IMAGE menu
IMAGE menu (continued)
Item
Description
| Using the ▲/▼ buttons adjusts the horizontal position. | |
| Left ó Right | |
| • | |
| on the screen. If this occurs, please reset the horizontal position to | |
H POSITION | the default setting. Pressing RESET button when H POSITION is | |
| selected will reset H POSITION to the default setting. | |
| • When this function is performed on a video signal, | |
| or component video signal, the range of this adjustment depends on | |
| OVER SCAN (29) setting. It is not possible to adjust when OVER | |
| SCAN is set to 10. | |
| Using the ▲/▼ buttons adjusts the horizontal phase to eliminate flicker. | |
H PHASE | Right ó Left | |
• This item can be selected only for a computer signal or component | ||
| ||
| video signal. | |
| Using the ▲/▼ buttons adjusts the horizontal size. | |
| Large ó Small | |
H SIZE | • This item can be selected only for a computer signal. | |
| • When this adjustment is excessive, the picture may not be | |
| displayed correctly. In such a case, please reset the adjustment by | |
| pressing the RESET button during this operation. | |
| Executing this item performs the automatic adjustment feature. | |
| For a computer signal | |
| The vertical position, the horizontal position and the horizontal phase (44) | |
| will be automatically adjusted. Make sure that the application window is set | |
| to its maximum size prior to attempting to use this feature. A dark picture may | |
| still be incorrectly adjusted. Use a bright picture when adjusting. | |
| For a video signal and | |
| The video format best suited for the respective input signal will | |
| be selected automatically. This function is available only when | |
| the AUTO is selected for the VIDEO FORMAT item in the INPUT | |
AUTO ADJUST | menu (32). The vertical position and horizontal position will be | |
EXECUTE | automatically set to the default. | |
| For a component video signal | |
| The vertical position, horizontal position and horizontal phase will | |
| be automatically set to the default. | |
| • The automatic adjustment operation requires approx. 10 seconds. | |
| Also please note that it may not function correctly with some input. | |
| When this function is performed for a video signal, a certain extra | |
| such as a line may appear outside a picture. | |
| • The items adjusted by this function may vary when the FINE or | |
| DISABLE is selected for the AUTO ADJUST item of the SERVICE | |
| item in the OPTION menu (44). |
30