Hitachi CP-X935E specifications Basic operations, To project the picture, For 3 seconds

Basic operations

To project the picture

4

3

5

2		2	STANDBY/ON	MUTE
			FREEZE
STANDBY/ON			MAGNIFY VOLUME
	INPUT		OFF
MUTE			POSITION ON	LASER
	MENU	7
RESET
			RESET	RIGHT
		7	MENU ON	MOUSE ON
			BLANK	TIMER
			RGB	VIDEO
			INPUT

1

1		Turn the MAIN POWER switch of the projector on.[ I : ON]
		∙ The ON indicator will light up orange.
2		Press the STANDBY/ON button.
		∙ The ON indicator blinks (green) during warm-up and then lights (green).
		∙ Power cannot be turned on even if the STANDBY/ON button is pressed within 60 seconds after
		power is turned off, since the lamp has cooled preparing for next lighting.
3	Remove the lens cap.
4		Adjust picture size using the projection lens ZOOM knob.
5 Adjust focus using the projection lens FOCUS ring.
6		Power on all connected equipment.
		The method of connecting various equipment, see on the page 19~27.
7		Press the INPUT button or the INPUT SELECT (VIDEO or
		RGB) button to select the source of the signal to be projected
		on the screen.	Example on-screen display
		∙ The selected signal input is displayed at the bottom right of the screen
		for 3 seconds.
				RGB1

12

Downloaded from www.Manualslib.com manuals search engine