Hitachi CP-X206, CP-X306 Replacing the internal clock battery, Hitachi MAXELL, part number CR2032

Page 64

Maintenance

Replacing the internal clock battery

This projector has internal clock that uses a battery. When the clock of the network function does not work correctly, please try solution by replacement of the battery:

HITACHI MAXELL, part number CR2032.

1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.

2. After making sure that the projector has cooled adequately, pull the slot cover forward, pushing slightly

its edge up, and remove it from the projector.

3. Remove the battery case.

Hold the battery case gutter by finger nail or other thing and pull out the battery case slowly from the battery slot. While the projector is installed upside down, such as a ceiling mount, please remember the battery will drop down as soon as pulling the battery case out.

4. Take the old battery out from the battery case.

5. Replace a new battery.

Put a new battery into battery case. Please make sure that the + is facing upward. Insert the battery case slowly into the battery slot until you hear the snap.

6. Close the slot cover.

Replace the slot cover by reversing the procedure used when removing the cover.

Slot Cover

Battery Slot

Battery Case

Battery

Battery

Case

Battery (+)

Battery

Case

Battery (-)

NOTE • The internal clock will be initialized by removing the battery. For setting the clock, see the User's Manual - Network Guide.

WARNING ►Be careful of handling a battery, as a battery can cause explosion, cracking or leakage, which could result in a fi re, an injury, and environment pollution.

•Use only the specified and perfect battery. Do not use a battery with damage, such as a scratch, a dent, rust or leakage.

•When a battery leaked, wipe the leakage out well with a waste cloth. If the leakage adhered to your body, immediately rinse it well with water. When a battery leaked in the battery holder, replace the batteries after wiping the leakage out.

•Make sure the plus and minus terminals are correctly aligned when loading a battery.

•Do not work on a battery; for example recharging or soldering.

•Keep a battery in a dark, cool and dry place. Never expose a battery to a fire or water.

•Keep a battery away from children and pets.

•Obey the local laws on disposing a battery.

64

Page 63 Page 65
Image 64
Page 63 Page 65
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Contents Contents of package Fastening the lens coverProjector Part namesHOT Rear panel &10 Control panelComponent Remote control Setting up ArrangementCP-X206 On a horizontal surface Suspended from the ceilingArrangement CP-X306Arrangement Connecting your devices To connect themMonitor SpeakersConnecting your devices About Plug-and-Play capabilityConnecting power supply Using the security bar and slotInstalling the batteries Remote controlAbout the remote control signal Changing the frequency of remote control signal Using as a simple PC mouse & keyboardPower on/off Turning on the powerTurning off the power STANDBY/ON button Power indicatorAdjusting the volume Selecting an input signalOperating Temporarily muting the soundSearching an input signal Selecting an input signal For a computer signal  For no signalAdjusting the projectors elevator Adjusting the zoom and focusUsing the automatic adjustment feature Adjusting the position For a video signal and s-video signal  For a component video signalUsing the magnify feature Correcting the keystone distortionsKeystone button MagnifyFreezing the screen Temporarily blanking the screenFreeze button Blank buttonUsing the menu function Reset buttonEasy Menu Input button Enter buttonUsing the menu function Advanced MenuPicture Mode AspectAuto KeystoneEasy Menu Picture menu GammaPicture menu DescriptionMY Memory LOAD-1, LOAD-2, LOAD-3, LOAD-4SAVE-1, SAVE-2, SAVE-3, SAVE-4 For a computer signal For no signalImage menu Over ScanPhase Auto AdjustImage menu SizeInput menu ProgressiveVideo NR Color SpaceInput menu Video FormatFrame Lock ComputerResolution StandardSetup menu Standby Mode Setup menuMonitor OUT Volume Audio menuSpeaker AudioScreen menu BlankStart UP Screen menuMyScreen Capturing error has occurred. Please try again MyScreen registration is finishedMyScreen Lock MessageSource Name TemplateAuto Search Option menuAuto on Auto OFF Option menuLamp Time MY Button ServiceMY Source FAN Speed Service GhostFilter Message Service Information Factory ResetKEY Lock Remote FreqUsing Security Features Inputting the PasswordChanging the Password SecurityUsing the MyScreen Password Function If you have forgotten your PasswordTurning on the MyScreen Password Function Setting the PasswordUsing the PIN Lock Function Turning the Password offDescription Security Registering the PIN CodeTurning Off the PIN Lock Function If you have forgotten your PIN CodeSetting the Transition Detector Password Using the Transition Detector FunctionTurning On the Transition Detector Function Setting the Transition Detector off Writing the MY Text Using the MY Text Password functionDisplaying the MY Text Description Turning on the MY Text Password Setup Network MenuNetwork Menu Name ProjectorEnter or Input button MY Image To switch the image displayedTo return to the menu Information Closed Caption menu DisplayMode ChannelReplacing the lamp MaintenanceType number DT00841 Replacing the lamp Lamp warning Replacing the lampCleaning and replacing the air filter Type number MU05611Cleaning and replacing the air filter Replacing the internal clock battery Hitachi MAXELL, part number CR2032Caring for the cabinet and remote control Other careInside of the projector Caring for the lensTroubleshooting Related messagesRegarding the indicator lamps Resetting all settings Shutting the projector downElectrical power cord is not plugged Signal cables are not correctly connectedSignal source does not correctly work Input changeover settings are mismatchedVolume is adjusted to an extremely low level AUDIO/SPEAKER setting is not correctMute function is working Lens cover is attachedColor settings are not correctly adjusted Color Space setting is not suitableNot properly adjusted Whisper function is workingSpecification SpecificationsSpecification Specifications
Related manuals
Manual 73 pages 5.85 Kb

CP-X206, CP-X306 specifications

The Hitachi CP-X306 and CP-X206 projectors are designed to meet the needs of both educational and corporate environments, offering high-quality imaging, user-friendly features, and advanced technologies. These models stand out for their efficient performance and robust functionality, making them reliable tools for presentations and lectures.

The CP-X306 comes equipped with a brightness of up to 3,200 ANSI lumens, ensuring clear and vibrant images even in well-lit rooms. Its advanced LCD technology provides rich and accurate color reproduction, catering to various content types—from text to intricate graphics. The projector boasts a resolution of XGA (1024 x 768), making it suitable for most standard presentations without losing detail.

In contrast, the CP-X206, while slightly less bright with a maximum output of 2,500 ANSI lumens, still delivers impressive image quality. It shares the same XGA resolution, making it a cost-effective choice for users who require reliable performance without the highest brightness levels. Both models feature a contrast ratio of 500:1, which enhances the clarity of images, ensuring deep blacks and vibrant colors.

One of the key features present in both projectors is their lightweight and compact design, facilitating easy transport between various settings. This portability is vital for educators and business professionals who frequently move from room to room or travel for presentations. The projectors are equipped with a built-in speaker, allowing for audio playback without the need for external speakers, simplifying setup.

Another notable characteristic is the easy connectivity options offered by both models. They come equipped with multiple input ports, including HDMI, which supports the latest digital devices. Additionally, they have USB ports for direct PC-less presentations, along with standard VGA inputs that accommodate older devices.

User-friendly functionalities such as an automatic vertical keystone correction help ensure that images are perfectly aligned, even in less-than-ideal installation conditions. The projectors also come with an eco-friendly mode that reduces power consumption and extends lamp life, making them an economical choice for long-term use.

In summary, both the Hitachi CP-X306 and CP-X206 projectors deliver reliable performance, high-quality imaging, and user-friendly features that cater to the demands of educational and professional environments. Their portability, connectivity options, and eco-conscious designs make them excellent choices for anyone looking to enhance their presentation experience.
Top Page Image Contents