8. Using
Selecting Menu Display Time
This option allows you to select how long the projector waits after the last touch of a button to turn off the menu.
The preset choices are "Manual", "Auto 5 sec", "Auto 15 sec", and "Auto 45 sec". The "Auto 45 sec" is the factory preset.
Manual | The menu can be turned off manually. |
Auto 5 sec ... The menu will automatically be turned off in 5 seconds if no buttons are pressed within 5 sec- onds.
Auto 15 sec . The menu will automatically be turned off in 15 seconds if no buttons are pressed within 15 sec- onds.
Auto 45 sec . The menu will automatically be turned off in 45 seconds if no buttons are pressed within 45 sec- onds.
Selecting Date Format
Eight display formats can be selected. This date format sets the current date that appears on the upper left corner of the screen.
Setting the Current Date and Time [Date, Time Preset] You can set the current time, month, date, and year.
1. Type in date.
Enter month, date and year in this order using Source/Input buttons on the remote control.
Month and date must be entered in two digits. For example, to display "February", press "0" and "2".
2. Type in time.
Time is expressed in the
3.Select "OK" and press ENTER.
Closing the window allows the clock to start.
The current year, month, date and time are displayed on the top of the screen.
NOTE: The projector has a
[Page 2]
Display Select
You can choose the desired status information to be displayed on the screen.
The information selections are:
Date, Time, Input Terminal, Source Name, Projector ID and Message.
The Message selections are:
Lamp life warning, lamp error,
[Page 3]
Selecting Menu Color [Menu Color Select]
You can choose between two color modes for menu color: color and monochrome.
Selecting Mouse Pointer Icon [Mouse Pointer]
This enables you to select from nine different mouse icons when using a USB mouse.
NOTE: There may be cases where the Pointer function is not available (ex. a non- interlace signal at 15kHz such as video game.)