Hitachi US7070447-001 manual Console Port Pin Assignments, Pins Signal Name

Draft Level—Hitachi Confidential

HiSpeed Switch Troubleshooting Guide

Console Port

The console port has a DB-9 male connector used to connect a management terminal to the switch by means of a straight-through DB-9 to DB-9 standard serial port cable. Using a terminal, you can monitor the results of startup self-diagnostics, perform manual boot configuration and SNMP agent configuration, and customize your network using the supplied menus and screens.

The pin assignments for the console port are provided in Table 4-2.

Table 4-2. Console Port Pin Assignments

Pins Signal Name

1Not Used

2Transmit data (TD) to terminal

3Receive data (RD) from terminal

4Not used

5Common signal ground

6Not used

7Not used

8Not used

9Not used

The console port provides VT100 terminal emulation with the following parameter settings:

❒Baud Rate: 9600

❒Data bits: 8

❒Stop bit: 1

❒Parity: None

❒Flow Control: None

Use the CLI commands

CONSOLE/SHOW

CONSOLE/CONFIG

4-4 US7070447-001, Rev 01