JBL DD66000 manual HF Level, LF Level

Page 23

Project EVEREST DD66000

HF Level

This switch adjusts the attenuation applied to the 476Be (high frequency or HF unit) by approximately 0.5 dB over the range of 1,000 Hz to about 8,000 Hz. The action is accomplished by trimming the main attenuation resistors.

Mid-range sound becomes calm by reducing level and brighter by increasing level. No addit ional parts are inserted in the signal path and there is no sonic deterioration by position or adjustment functions .

LF Level

There is a level trim available for each of the two woofers (LF1 and LF2). Moving a bar from Low to High will increase the drive level to a portion of the frequency spectrum over which each woofer operates. LF1 refers to the low range woofer (up to 150 Hz) and will affect the output level in the range of 60Hz – 150Hz by about 0.5 dB. LF2 refers to the main woofer and will affect the output level in the range of 150 Hz to 700 Hz. The purpose of these adjustments is to allow fine-tuning of the mid -bass and midrange response of the system to better integrate with varying room characteristics.

Normally, the control bars of LF1/LF2 are moved together to get the maximum effect (LF1 & LF2 = High or LF1 & LF 2 = Low). Depending on room environment, you may get a good balance by moving of them. In case speaker systems are placed close to corners of the room and the distance between 2 systems are great and you notice bass boost by reflections from walls , try to increase the LF2 level and decrease LF2 level (LF1 = Low, LF2 = High). These adjustments will not cause loss of series element from adjustments they are done by change values of damp ing resisters which are in parallel.

Change from LF1 level trim

Change from LF2 level trim

Image 23
Contents Project Everest DD66000 Users Guide Table of Contents Chapter Defining the Project Concept Project Everest DD66000 Page Project Everest DD66000 Chapter Project Everest DD66000 1501AL section view 1501AL Low Frequency Driver476Be section view 476Be High Frequency Compression Driver and HornPage 045Be-1 section view 045Be-1 Ultra-High Frequency Compression Driver and HornDD66000 system impedance Internal Crossover NetworkUnpacking the Project Everest DD66000 System Grille Removal Selecting Cable Amplifier Recommendations Placement and Set-up Considerations Floor Requirements System Orientation Project Everest DD66000 Switch OperationsHF Drive / LF Drive LF Level HF LevelBattery Installation Project Everest DD66000 Project Everest DD66000 Connections III. Bi-Amp Connecting Method Passive Connecting MethodII. Bi-Wire Connecting Method Final Checklist Project Everest DD66000 Care and Maintenance Troubleshooting and Service Guide Project Everest DD66000 Register Project Everest DD66000 System Specifications USA JBL and Harman International

DD66000 specifications

The JBL DD66000 is a flagship model in the world of high-fidelity loudspeakers, designed to deliver an exceptional listening experience for audiophiles and music enthusiasts alike. With its rich heritage rooted in decades of acoustic engineering expertise, the DD66000 represents the pinnacle of JBL's commitment to superior audio performance.

One of the standout features of the DD66000 is its innovative three-way speaker configuration. This includes a 15-inch bass driver, a 4-inch midrange driver, and a high-frequency compression driver that produces crystal-clear treble. This arrangement allows for a wide frequency response, ensuring that every note, from the lowest lows to the highest highs, is reproduced with remarkable accuracy and detail.

The DD66000 boasts advanced technologies that enhance its performance. The Integrated Waveguide Technology ensures that sound is evenly distributed throughout the listening space, creating a spacious and immersive soundstage. This technology minimizes distortion and ensures that the sound maintains its clarity, even at high volumes. Additionally, the dual high-frequency compression drivers provide extended dynamic range, allowing the speaker to handle both quiet and loud passages seamlessly.

Another key characteristic of the JBL DD66000 is its robust build quality. The speaker is encased in an elegantly crafted cabinet that not only minimizes resonance but also adds to its aesthetic appeal. The sleek design incorporates high-quality materials, giving it a premium look that complements any audio setup.

The DD66000 is also versatile in its connectivity options. Designed to work seamlessly with various audio components, it features compatibility with both analog and digital sources. Audiophiles can enjoy their favorite music in high-resolution formats, ensuring that every detail is captured and enjoyed.

In summary, the JBL DD66000 is a masterful integration of advanced technology and superior craftsmanship. With its three-way configuration, cutting-edge sound dispersion technology, and solid build quality, it stands out as a premier choice for serious listeners. Whether used in a dedicated home theater or a high-end audio setup, the DD66000 promises to deliver an unrivaled listening experience, making it a worthy investment for those who demand the best in audio fidelity.