NEC GT6000 user manual Installation, 2-17, Connecting to a Network, Example of LAN connection

2. Installation

Connecting to a Network

With the LAN connection, you can control the projector over the network using a computer to switch the unit on/off, select the input and others.

*To control the projector over the network using a computer, use the Dynamic Image Utility 2.0 contained on the User Supportware CD-ROM or the HTTP Server feature.

*With the Image Express Utility 1.0 contained on the supplied User Supportware CD-ROM, you can project your PC screen image to the projector over the network.

*With a use of the supplied User Supportware CD-ROM and the optional wireless LAN card (SWL-2100-N*), you can control the projector wirelessly or send your PC screen image to the projector over the network using a computer.

Example of LAN connection

Server

Hub

LAN cable (not supplied)

		AUDIO	DVI
AUDIO OUT		RGB 1
		OPTION 1	OPTION 2
L/MONO		L/MONO
R	AUDIO	R

RGB 2

R/Cr

G/Y

RGB OUT

B/Cb

VIDEO S-VIDEO

H/HV

V

L/MONOL/MONO

		2
USB(MOUSE/HUB) USB (PC)	PC CARD	1	LAN
PC CONTROL		LAN
IN
		REMOTE 1
OUT
SC TRIGGER		REMOTE 2
	IN	OUT
		AC IN

RR

Using the HTTP Server function

1.Configure your LAN settings such as IP address on the pro- jector. (See “LAN Mode” on page 8-19)

2.Start the Web browser on the computer connected to the net- work and execute HTTP server functions. (See “Operation Using an HTTP Browser” on page 10-11)

Using the User Supportware

1.Configure your LAN settings such as IP address on the pro- jector. (See “LAN Mode” on page 8-19)

2.Install the software contained on the User Supportware CD- ROM into the computer connected to the network. See “6 Us- ing the Projector in a Network” on page 6-1.

NOTE: To control the projector from the PC connected to a network, from the Advanced menu select [Projector Options] → [Setup] → [Page 4] and then place a check mark on “Idle Mode”. See page 8-17.

2-17