Maintenance
Maintenance
Replacing the lamp
A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, make contact with your dealer and tell the lamp type number.
Type number : DT00841
Replacing the lamp
lamp cover
1. Turn the projector off, and unplug the power cord. Allow the projector to cool for at least 45 minutes.
2. Prepare a new lamp. If the projector is mounted on a ceiling, or if the lamp has broken, also ask the dealer to replace the lamp.
In case of replacement by yourself, follow the following procedure.
3.
4.
5. | Insert the new lamp, and retighten firmly the |
|
2 screws of the lamp that are loosened in the | Handles | |
| previous process to lock it in place. | |
|
|
6.
7. Turn the projector on and reset the lamp time using the LAMP TIME item in the OPTION menu.
(1) Press the MENU button to display a menu.
(2) Point at the Go to Advanced Menu … in the menu using the ▼/▲ button, then press the ► button.
(3)Point at the OPTION in the left column of the menu using the ▼/▲button, then press the ► button.
(4)Point at the LAMP TIME using the ▼/▲ button, then press the ► button. A dialog will appear.
(5)Press the ▲ button to select RESET on the dialog. It performs resetting the lamp time.
CAUTION ►Do not touch any inner space of the projector, while the lamp is taken out.
NOTE • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.
60