Hitachi CPX960WE user manual Use the caster brakes, Do not place heavy objects on this Projector

Page 6

Do not sit or place heavy objects on this projector.

®Do not sit on this projector.

A

This could result in overturning, _"_ leading to damage or personal injury.

Use special caution in households where children are present.

Do not place heavy objects on this

projector.

Placing heavy objects on this projector

could result in loss of balance or falling

and cause personal injury.

Do not block the ventilation openings.

Do not block the ventilation openings of this projector. Blocking ventilation could lead

to internal overheating which could result in fire. Do not place this projector on its

side during use or push it into a small,

poorly ventilated location. Do not t,N

place this projector on a carpet or bedding or cover it with a table cloth,

etc. Also, when installing this projector, make sure the ventilation openings are at least 30cm from the wall.

Care and maintenance.

For safety purposes, disconnect the power

plug from the power outlet

before starting the care and

maintenance of this projector.

Disconnect the plug from the power outlet.

Battery usage.

®Use only the specified batteries with

this projector. Do not mix old A

and new batteries because this _'_

could result in fire or personal

injury due to battery cracking or

leakage.

®Make sure the plus and minus

terminals are correctly aligned A

when loading the batteries, f_k

Incorrect loading could result in

personal injury or contamination of

the surroundings due to battery cracking or

leakage.

Clean the projector interior once

every two years.

Request your dealer to clean the interior

of the

 

projector

approximately

every

two

years.

 

Accumulations

of

dust

inside

the

projector

 

can

result

in

fire

or

A

 

 

 

 

 

 

 

 

 

 

 

malfunction

if

not

cleaned

for

an

/€_

 

extended

period.

 

This

cleaning

is

/,'x

more

effective

if

performed

befor

 

 

every

humid

periods

such

as rainy

 

 

season, etc. Ask your dealer for details about internal cleaning.

Avoid installation in humid or dusty

locations.

®Do not install this projector in a humid

or dusty location. This could

result in fire or electrical shock.

®Avoid installation near the kitchen, a humidifier or other locations where there is oily smoke or humidity.

This could result in fire or electrical shock.

Use the caster brakes.

When installing this projector on a stand

with casters, use the caster A

brakes to prevent the stand

moving or overturning and causing personal injury.

Do not handle the power cord roughly.

®Keep the power cord away from heaters because the heat could melt the

power cord and cause fire or electrical shock.

Do not touch the power plug with wet hands because this

could result in electrical shock.

®When disconnecting the

power plug, do not pull on the power

cord. This could damage the power cord and

cause fire or electrical shock. Always grip the

plug when disconnecting.

6

Image 6
Contents Features ContentsOutline Page Before Use Do not install on an unstable surface Avoid shock or impact onProjector Do not position the power Cord under the projector. This can Do not allow the laser beam to enter EyesUse the caster brakes Do not touch the power plug with wet hands because thisWhen disconnecting Power plug, do not pull on the power Do not place heavy objects on this ProjectorMoving the projector Checking the package Contents Names and functions of each partNames and functions of each part Audio OUTVideo RGB Remote control transmitterP button *2 LaserBattery Battery Cover TCaution Battery usage cautionsCover Using the adjusters InstallationTypical LCD Projector and Screen Installation ToD view Side viewBasic operations To projectTurning off the power Plug & PlayPress the STANDBY/ON button for approximately 1 sec Freeze Cancelling the Freeze functionBasic operations Press the Freeze buttonChanging the magnification ratio Moving the display areaReturning to normal display Adjustments and functions Returning to the initial settingsAdjustment item Adjustments and functionsUsing the Setup Menu Moves the image up and downAdjustment item Adjustment description System. When the screen is unstble no colorVideo Keystone BlankStart UP Auto OFF TimerCOM. Speed Sync onInput signals Connection to the video signal terminalsConnection to the RGB signal terminal Signal Input jacksResolution Connectiontothe RGBsignalterminalExample of computer signal Signal mode Display ModeInitial set signals Horizontal signal timing Computer/Signal TimingVertical signal timimg lines Connecting the USB Mouse Connection to the control signal terminalMouse functions Mouse cable Product name ModelSignal Jack Serial mouseMouse RS232C communication 610Size Command Data ChartSystemvideo Color Balance RWhen data sent by the projector cannot be understood Requesting projector statusExample of system setup Cleaning the Air filterFilterModel Lamp Screen displaysSymptom Possible cause When you think something wrongIndicators Message tableDimensional Diagram ControlAbout after-service About the warranty and after-serviceAbout the warranty About repairs during the warranty period