Hitachi IPJ-AW250NM user manual Monitor Microphone system, USB storage Device

Page 12

Setting up

Connecting with your devices (continued)

•If you insert a USB storage device, such as a USB memory, into the USB TYPE

A port and select the port as the input source, you can view images stored in the device (85).

•You can connect a dynamic microphone to the MIC port with a 3.5 mm mini-plug. In that case, the built-in speaker outputs the sound from the microphone, even while the sound from the projector is output. You can input line level signal to the MIC port from equipment such as wireless microphone. Select HIGH in the MIC LEVEL item of the AUDIO menu when you input line level audio signal to the

MIC port. In the normal mode, the volume of the microphone can be adjusted separately from the volume of the projector using the menu (48).

In the standby mode, the volume of the microphone is adjustable with the

VOLUME +/- buttons on the remote control, in synchronization with the volume of the projector (21).

Even when the sound of projector is set to mute mode by the AUDIO SOURCE function (47), the volume of the microphone is adjustable.

In both modes (standby or normal), the MUTE button on the remote control works on the sounds of the microphone and the projector (21).

Monitor

Microphone system

Speakers

(with an amplifier)

 

RGB IN

 

 

 

R L

USB storage

device

USB TYPE B HDMI

COMPUTER IN2

COMPUTER IN1

USB

TYPE A

DC5V

0.5A

LAN

CONTROL

MIC AUDIO IN1 AUDIO IN3 AUDIO S-VIDEO

R R

L L

AUDIO IN2

VIDEO

CAUTION ►Before removing the USB storage device from the port of the projector, be sure to use the REMOVE USB function on the thumbnail screen to secure your data (88).

NOTE • If a loud feedback noise is produced from the speaker, move the microphone away from the speaker.

• This projector doesn't support plug-in power for the microphone.

12(continued on next page)

Page 11 Page 13
Image 12
Page 11 Page 13
Contents About this manual ProjectorThank you for purchasing this projector Trademark acknowledgmentContents Features Checking the contents of packagePart names ProjectorHOT LargeControl panel STANDBY/ON button Buttons Focus +/- buttonsHdmi Computer IN2 1415Down button Volume + button Computer buttonMY Button 1 button MY Button 2 button Keystone button Zoom button Zoom + button Position button 26Setting up ArrangementArrangement Connecting with your devices About Plug-and-Play capability VCR/DVD/Blu-ray Disc Player ComputerConnecting with your devices Monitor Microphone system USB storage DeviceAccess point Computer HdmiConnecting to a power supply Using the security bar and slotSecurity bar Anti-theft chain or wire Security slotUsing the cable cover Remote control Installing the batteriesAbout the remote control signal Hitachi MAXELL, Part No.LR6 or R6PChanging the frequency of remote control signal Using as a simple PC mouse & keyboardUSB Type B port Installing the battery Interactive penExchanging the tip of the pen Hitachi MAXELL, Part No. LR03Power on/off Turning on the powerSTANDBY/ON button Power indicator Turning off the power Adjusting the volume Selecting an input signalOperating Temporarily muting the soundPress the MY Source / DOC. Camera button on Computer buttonVideo button MY SourceSearching an input signal For a computer signalFor an Hdmitm signal Selecting an aspect ratioAdjusting the projectors elevator Adjusting the zoom and focusZoom button Zoom + buttonUsing the automatic adjustment feature For a video signal and s-video signalFor a component video signal Focus buttonAdjusting the position Correcting the keystone distortionsPosition button Keystone buttonUsing the magnify feature Magnify ON/OFF buttonTemporarily freezing the screen Temporarily blanking the screenFreeze button Blank buttonUsing the menu function ESC button Reset buttonAdvanced Menu Enter buttonIndication in OSD On Screen Display Indication MeaningDescription InteractiveAspect ZoomPicture Mode ECO ModeReset MirrorInteractive menu Picture menu BrightnessContrast GammaCustom MID LOWCustom ColorSharpness PresentationOFF Active IrisFor a computer signal For an Hdmitm signalImage menu Signal, the range of this adjustment depends on Over Scan Selected will reset the H Position to the default settingPosition USB Type B or Hdmi portPhase Auto AdjustSize ExecuteInput menu TV Film OFFHigh MID LOW Video NRVideo Format Hdmi FormatHdmi Range Auto Sync on G OFF ComputerFrame Lock Resolution Setup menu ShiftLeft MID Right No Input is Detected Sync is OUT of Range Invalid Scan FreqPerfect FIT Input button On OFFNormal ECO Normal Hinvert VinvertNormal Saving Volume Audio menuSpeaker Audio SourceMIC Volume Hdmi AudioMIC Level High LOWScreen menu English Français Deutsch EspañolCapturing error has occurred. Please try again MyScreenMyScreen registration is finished MyScreen Lock MessageSource Name Template Description Closed Caption DisplayMode ChannelDirect Power Option menuComputer IN2 LAN USB Type a Video Video Hdmi USB Type B Auto Power OFFMouse USB Display USB Type BCancel OK CancelLamp Time MY Button No Messenger Data appearsActive Iris Changes the active iris mode Picture Mode Changes the Picture ModeZoom Turns the D-ZOOM mode on/off. When the D-ZOOM Mode is on, use the / cursor buttons to adjustService FAN SpeedGhost Filter MessageKEY Lock Lens Door LockLens Door Open Lens Door CloseRemote Freq 1NORMAL 2HIGHControl port Serial Settings Baud Rate ServiceCommunication Type ParityResponse Limit Time Transmission MethodFactory Reset InformationSetup Network menuDhcp Default Setup GatewayIP Address SubnetProjector Name MY Image AMX D.DQuit PresenterPresentation Section Switching Multi PCUser Name Guide Password Security menuEnter to the Security menu SecurityTurning on the MyScreen Password Turning off the MyScreen PasswordMyScreen PIN Lock Turning on the PIN LockTurning off the PIN Lock If you have forgotten your PIN codeTransition Detector Turning on the Transition DetectorTurning off the Transition Detector MY Text Password Turning on the MY Text PasswordTurning off the MY Text Password MY Text WritingPresentation tools Interactive FunctionSystem requirements ApplicationInteractive Function Connection during use Using the pen Preliminary preparationBasic pen operation Customizing the penUsing StarBoard Software PC-LESS Presentation Supported storage mediaSupported format Supported file formatThumbnail mode Thumbnail menu Selected image Thumbnail imagesSetup menu for the selected image Operating by buttons or keysDown Enter InputOperating by the menu on the Thumbnail screen PC-LESS Presentation Full Screen Mode Slideshow mode Control Projector SoftwarePlay Playlist Example of playlist.txt filesUSB Display Hardware and software requirement for computerUSB Port USB cable 1 piece Right-Click menu Floating menuOptions window Maintenance Replacing the lampType number DT01181 Replacing the lampHigh Voltage High Temperature Lamp warningCleaning and replacing the air filter Type number UX37191 Filter setStitched side On next Cleaning and replacing the air filter 100Replacing the internal clock battery Hitachi MAXELL, part number CR2032 or CR2032H101 Cleaning cloth 102Caring for the cabinet and remote control Maintenance of the pen sensors hornsMaintenance of the pen Inside of the projectorOther care 104Troubleshooting There is no input signalAn improper signal is input Related messagesInternal temperature is rising Button operation is not available106 Regarding the indicator lamps It is time to clean the air filter There is a possibility that the interior portionHas become heated Lens door is not opened properlyResetting all settings Signal cables are not correctly connected Volume is adjusted to an extremely low levelAudio SOURCE/SPEAKER setting is not correct Mode selected for Hdmi Audio is not suitableColor settings are not correctly adjusted Color Space setting is not suitableProjector is operating in Eco mode Frame Lock function cannot work on the current Input signalComputer cannot start up in the current hardware Saving function is workingCommunication Type for the Control port is Set to Network BridgeIs the use of USB cables disabled? Is the power of the projector turned on?Is the USB cable connected correctly? Is the system started up in the correct sequence?This may be due to poor contact of the battery Has the battery run out?Are you using more than one pen at the same time? Is the volume from the speaker of the projector too loud?StarBoard Software files may be corrupted, or Is the tip of the pen worn out?Is alignment of the pen position correctly performed? Is the projector inclined?Is the projector correctly installed? Is a part of the image enlarged using the Magnify Function?Is the computer image projected within the area Screen? Specifications End User License Agreement for the Projector Software117
Related manuals
Manual 2 pages 39.75 Kb

IPJ-AW250NM specifications

The Hitachi IPJ-AW250NM is an advanced interactive projector that caters to the needs of modern classrooms and meeting spaces. Designed for versatility and ease of use, it combines vivid image quality with innovative features that enhance collaboration and engagement.

One of the standout features of the IPJ-AW250NM is its impressive brightness level, reaching up to 2500 lumens. This ensures that images remain clear and vibrant even in well-lit environments, making it perfect for various applications. Whether used for presentations, educational purposes, or interactive workshops, the projector provides consistent performance.

Resolution-wise, the IPJ-AW250NM offers WXGA (1280 x 800) resolution, delivering sharp and detailed visuals. This resolution is particularly beneficial for displaying text-heavy content, such as spreadsheets and documents, as well as multimedia presentations, ensuring that every detail is easily visible to the audience.

In terms of interactivity, the IPJ-AW250NM is equipped with Hitachi's advanced interactive features, allowing users to engage with the content directly on the projection surface. This capability fosters collaboration among participants, as multiple users can interact simultaneously, making it ideal for brainstorming sessions and group activities.

The projector incorporates advanced technologies such as HDMI connectivity, allowing for seamless integration with various devices like laptops, tablets, and multimedia players. This flexibility enhances the user experience, enabling quick and easy setup for any presentation scenario.

Additionally, the IPJ-AW250NM boasts a long lamp life of up to 5000 hours in standard mode, significantly reducing maintenance and replacement costs over time. The projector also includes various Eco modes that optimize energy efficiency while maintaining quality output.

Portability is another highlight of the IPJ-AW250NM, as it is designed for easy transport between locations. Its lightweight design, combined with a compact structure, makes it convenient for users who need to move the projector between different classrooms or offices effortlessly.

Overall, the Hitachi IPJ-AW250NM interactive projector stands out for its combination of high brightness, interactive capabilities, and user-friendly features. Whether in education or business, it presents an opportunity to transform presentations and foster collaborative environments, ultimately enhancing the overall effectiveness of communication.
Top Page Image Contents