Setting up
Connecting power supply
At first, make sure that the power switch of the projector is set to OFF position (marked “O”).
1. Put the connector of the power cord into the AC IN (AC inlet) of the projector.
2. Firmlyoutlet. plug the power cord’s plug into the
AC IN | Power cord |
WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock.
•Only use the power cord that came with the projector. If it is damaged, consult your dealer to get a new one.
•Only plug the power cord into an outlet whose voltage is matched to the power cord. The power outlet should be close to the projector and easily accessible. Remove the power cord for complete separation.
•Never modify the power cord.
Using the security bar and slot
A commercial
Also this product has the security slot for the Kensington lock.
For details, see the manual of the security tool.
Security slot
Security bar
WARNING ►Do not use the security bar and slot to prevent the projector from falling down, since it is not designed for it.
CAUTION ►Do not place
NOTE • The security bar and slot is not comprehensive theft prevention measures. It is intended to be used as supplemental theft prevention measure.
12