Hitachi cp-s318 user manual PICTURE 1 Menu, PICTURE 2 Menu, PICTURE1 Menu, PICTURE2 Menu

CP-S317/327W/Vol2-E責了03.5.27 2:30 PM ページ 3

PICTURE 1 Menu

With the PICTURE 1 menu, the five items shown in the Table below can be performed.

Perform each operation in accordance with the instructions in the Table.

MENU

MAIN	COLOR BAL R
PICTURE-1	COLOR BAL B
PICTURE-2	SHARPNESS
INPUT	COLOR
SCREEN	TINT
OPTION

12

: SELECT

Example : PICTURE1 Menu

(COLOR BAL R)

PICTURE1 Menu

Item			Description
COLOR BAL R	Adjust Red Color Balance: Dark			⇔	Light
COLOR BAL B	Adjust Blue Color Balance: Dark			⇔	Light
SHARPNESS	Adjust Sharpness (for VIDEO/S-VIDEO): Clear					⇔	Soft
COLOR	Adjust COLOR (for VIDEO/S-VIDEO/COMPONENT VIDEO):
	Dark	⇔	Light
TINT	Adjust Tint (for VIDEO/S-VIDEO):			Green	⇔	Red

PICTURE 2 Menu

With the PICTURE 2 menu, the five items shown in the Table below can be performed.

Perform each operation in accordance with the instructions in the Table.

MENU

MAIN	V POSITION
PICTURE-1	H POSITION
PICTURE-2	H PHASE
INPUT	H SIZE
SCREEN	OVER SCAN
OPTION

12

: SELECT

Example : PICTURE2 Menu

(V POSITION)

PICTURE2 Menu

Item				Description
V POSITION	Adjust Vertical Position (for RGB):				Up	⇔	Down
H POSITION	Adjust Horizontal Position (for RGB): Left					⇔	Right
	Adjust Horizontal Phase (for RGB/COMPONENT VIDEO):
H PHASE	Right	⇔	Left
	• Adjust to eliminate flicker.
H SIZE	Adjust Horizontal Size (for RGB):				Large	⇔	Small
	• If the horizontal size adjustment is excessive, the image may not be displayed
	correctly. In such a case, initialize H SIZE with the RESET button.
	Select Over-scan Ratio (for VIDEO/S-VIDEO/COMPONENT VIDEO):
OVER SCAN	LARGE	⇔	MIDDLE	⇔	SMALL
	• It is recommended to select SMALL to avoid flicker at the lower part of the
	picture.

3