Hitachi IPJ-AW250NM user manual Cleaning and replacing the air filter, 100

Page 100

Maintenance

Cleaning and replacing the air filter (continued)

9. Turn the projector on and reset the filter time using the FILTER TIME item in the EASY MENU.

(1)Press the MENU button to display a menu.

(2)Point at the FILTER TIME using the ▼/▲ button, then press the ► button. A dialog will appear.

(3)Press the ► button to select “OK” on the dialog. It performs resetting the filter time.

WARNING ►Before taking care of the air filter, make sure the power cable is not plugged in, then allow the projector to cool sufficiently. Taking care of the air filter in a high temperature state of the projector could cause an electric shock, a burn or malfunction to the projector.

►Use only the air filter of the specified type. Do not use the projector without the air filter or the filter cover. It could result in a fire or malfunction to the projector. ►Clean the air filter periodically. If the air filter becomes clogged by dust or the like, internal temperatures rise and could cause a fire, a burn or malfunction to the projector.

NOTE • Please replace the air filter when it is damaged or heavily soiled.

•When you replace the projection lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector.

•Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about the air filter.

•The projector may display the message such as “CHECK THE AIR FLOW” or turn off the projector, to prevent the internal heat level rising.

100

Page 99 Page 101
Image 100
Page 99 Page 101
Contents
About this manual ProjectorThank you for purchasing this projector Trademark acknowledgmentContents Features Checking the contents of packagePart names ProjectorHOT LargeControl panel STANDBY/ON button Buttons Focus +/- buttonsHdmi Computer IN2 1415Down button Volume + button Computer buttonMY Button 1 button MY Button 2 button Keystone button Zoom button Zoom + button Position button 26Setting up ArrangementArrangement Connecting with your devices About Plug-and-Play capability VCR/DVD/Blu-ray Disc Player ComputerConnecting with your devices Monitor Microphone system USB storage DeviceAccess point Computer HdmiConnecting to a power supply Using the security bar and slotSecurity bar Anti-theft chain or wire Security slotUsing the cable cover Remote control Installing the batteriesAbout the remote control signal Hitachi MAXELL, Part No.LR6 or R6PUsing as a simple PC mouse & keyboard Changing the frequency of remote control signalUSB Type B port Installing the battery Interactive penExchanging the tip of the pen Hitachi MAXELL, Part No. LR03Turning on the power Power on/offSTANDBY/ON button Power indicator Turning off the power Adjusting the volume Selecting an input signalOperating Temporarily muting the soundPress the MY Source / DOC. Camera button on Computer buttonVideo button MY SourceSearching an input signal For a computer signalFor an Hdmitm signal Selecting an aspect ratioAdjusting the projectors elevator Adjusting the zoom and focusZoom button Zoom + buttonUsing the automatic adjustment feature For a video signal and s-video signalFor a component video signal Focus buttonAdjusting the position Correcting the keystone distortionsPosition button Keystone buttonUsing the magnify feature Magnify ON/OFF buttonTemporarily freezing the screen Temporarily blanking the screenFreeze button Blank buttonUsing the menu function ESC button Reset buttonAdvanced Menu Enter buttonIndication in OSD On Screen Display Indication MeaningDescription InteractiveAspect ZoomPicture Mode ECO ModeReset MirrorInteractive menu Picture menu BrightnessContrast GammaCustom MID LOWCustom ColorSharpness PresentationOFF Active IrisFor an Hdmitm signal For a computer signalImage menu Signal, the range of this adjustment depends on Over Scan Selected will reset the H Position to the default settingPosition USB Type B or Hdmi portPhase Auto AdjustSize ExecuteInput menu TV Film OFFHigh MID LOW Video NRHdmi Format Video FormatHdmi Range Computer Auto Sync on G OFFFrame Lock Resolution Setup menu ShiftLeft MID Right No Input is Detected Sync is OUT of Range Invalid Scan FreqPerfect FIT Input button On OFFNormal Hinvert Vinvert Normal ECONormal Saving Volume Audio menuSpeaker Audio SourceMIC Volume Hdmi AudioMIC Level High LOWScreen menu English Français Deutsch EspañolMyScreen Capturing error has occurred. Please try againMyScreen registration is finished MyScreen Lock MessageSource Name Template Description Closed Caption DisplayMode ChannelOption menu Direct PowerComputer IN2 LAN USB Type a Video Video Hdmi USB Type B Auto Power OFFMouse USB Display USB Type BCancel Cancel OKLamp Time MY Button No Messenger Data appearsActive Iris Changes the active iris mode Picture Mode Changes the Picture ModeZoom Turns the D-ZOOM mode on/off. When the D-ZOOM Mode is on, use the / cursor buttons to adjustService FAN SpeedGhost Filter MessageKEY Lock Lens Door LockLens Door Open Lens Door Close1NORMAL 2HIGH Remote FreqControl port Serial Settings Baud Rate ServiceCommunication Type ParityResponse Limit Time Transmission MethodFactory Reset InformationNetwork menu SetupDhcp Default Setup GatewayIP Address SubnetProjector Name MY Image AMX D.DPresenter QuitPresentation Multi PC Section SwitchingUser Name Guide Password Security menuEnter to the Security menu SecurityTurning off the MyScreen Password Turning on the MyScreen PasswordMyScreen PIN Lock Turning on the PIN LockTurning off the PIN Lock If you have forgotten your PIN codeTurning on the Transition Detector Transition DetectorTurning off the Transition Detector Turning on the MY Text Password MY Text PasswordTurning off the MY Text Password MY Text WritingPresentation tools Interactive FunctionSystem requirements ApplicationInteractive Function Connection during use Using the pen Preliminary preparationBasic pen operation Customizing the penUsing StarBoard Software PC-LESS Presentation Supported storage mediaSupported format Supported file formatThumbnail mode Thumbnail menu Selected image Thumbnail imagesSetup menu for the selected image Operating by buttons or keysDown Enter InputOperating by the menu on the Thumbnail screen PC-LESS Presentation Full Screen Mode Slideshow mode Control Projector SoftwarePlay Playlist Example of playlist.txt filesHardware and software requirement for computer USB DisplayUSB Port USB cable 1 piece Right-Click menu Floating menu Options window Maintenance Replacing the lampType number DT01181 Replacing the lampHigh Voltage High Temperature Lamp warningType number UX37191 Filter set Cleaning and replacing the air filterStitched side On next Cleaning and replacing the air filter 100Hitachi MAXELL, part number CR2032 or CR2032H Replacing the internal clock battery101 Cleaning cloth 102Caring for the cabinet and remote control Maintenance of the pen sensors hornsMaintenance of the pen Inside of the projectorOther care 104Troubleshooting There is no input signalAn improper signal is input Related messagesButton operation is not available Internal temperature is rising106 Regarding the indicator lamps It is time to clean the air filter There is a possibility that the interior portionHas become heated Lens door is not opened properlyResetting all settings Signal cables are not correctly connected Volume is adjusted to an extremely low levelAudio SOURCE/SPEAKER setting is not correct Mode selected for Hdmi Audio is not suitableColor settings are not correctly adjusted Color Space setting is not suitableProjector is operating in Eco mode Frame Lock function cannot work on the current Input signalComputer cannot start up in the current hardware Saving function is workingCommunication Type for the Control port is Set to Network BridgeIs the use of USB cables disabled? Is the power of the projector turned on?Is the USB cable connected correctly? Is the system started up in the correct sequence?This may be due to poor contact of the battery Has the battery run out?Are you using more than one pen at the same time? Is the volume from the speaker of the projector too loud?StarBoard Software files may be corrupted, or Is the tip of the pen worn out?Is alignment of the pen position correctly performed? Is the projector inclined?Is a part of the image enlarged using the Magnify Function? Is the projector correctly installed?Is the computer image projected within the area Screen? End User License Agreement for the Projector Software Specifications117
Related manuals
Manual 2 pages 39.75 Kb
Top Page Image Contents