Project Everest DD66000 Connections

CHAPTER 9

Project EVEREST DD66000 Connections

Caution: Turn all amplifiers off before connecting or disconnecting Project EVEREST DD66000 loudspeakers. Making connections while an amplifier is operating could seriously damage the loudspeaker system and void the warranty. All amplifiers must also be turned off before connecting or disconnecting cables at the amplifier or preamplifier inputs.

All connections between the amplifier(s) and the Project EVEREST DD66000 loudspeaker system are made at the terminals located on the back of the enclosure. The left-hand terminals (black letters) are negative, and the right-hand terminals (red letters) are positive. These correspond to the negative and positive conductors in the speaker wire.

Assign one of the two conductors as the negative conductor and the other as the positive conductor. Use these same designations for all system wiring. Always connect the conductors of the speaker wire appropriately to the corresponding negative and positive terminals on all system components. This will ensure that all components will work together (“in phase”). Connecting the speakers out of phase will not damage them but will result in reduced low

frequency output and impaired stereo effect.

Speaker wires may be fastened to the terminals by several methods. The most positive connection is made by directly connecting clean, bare connectors (exposed by stripping the ends of the wire) to the terminal posts.

For this type of connection, loosen the knobs on the terminals and insert the exposed (bare) ends of each speaker wire into the hole exposed on the terminal shaft (+ to +, - to -). Retighten the knob on each terminal so that a snug positive connection is achieved. Do not apply excessive force and do not overtighten. To avoid a short circuit, trim off any excess wire that is not in contact with the binding post contact surfaces.

Project EVEREST DD66000 terminals are also designed to accept spade or banana-type connectors which are fastened to the ends of the wires and, in turn, are attached to the terminal posts.

2 sets of input terminals of Project EVEREST DD66000 are compatible with

DD66000 specifications

The JBL DD66000 is a flagship model in the world of high-fidelity loudspeakers, designed to deliver an exceptional listening experience for audiophiles and music enthusiasts alike. With its rich heritage rooted in decades of acoustic engineering expertise, the DD66000 represents the pinnacle of JBL's commitment to superior audio performance.

One of the standout features of the DD66000 is its innovative three-way speaker configuration. This includes a 15-inch bass driver, a 4-inch midrange driver, and a high-frequency compression driver that produces crystal-clear treble. This arrangement allows for a wide frequency response, ensuring that every note, from the lowest lows to the highest highs, is reproduced with remarkable accuracy and detail.

The DD66000 boasts advanced technologies that enhance its performance. The Integrated Waveguide Technology ensures that sound is evenly distributed throughout the listening space, creating a spacious and immersive soundstage. This technology minimizes distortion and ensures that the sound maintains its clarity, even at high volumes. Additionally, the dual high-frequency compression drivers provide extended dynamic range, allowing the speaker to handle both quiet and loud passages seamlessly.

Another key characteristic of the JBL DD66000 is its robust build quality. The speaker is encased in an elegantly crafted cabinet that not only minimizes resonance but also adds to its aesthetic appeal. The sleek design incorporates high-quality materials, giving it a premium look that complements any audio setup.

The DD66000 is also versatile in its connectivity options. Designed to work seamlessly with various audio components, it features compatibility with both analog and digital sources. Audiophiles can enjoy their favorite music in high-resolution formats, ensuring that every detail is captured and enjoyed.

In summary, the JBL DD66000 is a masterful integration of advanced technology and superior craftsmanship. With its three-way configuration, cutting-edge sound dispersion technology, and solid build quality, it stands out as a premier choice for serious listeners. Whether used in a dedicated home theater or a high-end audio setup, the DD66000 promises to deliver an unrivaled listening experience, making it a worthy investment for those who demand the best in audio fidelity.