PICTURE menu
PICTURE menu
From the PICTURE menu, items shown in the table below can be performed.
Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
Item | Description | |
|
| |
BRIGHTNESS | Using the ▲/▼ buttons adjusts the brightness. | |
Light ó Dark | ||
| ||
CONTRAST | Using the ▲/▼ buttons adjusts the contrast. | |
Strong ó Weak | ||
| ||
| Using the ▲/▼ buttons switches the gamma mode. |
#1 DEFAULT � #1 CUSTOM � #2 DEFAULT � #2 CUSTOM
� | � |
#6 CUSTOM | #3 DEFAULT |
� | � |
#6 DEFAULT | #3 CUSTOM |
� | � |
#5 CUSTOM � #5 DEFAULT � #4 CUSTOM � #4 DEFAULT
| To adjust CUSTOM |
|
| Selecting a mode whose name includes | |
| CUSTOM and then pressing the ► button | |
| or the ENTER button displays a dialog to | |
| aid you in adjusting the mode. | |
| This function is useful when you want to | |
| change the brightness of particular tones. | |
GAMMA | Choose an item using the ◄/► buttons, and | |
| adjust the level using the ▲/▼ buttons. | |
| You can display a test pattern for checking the effect of your | |
| adjustment by pressing the ENTER button. | |
| Each time you press the ENTER button, the pattern changes as | |
| below. | |
| No pattern ð Gray scale of 9 steps | |
| Ramp Gray scale of 15 steps | |
| The eight equalizing bars correspond to eight tone levels of the test | |
| pattern (Gray scale of 9 steps), except the darkest in the left end. | |
| If you want to adjust the 2nd tone from left end on the test pattern, | |
| use the equalizing adjustment bar “1”. The darkest tone at the left | |
| end of the test pattern cannot be controlled with any of equalizing | |
| adjustment bar. |
•When this function is performed, lines or other distortion may appear. (continued on next page)
26