2) When the server switch unit enters the hot key mode by pressing the Ctrl key twice:
If you press the Ctrl key twice quickly to enter the server switch unit into the hot key mode, the OSD display appears at the upper left corner of the screen.
a)Description of screen
1.The status of the server switch unit appears by the OSD display at the upper left corner of the screen.
2.Before the switching, the character background is displayed red.
3.After the switching, the character background is displayed blue, the connection is completed, and the operation is terminated in the hot key mode. After about three seconds, the OSD display disappears.
b)Server switching procedure
The screen display may be switched to another by pressing the numeric key of the desired server when the background of characters is displayed red.
You can switch a server to another by pressing the proper one of the 1 to 8 keys. In the cascade connection, select the master side by pressing the proper one of the 1 to 8 keys and the slave side by pressing the appropriate one of the F1 to F8 keys.
The key operation enables the screen display to be switched from one to another directly.
The proper switching allows the server switch unit to exit from the hot key mode.
If the character background is displayed red, you cannot provide any key entry or mouse operation for the server.
To change the screen display to that with blue character background (or to terminate the hot key mode), press the proper number, Esc, or Enter key.
If you press the 0 (zero) key on the screen with red character background, the mode of the server switch unit is changed to the auto scan mode. The auto scan mode is terminated by either of the following methods:
Press the Auto Scan switch or the Enter key. Then the screen is switched to that displayed currently.
Press the Esc key. Then the server selected at the start of the auto scanning is selected.
Tips
Notice
For the
The Auto Scan and Hot Key are disabled during server startup. If you erroneously pressed the Auto Scan key, cancel the Auto Scan mode, and select all servers with Server Selection key to check if the startup processes are in normal progress. If you execute the hot key operation, press the Reset switch of the server switch unit to restart the server switch unit.
- 63 -