Hitachi CPX960WE Basic operations, Cancelling the Freeze function, Press the Freeze button

Page 15

Basic operations (continued)

[Freeze	function]	/
[Freeze	function]
This function	is used to freeze the image being displayed.
(refer to page	10)

p _nP

MUTE

C) @

BkANK AUTO TIMER

C)(2)C)

1 Press the FREEZE button.

•The image being displayed will freeze.

•The [ ] mark appears in the lower fight corner of the screen when the Freeze function is on.

Cancelling the FREEZE function I

1 Press the FREEZE button.

•The FREEZE function will be cancelled.

•The [ _ ] mark will be displayed for approximately 3 sec. when the FREEZE function is cancelled.

(Caution) • When there is no input signal, the Freeze function is not effective when the input signal is outside the sync range.

•Pressing the FREEZE button alternately turns the freeze function on and off.

•The FREEZE function will be cancelled when the input select button is pressed or the display mode of the PC being used for display is changed.

•When a still image signal is input when the FREEZE function is on, make sure not to forget to cancel the FREEZE function.

•FREEZE function will be cancelled after the operations such as "menu display ON"

"FOCUS", "MAGNIFY", "P in P", "AUTO", "VOLUME/\ _/", "MUTE" and "POSITION".

15

Image 15

Contents Features ContentsOutline Page Before Use Do not install on an unstable surface Avoid shock or impact onProjector Do not allow the laser beam to enter Eyes Do not position the power Cord under the projector. This canDo not place heavy objects on this Projector Do not touch the power plug with wet hands because thisWhen disconnecting Power plug, do not pull on the power Use the caster brakesMoving the projector Names and functions of each part Checking the package ContentsAudio OUT Names and functions of each partLaser Remote control transmitterP button *2 Video RGBBattery Battery Cover TCaution Battery usage cautionsCover ToD view Side view InstallationTypical LCD Projector and Screen Installation Using the adjustersTo project Basic operationsTurning off the power Plug & PlayPress the STANDBY/ON button for approximately 1 sec Press the Freeze button Cancelling the Freeze functionBasic operations FreezeChanging the magnification ratio Moving the display areaReturning to normal display Returning to the initial settings Adjustments and functionsMoves the image up and down Adjustments and functionsUsing the Setup Menu Adjustment itemAdjustment item Adjustment description System. When the screen is unstble no colorVideo Keystone BlankStart UP Sync on TimerCOM. Speed Auto OFFSignal Input jacks Connection to the video signal terminalsConnection to the RGB signal terminal Input signalsSignal mode Display Mode Connectiontothe RGBsignalterminalExample of computer signal ResolutionInitial set signals Horizontal signal timing Computer/Signal TimingVertical signal timimg lines Connecting the USB Mouse cable Product name Model Connection to the control signal terminalMouse functions MouseSignal Jack Serial mouseMouse 610 RS232C communicationColor Balance R Command Data ChartSystemvideo SizeRequesting projector status When data sent by the projector cannot be understoodExample of system setup Cleaning the Air filterFilterModel Screen displays LampMessage table When you think something wrongIndicators Symptom Possible causeControl Dimensional DiagramAbout repairs during the warranty period About the warranty and after-serviceAbout the warranty About after-service