Hitachi CP-X1200 user manual Connecting The Power Supply, MonitorProjector

Setting Up (continued)

Connecting to a monitor

MonitorProjector

L

RGB in RGB cable RGB OUT

				CONTROL	NETWORK
AUDIO IN1			REMOTE CONTROL
		L AUDIO OUT
AUDIO IN2				Y
RGB		RGB OUT	CR/PR Ca/Pa
R/CR/PR G/Y B/CB/PB	H	V
			R-AUDIO IN-L	VIDEO S-VIDEO

BNC

Connecting to a speaker (with amplifier)

SpeakerProjector

M

Audio in Stereo Mini cable AUDIO OUT

					CONTROL	NETWORK
AUDIO IN1				REMOTE CONTROL
				AUDIO OUT
AUDIO IN2	RGB		RGB OUT	M CR/PR Ca/Pa	Y
R/CR/PR G/Y	B/CB/PB	H	V
				R-AUDIO IN-L	VIDEO S-VIDEO

BNC

Connecting The Power Supply

WARNING • Use extra caution when connecting the power cord as incorrect or faulty connections may result in fire and/or electrical shock. Please adhere to the “User’s manual –

Safety Guide” and the following.

•Only plug the power cord into outlets rated for use with the power cord’s specified voltage range.

•Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one.

•Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug.

•Make sure that you firmly connect the power cord to the projector and wall outlet.

1	Connect the connector of the power cord to
	the AC inlet of the projector.
2	outlet.Firmly plug the power cord’s plug into the
	AC Inlet	Outlet
	Connector	Plug

11