Hitachi cp-s318 Other Care, Caring for the inside of the projector, Caring for the lens

Page 30

OTHER CARE

CP-S317/327W/最終03.5.27 2:22 PM ページ 29

OTHER CARE

Caring for the inside of the projector :

In order to ensure the safe use of your projector, please have it cleaned and inspected by your local dealer about once every 2 years. Never try to care for the inside of the unit yourself. Doing so is dangerous.

Caring for the lens :

Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens directly with your hand.

Caring for the cabinet and remote control transmitter :

Wipe lightly with gauze or a soft cloth. If soiling is severe, dip a soft cloth in water or a neutral cleanser diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.

ATTENTION • Make sure to turn off the power and unplug the power cord before caring for the unit. Please carefully read "Safety Instructions" in this manual, in order to care for your projector correctly.

•Do not use cleaners or chemicals other than those listed above, including benzene and paint thinner.

•Do not use aerosols or sprays.

•Do not polish or wipe with hard objects.

29

Image 30

Contents BRUKERHÅNDBOK Vol.1 Grunnleggende CP-S318W/CP-X328WMANUALE DISTRUZIONI Vol.1 Informazioni di base ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS NORSK PORTGÊSCONNECTING CONTENTSSETTING UP USING THE REMOTEKeystone Distortion Correction PROJECTOR FEATURESUltra High Brightness Partial Magnification Function8 ～ 3 Connect the power cordConnect your devices to the projector Insert the batteries into the remotePART NAMES THE PROJECTORTHE REMOTE CONTROL Press and hold in the elevator 1 buttons SETTING UP THE PROJECTORAdjusting the Projectors Elevator Feet Raise or lower the projector to theAdjusting the Screen Size and Projection Distance If 43 aspect ratioIf 169 aspect ratio CONNECTING YOUR DEVICES Indicates the corresponding reference pagePorts and Cables NOTE About Plug-and-Play CapabilityLaptop computer CONNECTING YOUR DEVICES continuedConnecting to a Computer Desktop computerDVD player Connecting to a DVD PlayerConnecting to a VCR If using a componentConnecting to a Display Monitor Display monitorRGB OUT RGB IN Operating the remote control USING THE REMOTE CONTROLPutting batteries into the remote control unit 3 Closecover the batteryMake sure that the power cord is firmly and TURNING ON THE POWERPrecautions Turn on the projectors powerUsing the projectors control panel Press the INPUT button Selecting an Input SignalUsing the remote control If selecting RGB input Press the RGB button Use the zoom ring to adjust thecontrol panel or remote control TURNING OFF THE POWERpanel or remote control Check that the POWER indicator stopsbuttons to adjust ADJUSTING THE VOLUMEPress the VOLUME button the volumeUse the ADJUSTING THE POSITION1 Press the POSITION button the positionAutomatic Adjustment for Video Input USING THE AUTOMATIC ADJUSTMENT FEATUREAutomatic Adjustment for RGB Input Press the AUTO buttonbuttons to select the CORRECTING KEYSTONE DISTORTIONSPress the KEYSTONE button direction of distortion to correctPress the MAGNIFY ON button USING THE MAGNIFY FEATUREFREEZING THE SCREEN press the POSITION button again to confirm yourTEMPORARILY BLANKING THE SCREEN SIGNAL SEARCHINGSELECTING THE ASPECT RATIO 1 Press the SEARCH buttonSelect an item using the USING THE MENU FUNCTIONS2 Select a menu using the buttons to adjust the levelPS/2, ADB, Serial Mouse Control You can use the remote control as a simplified mouse or keyboardOPERATING THE PC SCREEN USB Mouse/Keyboard ControlTHE LAMP THE LAMP continued Replacing the lampto clean the air filter Turn off the projector, and unplug the power cordApply a vacuum cleaner to Turn on the projector, and use the menu to reset the filterfilter timer Turn off the projector, and unplug the power cord. Prepare aTurn on the projector power, and using the menu, reset the THE AIR FILTER continuedCaring for the inside of the projector Caring for the cabinet and remote control transmitterOTHER CARE Caring for the lensCP-S317/327W/Vol2-E責了 03.5.27 230 PM ページ MULTIFUNCTIONAL SETTINGS MAIN MenuMAIN Menu PICTURE1 Menu PICTURE 1 MenuPICTURE 2 Menu PICTURE2 MenuMULTIFUNCTIONAL SETTINGS continued INPUT MenuINPUT Menu SCREEN Menu SCREEN MenuOPTION Menu OPTION MenuRelated Messages WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURREDThe green lamp is lighted Regarding the Indicator LampsFlashing of the green lamp Flashing of the orange lampWHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED continued Phenomena That May Easily Be Mistaken for Machine DefectsSPECIFICATIONS Dimension DiagramSpecification WARRANTY AND AFTER-SERVICE SIGNAL CONNECTOR PIN ASSIGNMENT TECHNICALCP-S318/328W/TECHNICAl責了 03.5.27 239 PM ページ Signal mode EXAMPLE OF COMPUTER SIGNALResolution fH kHzINITIAL SET SIGNALS The following signals are used for the initial settingsUSB Mouse CONNECTION TO THE MOUSE CONTROLADB Mouse PS/2 MouseCommand data chart Communications setting3 Command data RS-232C COMMUNICATIONUsing the projector default settings Reset Command Requesting projector status Get commandChanging the projector settings Set command Increasing the projector setting value Increment commandCommand data chart Command data chart continued Contrast DefaultH.Phase KeystoneHCommand data chart continued For the Customers in CANADA REGULATORY NOTICESFCC Statement Warning Pour les utilisateurs au CanadaQR57451