JBL DD66000 manual 1501AL Low Frequency Driver, 1501AL section view

Page 10

TRANSDUCERS

The 1501AL Low Frequency Driver

See Figure 2

The 1501A L Low Frequency driver is very similar to the 1500A L used in the S9800 system. It incorporates a new high impedance voice coil to allow a pair of woofers to be used while still maintaining an 8 ohm system impedance. The voice coil length has been increased to 30.5 mm (from 20.3 mm) and its milling width has been reduced slightly. This was done to allow greater clearance from the outer diameter of the coil to the laminated top plate and to provide a larger surface area of coil surface for heat dissipation. These coil improvements allow the 1501A L to handle up to 25% more power than the 1500A L.

Figure 2 – 1501AL section view

The 1500AL LF driver is a 380 mm diameter device with a 100 mm voice coil completely immersed in a radial field generated by an Alnico 5DG magnet. Alnico was chosen because of its stable operating point. This material is insensitive to temperature changes and back EMF from the coil. JBL has overcome the tendency of Alnico to demagnetize with high drive by utilizing a massive shorting ring at the base of the motor assembly. The top plate is constructed of alternating copper-steel laminations. The presence of the copper rings linearizes the magnetic properties of the gap to all but eliminate eddy current distortion.

The outer suspension is made of EPDM foamed rubber, which has the longevity and frequency response characteristics of traditional rubber surrounds, but with a low density very close to that of foam surrounds. Low loss EPDM material was chosen so that the transient detail of musical signals could be preserved. Dual inverted Nomex spiders are employed for the cancellation of

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Project Everest DD66000 Users Guide Table of Contents Chapter Defining the Project Concept Project Everest DD66000 Page Project Everest DD66000 Chapter Project Everest DD66000 1501AL Low Frequency Driver 1501AL section view476Be High Frequency Compression Driver and Horn 476Be section viewPage 045Be-1 Ultra-High Frequency Compression Driver and Horn 045Be-1 section viewInternal Crossover Network DD66000 system impedanceUnpacking the Project Everest DD66000 System Grille Removal Selecting Cable Amplifier Recommendations Placement and Set-up Considerations Floor Requirements Project Everest DD66000 Switch Operations System OrientationHF Drive / LF Drive HF Level LF LevelBattery Installation Project Everest DD66000 Project Everest DD66000 Connections II. Bi-Wire Connecting Method Passive Connecting MethodIII. Bi-Amp Connecting Method Final Checklist Project Everest DD66000 Care and Maintenance Troubleshooting and Service Guide Project Everest DD66000 Register Project Everest DD66000 System Specifications JBL and Harman International USA

DD66000 specifications

The JBL DD66000 is a flagship model in the world of high-fidelity loudspeakers, designed to deliver an exceptional listening experience for audiophiles and music enthusiasts alike. With its rich heritage rooted in decades of acoustic engineering expertise, the DD66000 represents the pinnacle of JBL's commitment to superior audio performance.

One of the standout features of the DD66000 is its innovative three-way speaker configuration. This includes a 15-inch bass driver, a 4-inch midrange driver, and a high-frequency compression driver that produces crystal-clear treble. This arrangement allows for a wide frequency response, ensuring that every note, from the lowest lows to the highest highs, is reproduced with remarkable accuracy and detail.

The DD66000 boasts advanced technologies that enhance its performance. The Integrated Waveguide Technology ensures that sound is evenly distributed throughout the listening space, creating a spacious and immersive soundstage. This technology minimizes distortion and ensures that the sound maintains its clarity, even at high volumes. Additionally, the dual high-frequency compression drivers provide extended dynamic range, allowing the speaker to handle both quiet and loud passages seamlessly.

Another key characteristic of the JBL DD66000 is its robust build quality. The speaker is encased in an elegantly crafted cabinet that not only minimizes resonance but also adds to its aesthetic appeal. The sleek design incorporates high-quality materials, giving it a premium look that complements any audio setup.

The DD66000 is also versatile in its connectivity options. Designed to work seamlessly with various audio components, it features compatibility with both analog and digital sources. Audiophiles can enjoy their favorite music in high-resolution formats, ensuring that every detail is captured and enjoyed.

In summary, the JBL DD66000 is a masterful integration of advanced technology and superior craftsmanship. With its three-way configuration, cutting-edge sound dispersion technology, and solid build quality, it stands out as a premier choice for serious listeners. Whether used in a dedicated home theater or a high-end audio setup, the DD66000 promises to deliver an unrivaled listening experience, making it a worthy investment for those who demand the best in audio fidelity.
Top Page Image Contents