Hitachi CP-X935E Before use, Instructions to Users, Video signal cables, Power cord, Video inputs

Page 3

WARNING:This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications, Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Instructions to Users:

This equipment complies with the requirements of FCC (Federal Communication Commission) Class A equipments provided that following conditions are met.

(1) Video signal cables:

Double shielded coaxial cables (so called FCC shield cable) must be used and the outer shield must be connected to the ground. Or, if normal coaxial cables are used, the cables must be enclosed in metal pipes or similar way to reduce the interference noise radiation.

(2) Power cord:

Shielded power cord must be used. The outer shield must be connected to the ground.

(3) Video inputs:

The input signal amplitude must no exceed the specified level.

Before use

(Before Use)

Illustrated marks Various illustrated marks are used in this product and instruction manual so the product is used correctly and safely, and also to protect you and others from danger and your property from being damaged.

This shows that a person could be killed or injured if the Warning wrong operation is done by ignoring this indication.

Caution This shows that a person could be injured or material may be damaged if the wrong operation is done by ignoring this

indication.

ENGLISH

Examples of

illustrated marks

The mark informs you that there is a warning (including caution). The concrete details of the warning (the left diagram shows the caution for an electric shock hazard) is shown in the diagram.

The mark informs you of a prohibited action. The concrete prohibited action (the left diagram shows the prohibition of disassembly) is drawn in the diagram or near it.

The mark informs you of actions you must do. The concrete instruction details (the left diagram shows "Disconnect the power plug from the power outlet") is drawn in the diagram.

3

Downloaded from www.Manualslib.com manuals search engine

Image 3
Contents Operating Guide FeaturesContents OutlineFor the Customers in U.K Instructions to Users Video signal cablesPower cord Before useIf any abnormality occurs Do not look directly at the lens when Lamp is litDo not install this unit in an unstable place Do not use power supplies other Than that specifiedDo not step on this unit or do not put a Heavy object on it Be careful in handling the power cordCleaning Handle the power cord carefullyVolume When you are not going to use For a long timeClean inside the unit at least once two years Do not place this unit where it gets hotNames and functions of each part Contents of shipping boxRGB/VIDEO Disk PAD Remote control transmitterLaser Aperture Names and functions of each partInstallation Example of the projector and screen installationHow to use foot adjusters For 3 seconds ∙ The on indicator will light up orangeBasic operations To project the picturePLUG&PLAY To turn off the powerIndicator lights up orange Standby modeMagnifying Function Freeze Function∙ On-screen menus are displayed on the screen Adjustments and functionsTo return to the initial setting Memory functionSET UP How to use the SET UP menuManual Operation Auto Confirm Screen Auto-adjustmentDuring AUTO-adjustment InputReveal ImageOPT BlankConnection to the RGB signal terminal Connection to the video signal terminalsExample of computer signal Resolution Standard Display Dots KHzText Horizontal Timing µs Initial set signalsComputer/signal Horizontal Timing µs Computer/signal Vertical Timing linesControl signal terminal Connection to the control signal terminalPS/2 mouse ADB Mac mouseSerial mouse RS232C cable Reference Control command tableControl command table CommunicationColor Balance Auto AdjustControl data table Video SystemExample of command error Procedure of getting the Projector statusProcedure of setting the Projector status Procedure of default setting the Projector statusComputerDesk type Example of system setupConnecting various equipment AC Inlet Computer Note typeAir filter Cleaning the air filterOption lamp Lamp unit CP-X935W/E DT00201 How to replace lampRemove the lamp cover LampAction MessageBlink in the following cases Message tableBatteries LR6 Dimension diagramVideo Audio