NEC GT6000 user manual Introduction, Terminal Panel Features

1. Introduction

Terminal Panel Features

2 1

DVI AUDIO Input Mini Jack (Stereo Mini)

This is where you connect the audio output from your com- puter when connected to the DVI input. A commercially avail- able audio cable is required.

AUDIO

	AUDIO OUT		RGB 1
7			SLOT 1
	L/MONO		L/MONO
	R	AUDIO	R

RGB 2

R/Cr

G/Y

RGB OUT

4

B/Cb

VIDEO S-VIDEO

H/

HV

V

L/MONOL/MONO

RR

5 6

DVI 3

SLOT 2

8

4. RGB OUT Connector (Mini D-Sub 15 Pin)

You can use this connector to loop your computer image to an

external monitor from the RGB 1 or 2 input source.

5. VIDEO IN Connector (BNC)

Connect a VCR, DVD player, laser disc player, or document

camera here to project video.

VIDEO AUDIO Input Jacks R/L (RCA)

These are your left and right channel audio inputs for stereo

sound from a Video source.

6. S-VIDEO IN Connector (Mini DIN 4 Pin)

Here is where you connect the S-Video input from an external

source like a VCR.

NOTE: S-Video provides more vivid color and higher resolution than the tradi-

tional composite video format.

S-VIDEO AUDIO Input Jacks R/L (RCA)

These are your left and right channel audio inputs for stereo

sound from an S-Video source.

7. AUDIO OUT Jacks R/L (RCA)

You can use this connector to output sound from the currently

selected input source (RGB 1, RGB 2, DVI (DIGITAL), Video

or S-Video).

1.RGB 1 Connectors [R/Cr, G/Y, B/Cb, H/V, V] (BNC)

Connect R,G,B,H (Horizontal sync) and V (Vertical sync) out- puts of external equipment.

If using a component with a combined sync (SYNC) output, connect it to the H/V terminal. When using luminance and color- difference signals of HDTV and DVD, connect Pr/Cr to the R, Y to the G and Pb/Cb to the B input of the projector.

RGB 1 Audio Input Jacks (RCA)

L/MONO: This is your left channel audio input for stereo sound coming from the RGB Input 1 source.

This also serves as your monaural audio input.

R: This is your right channel audio input for stereo sound from the RGB Input 1 source.

2.RGB 2 Connector (Mini D-sub 15 Pin)

Connect your computer or other analog RGB equipment such as IBM compatible or Macintosh computers. This also serves as a component input connector that allows you to connect a component video output of component equipment such as a DVD player. This connector also supports SCART output sig- nal. See page 2-9 for more details.

RGB 2 Audio Iput Mini Jack (Stereo Mini)

This is where you connect audio output from your computer or DVD player connected to the RGB2 input. A commercially avail- able audio cable is required.

3.DVI IN Connector (DVI-D 24 Pin)

This connector can be used to accept digital signal output from a computer with a DVI connector.

Output sound level can be adjusted in accordance with the

sound level of the internal speaker.

8. Slot 1/2

For optional RGB, SDI or DVI board.

1-8