Hitachi 32PD5000, 42PD5000 To dealers and shops, Parts packing, Parts for CL37-PD2100 only

Page 59

Hitachi Plasma TV Horizontal Wall-mount Unit

Model

 

PWT001

Installation Instructions

Thank you for purchasing the Hitachi Plasma TV Wall-mount Unit.

To ensure correct usage, please read this instruction manual thoroughly. After reading, please store this manual in a safe place for future reference.

This plasma TV wall-mount unit is for use with the following models:

HITACHI Plasma TV CL32-PD2100, CL37-PD2100, CL42-PD2100, 32PD5100, 42PD5100, 42PMA500

32PD5000, 32PD5200, 32PD5300, 37PD5200, 42PD5000, 42PD5200, 42PD5300, CMP4211/2, CMP4213/4

Special techniques are necessary for installation of the plasma TV.

Do not attempt to perform this work by yourself.

Request an installation specialist to install this unit.

This company assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.

Please remember that if you remove the plasma TV set from the wall later, you will find the screw holes and anchor bolts for the mounting unit left on the wall. Also note that a long use of the plasma TV set may discolor the wall around it due to its heat and air flow.

To dealers and shops

To ensure customer safety, be sure to design the installation location so that the strength is sufficient to withstand the weight of both the plasma TV and the wall-mount unit.

Always use at least two persons for all installations.

Fully tighten all of the mounting screws as specified in the installation instructions.

Parts Configuration Chart

 

In the parts packing

Wall-mount metal

 

 

(top) x 1

 

 

TV-mount metal

M6 x 18 screw

M5 - 6 flat washer

x 10

x 8

x 2

 

 

Wall-mount metal

 

 

(center) x 1

 

 

 

Wire clamp

 

 

x 2

 

 

Parts for CL37-PD2100 only

Wall-mount metal

Bracket (R),(L)

M6 x 18 screw

(bottom) x 1

x 1 each

x 4

Image 59
Contents 32PD5000 42PD5000 42PMA500 Remarque English Features Contents About the Symbols Safety InstructionsTo Earth Fuse Blue to Neutral Cord Clamp Be cautious of the power cord connectionBe sure to keep safety ground connection Be careful in handling the battery of the remote controlSafety Instructions Set the sound volume at a suitable level Precautions for the cable connectionPrecaution during transportation Do not physically impact the remote controlMain Unit Component NamesLoading Batteries Remote controlHandling the Remote Control Securing to a wall or pillar Installation InstructionsInstallation Anti-tumble measuresMonitor rear panel Connecting to a PCPage Operating Instructions Turning Power On and OffAudio Mute Operating Instructions Volume AdjustmentInput Switching When a button is pressed, the volume adjustmentDisplay area selection diagram RGB input Size SwitchingInput Signal Screen Display Independent Operation of Multiple Monitors ID No Using the Menu Screen On-screen display systemAutomatic Adjustment of Screen Position and the Clock Operating InstructionsPicture Menu Selected characters Timer MenuOff Timer Min 30Min 60Min 120Min 90Min On Timer Audio MenuFunction Menu Movie Setup MenuMenu Display Registration condition Other FeaturesLanguage Menu Automatic StoreStatus Display Action Other Features Signal CheckPower Save Mode When the RGB, RGB2 input is selectedAbout residual images Image Retention of Plasma DisplayMethods to Reduce the Occurrence of Image Retention About screen defectsCheck the way the signal cable is connected TroubleshootingSymptoms That Seemingly Appear to be Failures Symptom Point to checkEnglish Example Troubleshooting Actions to Correct Abnormal DisplaysPin Input signal Product SpecificationsSignal Input RGB terminal D-sub 15-pin connectorPin Input signal Product Specifications Signal InputRecommended Signal List With Digital RGB signal input RGB1 inputWith Analog RGB signal input RGB2 input Supplement Optional Video Unit Function Connecting to a Video Imaging DeviceAn example of connecting video imaging devices With DVI-STB and RGB component setupAV1 AV2 AV3 RGB2 RGB1 AV4 Display size selection diagramWhen you want to Input signal Display screen RemarksPosition + Using a wide-screen monitorTime will display 2 pictures Operating Instructions Displaying Multi PicturePictures Split YNR Black Enhancement Auto Colour Film Mode PAL Comb FilterOperating Instructions Picture Menu Yellow Colour ManagementMagenta RedAV2 1st step AV2 2nd step System Colour SystemVideo Input RGB2 2nd step Audio InputScart Output RGB2 1st stepVideo input Pin Input connector pin specificationsScart connector pin specifications Pin SignalKHz MHz Product Specifications Recommended Signal ListWith R, G, B Video input AV2 and AV4 input With component input AV1, AV2 and RGB2-component inputOptional Tuner Unit Function Remote control provided for the optional tuner unitPressing this button. Each time pressed You may recall the picture mode byPicture mode is changed in following Press this button to change input Surround On or Off ModeButtons for Teletext Mode Monitor rear panel Connecting AntennaPrecautions when connecting the antenna Auto Full Zoom 149Zoom C149L During TV modeTV AV1 AV2 AV3 RGB2 RGB1 AV4 Select buttons Activating the Split mode from the TV screenMulti Picture button Multi Mode button Button Pictures Split 4 pictures 12 picturesDisplay will go out in approximately 6 seconds TV position Sound modeOff-timer PicturesSplit Strobe Picture FreezingFreeze button Abcde During TV modeAuto Off Operating Instructions Setup MenuDuring Video signal input Stereo sound broadcast Other FunctionsA2 / Nicam / Sound Multiplex Bilingual / Dual sound broadcastExample Mode button Index button TV / Text button Cancel buttonOperating Instructions Other Functions DVD Player SelectionIntermittent interference Symptom Possible reason RemedySnowy picture poor sound Multiple images sound O.KRF input Input signals Input terminals Parts for CL37-PD2100 only To dealers and shopsParts packing Forbidden General Required general Disassembly ProhibitedGeneral Locations where there Installation on a wooden wallInstallation on a concrete wall Do not installWall-mount metal M6 x 18 screw x Cutout Wall-mount metal topCenter BottomMounting the wall-mount unit on the wall Remove the 4 screws Remove the screws CL37-PD2100 Stand Installing the TV-mount metalsWire clamps Remove the stand2nd TV-mount metal hole 5th TV-mount metal hole TV-mount metal M6 x 18 screwsM6 x 18 screws Bracket 1st TV-mount Metal hole Main material External DimensionsAngle adjustment MassModel Serial Number DEALER/STORE Date Purchased Hitachi Atago Building
Related manuals
Manual 76 pages 6.24 Kb

42PD5000, 42PMA500, 32PD5000 specifications

The Hitachi 42PD5000 is a notable plasma television model that garnered attention during its release in the mid-2000s. Known for its impressive display technology and sleek design, this model marked a significant point in the evolution of home entertainment systems, making it a popular choice among enthusiasts.

One of the standout features of the Hitachi 42PD5000 is its 42-inch screen, which offers expansive viewing space that enhances the home cinema experience. With a resolution of 1024 x 768 pixels, it provides clear and vibrant image quality, sharp enough to display intricate details in films and television shows. The plasma panel technology delivers deeper blacks, vibrant colors, and superior contrast ratios compared to traditional LCD televisions available at the time, making it an attractive option for media consumption.

Another significant technology employed in the Hitachi 42PD5000 is the use of progressive scan capabilities. This technology allows for smoother images during fast-motion scenes, which is particularly beneficial for sports enthusiasts and action movie fans. The responsiveness and fluidity in action sequences elevate viewing experiences, making it a desirable feature for many users.

In terms of connectivity, the Hitachi 42PD5000 is equipped with various input options, including HDMI ports, component video inputs, and standard AV inputs. This connectivity allows users to connect a multitude of devices, from DVD players to gaming consoles and other high-definition sources. The inclusion of built-in speakers offers decent audio quality, complementing the visual experience without the immediate need for external audio systems.

Design-wise, the Hitachi 42PD5000 strikes a balance between aesthetic appeal and functionality. Its sleek frame and minimalist design make it suitable for various interior styles, enhancing the overall decor of a room. Moreover, the relatively lightweight nature of plasma technology allows for easier installation and wall-mounting options.

In conclusion, the Hitachi 42PD5000 remains a memorable model in the history of plasma televisions due to its commendable features, including its vibrant display, progressive scan technology, and versatile connectivity options. Although newer technologies have emerged, the 42PD5000 still holds a place in the evolution of home entertainment systems, offering a glimpse into the transitional period of television technology. Its combination of image quality, design, and performance makes it a noteworthy choice for those looking back at earlier advancements in the realm of television.