

In terms of connectivity, the Sanyo PDG-DHT8000L excels with multiple input options, including HDMI, RGB, and composite video, enabling seamless integration with various devices such as laptops, Blu-ray players, and gaming consoles. The projector also supports network connectivity, allowing for easy remote control and management over a LAN connection, which is particularly useful in corporate and educational environments.

With a robust build quality and reliable performance, the Sanyo PDG-DHT8000L is designed for longevity and ease of use. Its user-friendly interface and intuitive control features make operation straightforward, while its robust cooling system ensures efficient performance even during long presentations. Overall, the Sanyo PDG-DHT8000L is a powerful tool that delivers exceptional visual quality and versatility, making it an excellent choice for professionals seeking a reliable projection solution.
Top Page Image Contents