Hitachi 32PD5000, 42PD5000 Remote control, Loading Batteries, Handling the Remote Control

Page 11

Remote control

POWER OFF button 13

POWER ON button 13

MUTE button 14

RGB/VIDEO buttons 14

PinP button 34

AUTO button 16

MENU button 16

OK button 16

ID button 16

 

 

 

VOL

RGB 1

RGB 2

MUTE

VOL

AV1

AV2

AV3

AV4

AUTO PinP SIZE RECALL

MENU

OK

ID

ID SET

13POWER ON/OFF button

14VOLUME UP/DOWN buttons

15SIZE button

15RECALL button

16RETURN button

16SELECT/ADJUST buttons

16ID SET button

ENGLISH

Loading Batteries

1. Open the battery cover.

• Slide back and remove the battery cover in the direction of the arrow.

2.Load batteries.

•Load two Size AA batteries included observing the correct polarities.

3.Close the battery cover.

•Replace the battery cover in the direction of the arrow and snap it back into place.

Handling the Remote Control

Use the remote control within about 5 m from front of the unit’s remote-control sensor and within 30 degrees on both sides.

With in 30

With in 30 degrees degrees

About 3m

About 3m

About 5m

CAUTION

•Do not use new and old batteries together. The batteries could explode or leak, resulting in fires, physical injury, or stains.

•When loading batteries, observe their correct polarities as marked on the product. If loaded in the wrong direction, the batteries could explode or leak, resulting in fires, physical injury, or stains.

ATTENTION

•Do not drop or impact the remote control.

•Do not splash the remote control with water or put it on a wet object to avoid possible failures.

•Before leaving the remote control out of use for an extended period of time, remove the batteries from it.

•If the remote control begins to lack responsiveness, replace the batteries.

•Strong light such as direct sunlight impinging on the photoreceptor of the remote control can cause operational failure. Position this unit to avoid direct contact with such light.

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 32PD5000 42PD5000 42PMA500 Remarque English Features Contents About the Symbols Safety InstructionsTo Earth Fuse Blue to Neutral Cord Clamp Be cautious of the power cord connectionBe sure to keep safety ground connection Be careful in handling the battery of the remote controlSafety Instructions Set the sound volume at a suitable level Precautions for the cable connectionPrecaution during transportation Do not physically impact the remote controlMain Unit Component NamesLoading Batteries Remote controlHandling the Remote Control Securing to a wall or pillar Installation InstructionsInstallation Anti-tumble measuresMonitor rear panel Connecting to a PCPage Operating Instructions Turning Power On and OffAudio Mute Operating Instructions Volume AdjustmentInput Switching When a button is pressed, the volume adjustmentDisplay area selection diagram RGB input Size SwitchingInput Signal Screen Display Independent Operation of Multiple Monitors ID No Using the Menu Screen On-screen display systemAutomatic Adjustment of Screen Position and the Clock Operating InstructionsPicture Menu Selected characters Timer MenuOff Timer Min 30Min 60Min 120Min 90Min On Timer Audio MenuFunction Menu Movie Setup MenuMenu Display Registration condition Other FeaturesLanguage Menu Automatic StoreStatus Display Action Other Features Signal CheckPower Save Mode When the RGB, RGB2 input is selectedAbout residual images Image Retention of Plasma DisplayMethods to Reduce the Occurrence of Image Retention About screen defectsCheck the way the signal cable is connected TroubleshootingSymptoms That Seemingly Appear to be Failures Symptom Point to checkEnglish Example Troubleshooting Actions to Correct Abnormal DisplaysPin Input signal Product SpecificationsSignal Input RGB terminal D-sub 15-pin connectorPin Input signal Product Specifications Signal InputRecommended Signal List With Digital RGB signal input RGB1 inputWith Analog RGB signal input RGB2 input Supplement Optional Video Unit Function Connecting to a Video Imaging DeviceAn example of connecting video imaging devices With DVI-STB and RGB component setupAV1 AV2 AV3 RGB2 RGB1 AV4 Display size selection diagramWhen you want to Input signal Display screen RemarksPosition + Using a wide-screen monitorTime will display 2 pictures Operating Instructions Displaying Multi PicturePictures Split YNR Black Enhancement Auto Colour Film Mode PAL Comb FilterOperating Instructions Picture Menu Yellow Colour ManagementMagenta RedAV2 1st step AV2 2nd step System Colour SystemVideo Input RGB2 2nd step Audio InputScart Output RGB2 1st stepVideo input Pin Input connector pin specificationsScart connector pin specifications Pin SignalKHz MHz Product Specifications Recommended Signal ListWith R, G, B Video input AV2 and AV4 input With component input AV1, AV2 and RGB2-component inputOptional Tuner Unit Function Remote control provided for the optional tuner unitPressing this button. Each time pressed You may recall the picture mode byPicture mode is changed in following Press this button to change input Surround On or Off ModeButtons for Teletext Mode Monitor rear panel Connecting AntennaPrecautions when connecting the antenna Auto Full Zoom 149Zoom C149L During TV modeTV AV1 AV2 AV3 RGB2 RGB1 AV4 Select buttons Activating the Split mode from the TV screenMulti Picture button Multi Mode button Button Pictures Split 4 pictures 12 picturesDisplay will go out in approximately 6 seconds TV position Sound modeOff-timer PicturesSplit Strobe Picture FreezingFreeze button Abcde During TV modeAuto Off Operating Instructions Setup MenuDuring Video signal input Stereo sound broadcast Other FunctionsA2 / Nicam / Sound Multiplex Bilingual / Dual sound broadcastExample Mode button Index button TV / Text button Cancel buttonOperating Instructions Other Functions DVD Player SelectionIntermittent interference Symptom Possible reason RemedySnowy picture poor sound Multiple images sound O.KRF input Input signals Input terminals Parts for CL37-PD2100 only To dealers and shopsParts packing Forbidden General Required general Disassembly ProhibitedGeneral Locations where there Installation on a wooden wallInstallation on a concrete wall Do not installWall-mount metal M6 x 18 screw x Cutout Wall-mount metal topCenter BottomMounting the wall-mount unit on the wall Remove the 4 screws Remove the screws CL37-PD2100 Stand Installing the TV-mount metalsWire clamps Remove the stand2nd TV-mount metal hole 5th TV-mount metal hole TV-mount metal M6 x 18 screwsM6 x 18 screws Bracket 1st TV-mount Metal hole Main material External DimensionsAngle adjustment MassModel Serial Number DEALER/STORE Date Purchased Hitachi Atago Building
Related manuals
Manual 76 pages 6.24 Kb

42PD5000, 42PMA500, 32PD5000 specifications

The Hitachi 42PD5000 is a notable plasma television model that garnered attention during its release in the mid-2000s. Known for its impressive display technology and sleek design, this model marked a significant point in the evolution of home entertainment systems, making it a popular choice among enthusiasts.

One of the standout features of the Hitachi 42PD5000 is its 42-inch screen, which offers expansive viewing space that enhances the home cinema experience. With a resolution of 1024 x 768 pixels, it provides clear and vibrant image quality, sharp enough to display intricate details in films and television shows. The plasma panel technology delivers deeper blacks, vibrant colors, and superior contrast ratios compared to traditional LCD televisions available at the time, making it an attractive option for media consumption.

Another significant technology employed in the Hitachi 42PD5000 is the use of progressive scan capabilities. This technology allows for smoother images during fast-motion scenes, which is particularly beneficial for sports enthusiasts and action movie fans. The responsiveness and fluidity in action sequences elevate viewing experiences, making it a desirable feature for many users.

In terms of connectivity, the Hitachi 42PD5000 is equipped with various input options, including HDMI ports, component video inputs, and standard AV inputs. This connectivity allows users to connect a multitude of devices, from DVD players to gaming consoles and other high-definition sources. The inclusion of built-in speakers offers decent audio quality, complementing the visual experience without the immediate need for external audio systems.

Design-wise, the Hitachi 42PD5000 strikes a balance between aesthetic appeal and functionality. Its sleek frame and minimalist design make it suitable for various interior styles, enhancing the overall decor of a room. Moreover, the relatively lightweight nature of plasma technology allows for easier installation and wall-mounting options.

In conclusion, the Hitachi 42PD5000 remains a memorable model in the history of plasma televisions due to its commendable features, including its vibrant display, progressive scan technology, and versatile connectivity options. Although newer technologies have emerged, the 42PD5000 still holds a place in the evolution of home entertainment systems, offering a glimpse into the transitional period of television technology. Its combination of image quality, design, and performance makes it a noteworthy choice for those looking back at earlier advancements in the realm of television.
Top Page Image Contents